mirror TOYOTA C-HR 2021 Owners Manual (in English)
Page 6 of 56
4
OVERVIEWInstrument cluster
Indicator symbols
For details, refer to “Warning lights and indicators,” Section 2, 2021 Owner’s
Manual.
Automatic High Beams (AHB)
indicator
Electric power steering system
warning [red/yellow]1
BSM outside rear view mirror
indicators1,4
Charging system warning
Brake Override System/
Drive-Start Control ECO MODE indicator
Eco Driving Indicator
Arrow direction indicates fuel tank
door position
Anti-lock Brake System (ABS)
warning1
Blind Spot Monitor (BSM) OFF
indicator1,4
Brake system warning [red]1
Brake system warning [yellow]1
Brake hold operating indicator1,2,3
Brake hold standby indicator1
“AIRBAG ON/OFF” indicator1
AIRBAG SRS warning1
Service indicators and warning lights
Driver’s and front passenger’s seat
belt reminder (alarm will sound
when the vehicle is on)
Constant speed cruise control
indicator/Constant speed
cruise control SET indicator
Full-Speed Dynamic Radar
Cruise Control (DRCC)
indicator/DRCC SET indicator
Tachometer
Outside temperature
Fuel gauge
Shift position and
shift range
Engine coolant
temperature gauge
Odometer/
trip meterMulti-Information Display
Speedometer
64380_Txt_MY21_C-HR.indd 47/21/20 10:32 AM
Page 20 of 56
18
FEATURES & OPERATIONSAir conditioning/heating
“SYNC” button
ON: Synchronized
temperature settings for
driver and passengers.
OFF: Separate
temperature settings for
driver and passengers.
ECO mode switch**
Air conditioning
ON/OFF
Temperature display
Recirculate
cabin air
Climate
control OFF
Outside rear view mirror*/
Rear defogger Windshield wiper
de-icer (if equipped) Fan speed
Windshield
airflow/defogger
Automatic climate control ON
Adjusting the temperature setting will cause
the airflow vents, air intake and fan to
adjust automatically to set temperature.
Airflow vent
In “” or “” mode, use outside air (“”
indicator OFF) to reduce window fogging.
Adjusters
UP: Increase temperature/fan
speed/change airflow mode.
DOWN: Decrease temperature/fan
speed/change airflow mode.
* Defoggers automatically turn off after a period of time.
** Air conditioning feature that helps lower fuel consumption by controlling and prioritizing functions like reducing fan speed, etc.
64380_Txt_MY21_C-HR.indd 187/21/20 10:32 AM
Page 24 of 56
22
FEATURES & OPERATIONSBlind Spot Monitor (BSM)* and
Rear Cross Traffic Alert (RCTA)*
IndicatorIndicator
Buzzer (RCTA only) * If equipped
Indicators
The system is designed to use radar sensors to detect vehicles traveling in the
C-HR’s blind spot when changing lanes. If a vehicle is detected, the driver will be
alerted via the outside rear view side mirror indicators.
While in reverse, when a vehicle approaching from the right or left rear of the C-HR
is detected, the outside rear view mirror indicators will flash and the RCTA buzzer
will sound.
BLIND SPOT MONITOR (BSM)
REAR CROSS TRAFFIC ALERT (RCTA)
(1) Press “” switches and select “” from the Multi-Information Display (MID).
(2) Press “
” switches and select “” and then press “.” The setting screen
is displayed.
(3) Press “
” switches and select the “BSM function on/off” or “RCTA function on/
off” and then press “
.”
(4) Press “
” to go back to the menu.
Refer to the Owner’s Manual for limitations and more details on this system before
attempting to use it.
SYSTEM ON/OFF
64380_Txt_MY21_C-HR.indd 227/21/20 10:32 AM
Page 27 of 56
25
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Sensors
TSS 2.5 combines a forward-facing camera mounted in front of the inside rear view
mirror and a grille-mounted radar mounted in the front grille. These sensors support
the driver assist systems.
Forward-facing camera
Grille-mounted radar
The Pre-Collision System with Pedestrian Detection (PCS w/PD) is designed to
help detect a vehicle, a bicyclist, or a pedestrian in certain situations. Using both
a camera and radar, PCS w/ PD can provide an audio/visual alert to warn you of
a possible collision under certain circumstances. If you don’t react, the system is
designed to automatically brake.
As there is a limit to the degree of recognition accuracy and control performance
that this system can provide, do not overly rely on this system. This system will not
prevent collisions or lessen collision damage or injury in every situation. Do not use
PCS w/PD instead of normal braking operations under any circumstances. Do not
attempt to test the operation of the pre-collision system yourself, as the system may
not operate or engage, possibly leading to an accident. In some situations, such as
when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or
while driving on a curve and for a few seconds after driving on a curve, a vehicle or
pedestrian may not be detected by the radar and camera sensors, preventing the
system from operating or engaging properly.
See Toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system operation may be limited.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
64380_Txt_MY21_C-HR.indd 257/21/20 10:32 AM