TOYOTA CAMRY 2007 XV40 / 8.G Owners Manual

’07Camry_U (L/O 0608)
233
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
(c) Call History
1. Push the talk switch and say “Call his-
tory”, or turn the “AUDIO CTRL” knob
until “Call history” is displayed and
push the knob.
“Call history. Push the talk switch and say
incoming or outgoing.” is heard and “Call
History” is displayed.
2. Select one of the following:
Incoming
Outgoing
Incoming
1. Push the talk switch and say “Incom-
ing”, or turn the “AUDIO CTRL” knob
until “Incoming” is displayed and push
the knob.
“Most recent incoming call was XXXX” is
heard and the incoming number is dis-
played.
“Push the talk switch and say confirm.
Otherwise, say previous, or go back.” is
heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until the
dial number that you want to register
is displayed and push the knob.
Next, input a voice tag.
For further details, see page 231.Outgoing
1. Push the talk switch and say “Outgoin-
g”, or turn the “AUDIO CTRL” knob
until “Outgoing” is displayed and push
the knob.
“Most recent outgoing call was XXXX” is
heard and the outgoing number is dis-
played.
“Push the talk switch and say confirm.
Otherwise, say previous, or go back.” is
heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until the
dial number that you want to register
is displayed and push the knob.
Next, input a voice tag.
For further details, see page 231.(d) Manual Input
1. Turn the “AUDIO CTRL” knob until
“Manual Input” is displayed and push
the knob.
2. Turn the “AUDIO CTRL” knob to select
a number. Push the “AUDIO CTRL”
knob to set.
3. When the number is set, push the
“AUDIO CTRL” knob.
Next, input a voice tag.
For further details, see page 231.
INFORMATION
The system can recognize single
digits from zero to nine, #(pound),
∗(star), and +(plus). Numbers that
are ten or greater are not recog-
nized.
To speed up input, it is a good idea
to group all digits into a continuous
string. However, you can enter each
digit individually or group digits to-
gether in preferred string lengths.
The display corresponding to each op-
eration appears on the screen as fol-
lows:

’07Camry_U (L/O 0608)
234
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
Input operation—
You say: “Nine, nine, five”
Voice output: “995 to store push the
talk switch and say confirm. Other-
wise, continue adding numbers, or
say go back, or delete.”
Display: “995”
You say: “Seven, three, four”
Voice output: “734 to store push the
talk switch and say confirm. Other-
wise, continue adding numbers, or
say go back, or delete.”
Display: “995734”
Repeat the above procedure until the
entire number that you want to regis-
ter is input.
Go back operation—
You say: “Go back”
Voice output: “Go back. The last num-
bers said have been removed. Push
the talk switch and say the number.”Display: “995”
Repeating the above operation deletes
the last digits in reverse order of in-
put.
Delete operation—
You say: “Delete”
Voice output: “Deleted. Push the talk
switch and say the number.”
Display: “Delete”
The display will return to the initial
screen that allows a number to be
input.To list names
The voice tags can be edited during the
name playback.
1. Push the talk switch and say “List
names”, or turn the “AUDIO CTRL”
knob until “List Names” is displayed
and push the knob.
“List names. To select a name, push the
talk switch during the name playback.” is
heard.
2. Follow voice guidance instructions.
“XXXX selected.” is heard and “Selected”
is displayed.
If you push the off−hook switch during the
name playback, you can dial the number
of the selected name.

’07Camry_U (L/O 0608)
235
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
Editing the voice tags
The following can be performed:
Dial
Change Name
Delete Entry
Speed Dial
“Push the talk switch and say dial, change
name, delete entry, or set speed dial.” is
heard and “Selected” is displayed.
Dial
Push the talk switch and say “Dial”, or
turn the “AUDIO CTRL” knob until “Dial”
is displayed and push the knob.
Change Name
Push the talk switch and say “Change
name”, or turn the “AUDIO CTRL” knob
until “Change Name” is displayed and
push the knob.
For further details, see page 236.Delete Entry
Push the talk switch and say “Delete
entry”, or turn the “AUDIO CTRL” knob
until “Delete Entry” is displayed and push
the knob.
For further details, see page 235.
Speed dial
Push the talk switch and say “Set speed
dial”, or turn the “AUDIO CTRL” knob until
“Speed Dial” is displayed and push the
knob.
For further details, see page 237.To delete entry
1. Push the talk switch and say “Delete
entry”, or turn the “AUDIO CTRL” knob
until “Delete Entry” is displayed and
push the knob.
“Delete entry. Push the talk switch and
say the name to delete.” is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until the
name that you want to delete is dis-
played and push the knob.
When using a voice command:
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO CTRL” knob until “Confirm” is
displayed and push the knob.
“Deleted. Returning to the phone book.” is
heard and “Deleted” is displayed.
When using the knob:
“Deleted. Returning to the phone book.” is
heard and “Deleted” is displayed.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.

