change time TOYOTA HIGHLANDER 2001 Service User Guide

'05 HIGHLANDER_U (L/O 0409)
177
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
Compact disc player
There are two scan featuresÐyou can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
magazine.
Scanning the tracks on a disc:
Quickly push and release the SCANº but-
ton. SCANº will appear on the display
and the player will scan all the tracks on
the disc you are listening to. To stop
scanning, push this button again. If the
player has scanned all the tracks on the
disc, it will stop scanning.
With compact disc changer onlyÐ
Scanning the first tracks of all the discs
in the magazine:
Push the SCANº button until you hear a
beep. 
´SCANº will appear on the dis-
play and the player will scan the first
track of the next disc. To stop scanning,
push this button again. If the player has
scanned all the discs, it will stop scan-
ning.SEEK/TRACK (Seeking/Track up/down)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek the next station, quickly push and
release 
º or º side of the SEEK/
TRACKº button. Do this again to find the
station after that.
Cassette player
Use this button to skip up or down to
locate a song or recording.
You can select up to nine recordings (in-
cluding current one).
A blank space of at least 3 seconds is
considered to be a start of a recording.
When the beginning of a tape is reached,
the player automatically resumes play.
When the end of the tape is reached, the
player automatically reverses sides and
resumes normal play.
In addition, the feature may not work well
with some spoken word, live, or classical
recordings.Compact disc player
Use this button to skip up or down to a
different track.
Push 
º or º side of the SEEK/
TRACKº button until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, quickly push the
down side of the button one time.
Vehicles with rear seat entertainment sys-
temÐ
While the DVD player is in operation, the
chapter or track can be changed by push-
ing the 
º or º side of the SEEK/
TRACKº button.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. STº appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
TA P E
Push the TAPEº button to play a cassette
tape.

'05 HIGHLANDER_U (L/O 0409)
178
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
TEXT
This button is used to change the display
for the compact disc that contains text
data.
To change the display, quickly push and
release the TEXTº button while the com-
pact disc is playing. The display changes
in the order from the elapsed time to disc
title to track title, then back to the
elapsed time.
If this button is pushed while a compact
disc that does not contain text data is
playing, NO TITLEº will appear on the
display.
If the entire disc or track title does not
appear on the display, push and hold the
button until you hear a beep. The rest of
the title will appear.
TUNE (Tuning)
Turn the TUNEº knob clockwise to step
up the frequency. Turn the knob counter-
clockwise to step down the frequency.

'05 HIGHLANDER_U (L/O 0409)
181
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
AUDIO CONTROL (Tone and sound bal-
ance adjustment function)
Each time you push the AUDIO
CONTROLº knob, the mode changes. To
adjust the tone and balance, turn the
knob.
BAS: Adjusts low- pitched tones. The dis-
play ranges from -5 to 5.
MID: Adjusts mid- pitched tones. The dis-
play ranges from -5 to 5.
TRE: Adjusts high- pitched tones. The dis-
play ranges from -5 to 5.
FAD: Adjusts the sound balance between
the front and rear speakers. The display
ranges from F7 to R7.
BAL: Adjusts the sound balance between
the right and left speakers. The display
ranges from L7 to R7.
DISC (Compact disc)
Push the DISCº button to play a compact
disc.
When the audio system is set into com-
pact disc operation, the display shows the
track, or track and disc number currently
being played.Vehicles with rear seat entertainment sys-
temÐ
The DISCº button may also be used to
operate a DVD player when a disc is
loaded in the DVD player. Pressing the
DISCº button changes between the CD
player and DVD player. When the DVD
player is in operation, AUXº appears on
the display.
Error messages
If the player malfunctions, your audio sys-
tem will display one of the six following
error messages.
WAITº: The compact disc player unit
may be too hot. Allow the player to cool
down.
ERROR 1º: The disc may be dirty, dam-
aged or inserted incorrectly (up- side
down). Clean the disc and re- insert it.
NO DISCº: The compact disc changer of
separate unit is empty. Insert a disc.
ERROR 3º: There is a problem inside
the system. Eject the disc or magazine.
Set the disc or magazine again.
ERROR 4º: Over- current. Ask your
Toyota dealer to inspect.
CD OPENº: The compact disc changer
lid of separate unit is open. Close the
compact disc changer lid.If the malfunction still exists, take your
vehicle to your Toyota dealer.
 DISC

Use these buttons to select a disc you
want to listen to.
Push º (preset button 3) or 
º (preset
button 4) until the number of the disc you
want to listen to appears on the display.
Dolby
B NR*
If you are listening to a tape that was
recorded with Dolby B Noise Reduction,
push 
º (preset button 3). º will
appear on the display. Push the button
again to turn off Dolby B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used to re-
cord the tape.
*: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. DOLBYº and the
double D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
FM
Push the FMº button to turn on the radio
and select the FM band. FM1º or FM2º
will appear on the display. This system
allows you to set twelve FM, two for each
of the preset button.

