display TOYOTA 4RUNNER 2007 N210 / 4.G Navigation Manual

11 4
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see
“Registering the speed tone” on page
117.)
5U5270G
1. Touch “Speed Tone”.
5U5271G
2. Touch the desired switch to send a
tone.
(e) Change the settings of the
Bluetooth phone
5U5162G
Touch “Settings” to display “Settings”
screen.
5U5163G
You can change the settings of the phone.(i) Registering the speed dial
You can register the desired telephone
number from phone book, dialed numbers
and received calls. Up to 17 speed dial
numbers can be registered.
The 6th entry is the speed dial for redialing.
5U5164G
1. Touch “Speed Dial” to display the
“Speed Dial Settings” screen.

11 7 (ii) Registering the speed tone
You can register the desired tone number.
Up to 6 speed tone numbers can be regis-
tered.
5U5272G
1. Touch “Register” of “Speed Tone”.
5U5273G
2. Use the software keyboard to input the
name.
5U5274G
3. Input the number and touch “OK”.
5U5275G
4. Touch the desired touchscreen but-
ton you want to register in.
5U5276G
5. If you select a touchscreen button you
register before, this screen is displayed.
Touch “YES” if you want to overwrite it.

11 9
5U5283G
3. Touch “YES”.
Deleting all the speed tone
5U5284G
1. Touch “Delete All” of “Speed Tone”.
5U5285G
2. Touch “YES”.(iii) Setting the volume
5U5175G
1. Touch “Volume” to display the
“Volume Setting” screen.
5U5176G
2. Touch “” or “+” to adjust the “Voice
Volume” or “Ring Volume”.
Voice Volume Adjusting the other party’s. .
voice.
Ring Volume Adjusting the ring volume.. . .

120
Automatic volume settings for high
speed
You can set the volume one step up when
the speed is over 80 km/h. (When it is un-
der 70 km/h, previous volume is back.)
Each time you touch “Adaptive Volume
Control”, you can switch on or off.Initializing the settings
You can initialize the settings.
5U5176G
Touch “Default”.
5U5177G
Touch “YES”.(iv) Setting the screen
5U5178G
1. Touch “Screen” to display the “Screen
Settings” screen.
5U5179G
2. Do the detail settings of the screen and
touch “OK”.

121
Receiving Call Display
You can select the method of the receiving
call display.
5U5179G
Touch “Full” or “Icon”.
Full mode When a call is received, the . . . . .
Hands−free screen is
displayed and you can
operate it on the screen.
Icon mode The message is displayed. . . . .
on the upper side of the
screen. You can only
operate the steering
switch.
Auto answer
When a call is received, the display auto-
matically changes to the talking screen
and you can start to talk on the phone
(without touching any switch) after the
preset time.
5U5180G
Touch “On” of “Auto Answer” and “” or
“+” to adjust the waiting time of auto an-
swer within 1 60 seconds.
The Bluetooth connection status at
startup
5U5309G
When the ignition switch is set at ACC or
ON and the Bluetooth is automatically
connected, the connection check is dis-
played.
5U5180G
Touch “On” or “Off” of “Show Bluetooth∗
connection status at start up”.
∗: Bluetooth is a registered trademark of Blue-
tooth SIG. Inc.

122
Initializing the settings
You can initialize the settings.
5U5180G
Touch “Default”.
5U5181G
Touch “YES”.(v) Setting the phone book
You can register phone numbers in the
phone book.
5U5182G
Touch “Phone Book” to display the
“Phone Book Management” screen.
5U5183G
You can do the detail settings of phone
book.
Transferring a telephone number
You can transfer the telephone numbers in
your Bluetooth
 phone to the system. Up
to 1000 person’s data (up to 2 numbers a
person) can be registered in the phone
book.
Transfer it while the engine is running.
5U5184G
1. Touch “Transfer Data” to display
“Select Group” screen.

123
5U5185G
2. Select the group you want to transfer
to.
5U5186G
3. Touch “Overwrite” or “Add to”.
5U5187G
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel”. If the transferring
is interrupted on the way, the phone book data
transferred until then can be memorized in the
system.
5U5188G
5. When this screen is displayed, the
transfer is completed.
5U5189G
When this screen is displayed, try the
transfer operation again.

124
Registering the phone book data
You can register the phone book data.
5U5190G
1. Touch “Register” of “Phone Book”.
5U5191G
2. Touch the desired touchscreen but-
ton to edit the phone book.
5U5192G
3. When you complete the edit, touch
“OK”.
Editing the name
When you don’t input the name, the num-
ber is displayed.
5U5193G
1. Touch “Name”.
5U5194G
2. Use the software keyboard to input the
name.

125
Editing the phone number
You can register the phone number in
“TEL1” and “TEL 2” separately. Up to 2
numbers a person can be registered.
5U5195G
1. Touch “TEL 1” or “TEL 2”.
5U5196G
2. Input the number and touch “OK”.
5U5197G
3. Select the desired icon.
Selecting the group
You can set a group for a contact (for ex-
ample: “Family”, “Friends”, “Office”...). It
will then be easier for you to find this con-
tact when needed, by using the group dis-
play.
You can select “No group” or “Group 01”
to “Group 19”.
“No group” is displayed if you don’t set the
group.
5U5198G
1. Touch “Group”.

130 3. When you select “Group Data”, the
“Select Group” screen is displayed.
5U5217G
4. Select the desired group.
5U5218G
5. Touch “YES”.You can also delete it in the following way.
5U5219G
1. Touch “Phone Book”.
5U5220G
2. Touch “Delete All”.
5U5221G
3. Touch “YES”.