’07Camry_U (L/O 0608)
236
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
To delete speed dial
1. Push the talk switch and say “Delete
speed dial”, or turn the “AUDIO CTRL”
knob until “Del Spd Dial” is displayed
and push the knob.
“Delete speed dial. Push the preset button
to delete from speed dial.” is heard.
2. Select the preset button that you want
to delete.
“To delete preset... push the talk switch
and say confirm. Otherwise, say go back.”
is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard and “Deleted” is dis-
played.
“Returning to the phone book.” is heard.
The system may not function in the follow-
ing cases:
If no speed dial has been registered.
If the preset button has not been as-
signed.To change name
1. Push the talk switch and say “Change
name”, or turn the “AUDIO CTRL” knob
until “Change Name” is displayed and
push the knob.
“Change name. Push the talk switch and
say the name to change.” is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until the
dial number that you want to change is
displayed and push the knob.When using a voice command:
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
1. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Push the talk switch and say a new
name.” is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Record Name” is displayed, push the
knob and say “XXX (new name)”.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
book.” is heard and “Changed” is dis-
played.

’07Camry_U (L/O 0608)
237
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
When using the knob:
“Push the talk switch and say a new
name.” is heard.
1. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Record Name” is displayed, push the
knob and say “XXX (new name)”.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
book.” is heard and “Changed” is dis-
played.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.To set speed dial
1. Push the talk switch and say “Set
Speed dial”, or turn the “AUDIO CTRL”
knob until “Speed Dial” is displayed
and push the knob.
“Set speed dial. Push the talk switch and
say a name.” is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until the
dial number that you want to register
is displayed and push the knob.When using a voice command:
“XXXX To register this as a speed dial
entry, push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
1. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Push the preset button to assign to
XXXX” is heard.
2. Push and hold the desired preset but-
ton.
“preset... is now assigned. Returning to
the phone book.” is heard.
When using the knob:
“Push the preset button to assign to
XXXX” is heard.
Push and hold the desired preset button.
“preset... is now assigned. Returning to
the phone book.” is heard.
The system may not function in the follow-
ing cases:
If no name has been registered.
If the system does not recognize the
voice command.

’07Camry_U (L/O 0608)
238
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
INFORMATION
A shortcut to each of the following
functions is available. Push the off
hook switch and talk switch, and say
one of the following:
Phone book add entry
Phone book change name
Phone book delete entry
Phone book delete speed dial
Phone book list names
Phone book set speed dial
The following can be performed:
Dial
Delete
Store
To enter the redial
1. Push the off−hook switch to turn the
hands−free system on.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Redial” is displayed and push the
knob.
“Redial. Most recent outgoing call was
XXXX” is heard and outgoing history is
displayed.
“Please push the off−hook switch to dial.
Otherwise, push the talk switch and say
dial, previous, go back, store, or delete.”
is heard.Dial
Turn the “AUDIO CTRL” knob until the
number that you want to dial is displayed
and push the knob. After that, do the one
of the following:
Push the off−hook switch.
Push the talk switch and say “dial”.
Turn the “AUDIO CTRL” knob until
“Dial” is displayed and push the knob.
Delete
1. Turn the “AUDIO CTRL” knob until the
dial number that you want to delete is
displayed and push the knob.
2. Push the talk switch and say “Delete”,
or turn the “AUDIO CTRL” knob until
“Delete” is displayed and push the
knob.
“Delete. Push the talk switch and say con-
firm. Otherwise, say go back” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard.
—Redial

’07Camry_U (L/O 0608)
239
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
Store
1. Turn the “AUDIO CTRL” knob until the
dial number that you want to register
is displayed and push the knob.
2. Push the talk switch and say “Store”,
or turn the “AUDIO CTRL” knob until
“Store” is displayed and push the knob.
“Store. Push the talk switch and say con-
firm. Otherwise, say go back.” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 231.
The system may not function in the follow-
ing cases:
If there is no outgoing history.
If the phone book is locked.
INFORMATION
Up to five outgoing calls can be
stored in the system.
When five outgoing calls are stored
in memory, the oldest outgoing call
is deleted to make room in memory
for new calls.
Only the latest outgoing call is
stored when the same telephone
number is dialed.
A shortcut to “Redial” is available.
Push the offhook switch and then
push the offhook switch.
The following can be performed:
Dial
Delete
Store
To enter the callback
1. Push the off−hook switch to turn the
hands−free system on.
2. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Callback” is displayed and push the
knob.
“Callback. Most recent incoming call was
XXXX” is heard and incoming history is
displayed.
“Please push the off−hook switch to dial.
Otherwise, push the talk switch and say
dial, previous, go back, store, or delete.”
is heard.
—Callback