'05 HIGHLANDER_U (L/O 0409)
184
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
Compact disc player
Use this button to skip up or down to a
different track.
Push 
º or º side of the SEEK/
TRACKº button until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, quickly push the
down side of the button one time.
Vehicles with rear seat entertainment sys-
temÐ
While the DVD player is in operation, the
chapter or track can be changed by push-
ing the 
º or º side of the SEEK/
TRACKº button.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. STº appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
TA P E
Push the TAPEº button to play a cassette
tape.TEXT
Radio
This button is operational only in RDS
mode.
When an RDS station transmits a text
message, MSGº will appear on the dis-
played.
To display the text message, first push
the TEXTº button to change the radio
station display. Then push the TEXTº but-
ton once more to display, and the mes-
sage will appear on the display.
If the entire the message is not displayed,

º will appear on the display. To display
the rest of the message, push and hold
the TEXTº button until you hear a beep.
After the entire message has been dis-
played, the message will disappear.
The message display will be canceled if
any button that affects the display is
pushed.
If no messages are received, NO
MESSAGEº will appear on the display, and
the display returns to the previous mode.
The message display will be canceled if
you activate any function that affects the
display.Compact disc player
This button is used to change the display
for the compact disc that contains text
data.
To change the display, quickly push and
release the TEXTº button while the com-
pact disc is playing. The display changes
in the order from the elapsed time to disc
title to track title, then back to the
elapsed time.
If this button is pushed while a compact
disc that does not contain text data is
playing, NO TITLEº will appear on the
display.
If the entire disc or track title does not
appear on the display, push and hold the
button until you hear a beep. The rest of
the title will appear.
TRAF (Traffic)
This button turns the traffic announcement
(TA) feature on and off. This button is
operational only in FM mode.
By pushing the TRAFº button, TRAF
SEEKº will flash on the display and the
radio will seek a traffic program station.
After the traffic announcement program is
over, the display returns to the previous
mode.

'05 HIGHLANDER_U (L/O 0409)
200
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
To turn off the system, push the OFFº
button.
When the front audio system is turned off,
the rear audio system and the DVD player
will be turned off simultaneously.All the modes of the front audio system
can be operated on the rear seat enter-
tainment system.
When the same mode is selected on the
front and rear audio systems simulta-
neously, the system can be operated on
the front audio system.
If the radio mode is selected on the front
and rear audio systems at the same time,
AM and FM modes cannot be changed on
the rear seat audio system.Controller
DVD player unit
ÐFront audio system
operation

'05 HIGHLANDER_U (L/O 0409)
203
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
Cassette tape player
Push the 
º or º side of the DISC/
CH/PROGº button to select the other side
of a cassette tape. The screen indicates
which side is currently selected. (
º indi-
cates the top side, 
º indicates the bot-
tom side.)
Auto- reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
Compact disc player with changer
Use these buttons to select a disc you
want to listen to.
Push the 
º or º side of the DISC/
CH/PROGº button until the number of the
disc you want to listen appears on the
display.2. TUNE/TRACKº button
Radio
Push the 
º or º side of the TUNE/
TRACKº button to tune or seek.
Tuning:
Quickly push and release the 
º or º
side of the TUNE/TRACKº button. Each
time you push the button, the radio will
step up or down to another frequency. If
you push and hold the button, and the
radio will go into the seek mode.
Seeking:
Push and hold the 
º or º side of the
TUNE/TRACKº button. The radio will seek
up or down for a station of the nearest
frequency and will stop on reception. Each
time you push the button, the stations will
be searched one after another.
Cassette tape player
To fast forward a cassette tape, push and
hol d the 
º side of the TUNE/TRACKº
button until FFº appears on the screen.
Push and hold the 
º side of the TUNE/
TRACKº button until REWº appears on
the screen to rewind a tape.
Use this button to skip up or down to
locate a song or recording.You can select up to nine recordings (in-
cluding current one).
Push the 
º or º side of the TUNE/
TRACKº button. FF 1º or REW 1º will
appear on the screen.
Next, push either side of the track button
until the number on the screen reaches
the number of tracks you want to skip. If
you push the button 10 times, the skip
feature will be turned off.
For the skip feature to work correctly a
blank space of at least 3 seconds is con-
sidered to be a start of a recording.
When a beginning of a tape is reached,
the player automatically resumes play.
When the end of the tape is reached, the
player automatically reverses sides and
resumes normal play.
In addition, the feature may not work well
with some spoken, live, or classical re-
cordings.

'05 HIGHLANDER_U (L/O 0409)
212
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
To turn off the switches on the screen,
push the CURSORº button on the control-
ler once again or push the Hide Buttonsº
on the screen.NOTE: The playback condition of some
DVD video discs may be determined by
the DVD video software producer. This
DVD player plays discs as the software
producer intended. Therefore, some
functions may not work properly. Be
sure to read the instruction manual for
the DVD video disc separately provided.
For detailed information about DVD vid-
eo discs, see ÐDVD video disc infor-
mationº on page 236 in this Section.
Precautions for DVD video discs
When recording on a DVD video, DVD
audio, video CD or audio tracks may not
record in some cases while the menu is
displayed. As audio will not play in this
case, verify that the video tracks are play-
ing and then activate playback.
The title/chapter number and playback
time display may not appear while playing
back certain DVD video discs.CAUTION
Conversational speech on some DVDs
is recorded at a low volume to em-
phasize the impact of sound effects.
If you adjust the volume assuming
that the conversations represent the
maximum volume level available for
the DVD, you may be startled by
louder sound effects or when you
change to a different audio source.
Loud sounds may have a significant
impact on the human body or pose a
driving hazard. Keep this in mind
when you adjust the volume.
ÐDVD player operation
(DVD video/DVD audio)

'05 HIGHLANDER_U (L/O 0409)
221
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
DVD video
DVD audio
CHANGING ANGLE SCREEN
Push the Angleº switch on the screen,
and then the changing angle screen will
appear. You can also display the screen
by pushing the ANGLEº button on the
controller.
The angle can be selected for discs that
are multi- angle compatible when the

º mark appears on the screen. Each
time you push the Angleº switch, the
angle changes. The angle number which
you can select will appear on the screen.
Push the Backº switch to return to the
previous screen.

'05 HIGHLANDER_U (L/O 0409)
226
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
Push the number for the password and
the Enterº switch. The Select Restriction
Levelº screen will appear.
If you enter a wrong number, push the
Clearº switch to delete the number.
You cannot change the setting without in-
putting the password. When you forget or
change the password, push the Clearº
switch ten times to initialize the password.
To return to the Setup Menu 1º screen,
push the Backº switch.Push a parental level (1Ð8). The smaller
the level number, the stricter the age limit.
Push the Backº switch to return to the
Setup Menu 1º screen.SETTING THE DISPLAY MODE
Each time you push the Display Modeº
switch on the Setup Menu 2º screen, the
display mode is changed from wide mode
to auto mode.

'05 HIGHLANDER_U (L/O 0409)
241
2005 HIGHLANDER from Nov. '04 Prod. (OM48570U)
For example, nearby buildings and terrain
can interfere with FM reception. Power
lines or telephone wires can interfere with
AM signals. And of course, radio signals
have a limited range. The farther you are
from a station, the weaker its signal will
be. In addition, reception conditions
change constantly as your vehicle moves.
Here are some common reception prob-
lems that probably do not indicate a prob-
lem with your radio:
FM
Fading and drifting stationsÐGenerally, the
effective range of FM is about 40 km (25
miles). Once outside this range, you may
notice fading and drifting, which increase
with the distance from the radio transmit-
ter. They are often accompanied by distor-
tion.
Multi- pathÐFM signals are reflective,
making it possible for two signals to reach
your antenna at the same time. If this
happens, the signals will cancel each oth-
er out, causing a momentary flutter or
loss of reception.Static and flutteringÐThese occur when
signals are blocked by buildings, trees, or
other large objects. Increasing the bass
level may reduce static and fluttering.
Station swappingÐIf the FM signal you
are listening to is interrupted or weak-
ened, and there is another strong station
nearby on the FM band, your radio may
tune in the second station until the origi-
nal signal can be picked up again.
AM
FadingÐAM broadcasts are reflected by
the upper atmosphereÐespecially at night.
These reflected signals can interfere with
those received directly from the radio sta-
tion, causing the radio station to sound
alternately strong and weak.
Station interferenceÐWhen a reflected sig-
nal and a signal received directly from a
radio station are very nearly the same
frequency, they can interfere with each
other, making it difficult to hear the broad-
cast.
StaticÐAM is easily affected by external
sources of electrical noise, such as high
tension power lines, lightening, or electri-
cal motors. This results in static.CARING FOR YOUR CASSETTE PLAYER
AND TAPES
For the best performance for your cas-
sette player and tapes:
Clean the tape head and other parts regu-
larly.
A dirty tape head or tape path can
decrease sound quality and tangle your
cassette tapes. The easiest way to
clean them is by using a cleaning tape.
(A wet type is recommended.)
Use high- quality cassettes.
Low- quality cassette tapes can cause
many problems, including poor sound,
inconsistent playing speed, and
constant auto- reversing. They can also
get stuck or tangled in the cassette
player.
Do not use a cassette if it has been
damaged or tangled or if its label is
peeling off.
Do not leave a cassette in the player
if you are not listening to it, especially
if it is hot outside.
Store cassettes in their cases and out
of direct sunlight.