’07Camry_U (L/O 0608)
240
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
Dial
Turn the “AUDIO CTRL” knob until the
number that you want to dial is displayed
and push the knob. After that, do the one
of the following:
Push the off−hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CTRL” knob until
“Dial” is displayed and push the knob.
Delete
1. Turn the “AUDIO CTRL” knob until the
dial number that you want to delete is
displayed and push the knob.
2. Push the talk switch and say “Delete”,
or turn the “AUDIO CTRL” knob until
“Delete” is displayed and push the
knob.
“Delete. Push the talk switch and say con-
firm. Otherwise, say go back” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard.Store
1. Turn the “AUDIO CTRL” knob until the
dial number that you want to register
is displayed and push the knob.
2. Push the talk switch and say “Store”,
or turn the “AUDIO CTRL” knob until
“Store” is displayed and push the knob.
“Store. Push the talk switch and say con-
firm. Otherwise, say go back.” is heard.
3. Follow voice guidance instructions, or
turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 231.
The system may not function in the follow-
ing cases:
If there is no incoming history.
If the phone book is locked.
INFORMATION
Up to five incoming calls can be
stored in the system.
When five incoming calls are stored
in memory, the oldest incoming call
is deleted to make room in memory
for new calls.
If the cellular phone is not registered, this
system cannot be used. See page 221 for
registering a cellular phone. Make sure
that “BT” is displayed and get the cellular
phone ready to use.
There are 3 ways to make a phone call
with this system.
Speed dial
A phone call can be made with a preset
button in which a phone number is regis-
tered. See page 237 for setting the preset
buttons.
Dial by Name
The system dials the numbers correspond-
ing to the spoken names registered in the
system.
Dial by Number
The system dials to the spoken numbers.
To make a phone call
Push the off−hook switch to turn the
hands−free system on.
—Making a phone call

’07Camry_U (L/O 0608)
241
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
To speed dial
1. Push the preset button where the de-
sired number is set. The name or tele-
phone number is displayed.
2. Push the off−hook switch to dial.
To dial by Name
1. Push the talk switch and say “Dial by
name”.
“Dial by name. Please push the talk
switch and say the stored name, or say
list names.” is heard and “Dial by Name”
is displayed.
2. Push the talk switch and say “XXXX”,
or turn the “AUDIO CTRL” knob until
the phone name that you want to dial
is displayed and push the knob.When using a voice command:
“XXXX Push the off−hook switch to dial.
Otherwise, push the talk switch and say
dial, or go back.” is heard. After that, do
the one of the following:
Push the off−hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CTRL” knob until
“Dial” is displayed and push the knob.
When using the knob:
It calls the number.
The system may not function in the follow-
ing cases:
If there is no number registered in the
preset button.
If the system does not recognize the
voice command.
INFORMATION
The phone numbers registered in
the phone book can be retrieved.
The system does not recognize that
the voice tag is not registered in
the registered cellular phone. For
details about voice tags, see “To
add entry” on page 231.
A shortcut to “Dial by name” is
available. Push the talk switch and
say “Dial XXX (name you want to
dial)”.

’07Camry_U (L/O 0608)
242
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
To dial by Number
1. Push the talk switch and say “Dial by
Number”.
“Dial by number. Please push the talk
switch and say the number.” is heard and
“Dial by Num” is displayed.
2. Push talk switch and say “XXXX”.
“Push the off−hook switch to dial. Other-
wise, push the talk switch and say dial,
go back, or delete.” is heard.
To dial the number, do the one of the
following:
Push the off−hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CTRL” knob until
“Dial” is displayed and push the knob.
If the number exceeds 24 digits, the sys-
tem may not function properly.
INFORMATION
The system can recognize single
digits from zero to nine, #(pound),
∗(star), and +(plus). Numbers that
are ten or greater are not recog-
nized.
To speed up input, it is a good idea
to group all digits into a continuous
string. However, you can enter each
digit individually or group digits to-
gether in preferred string lengths.
The display corresponding to each op-
eration appears on the screen as fol-
lows:
Input operation—
You say: “Nine, nine, five”
Voice output: “995 push the offhook
switch to dial. Otherwise, push the
talk switch and say dial, go back, or
delete.”
Display: “995”
You say: “Seven, three, four”
Voice output: “734 push the offhook
switch to dial. Otherwise, push the
talk switch and say dial, go back, or
delete.”
Display: “995734”
Repeat the above procedure until the
entire number that you want to dial is
input.
Go back operation—
You say: “Go back”
Voice output: “Go back, the last num-
bers entered have been removed.
Push the talk switch and continue
adding numbers otherwise say dial,
go back, or delete.”
Display: “995”
Repeating the above operation deletes
the last digits in reverse order of in-
put.
Delete operation—
You say: “Delete”
Voice output: “Deleted. The entire
number to dial has been deleted.
Please push the talk switch and say
the number.”
Display: “Dial by Num”
The display will return to the initial
screen that allows a number to be
input.