TOYOTA HILUX 2015 Owners Manual (in English)

491
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
XSingle-cab models
XExtra-cab models
*1: Models for European countries*3
*2: Models only for Finland*3
*3: See “Checking your vehicle’s model” if you are not sure of which modelyour vehicle is. ( →P. 12)
Weights (except for Kazakhstan)
Gross
vehicle mass4WD
models
Left-hand drive
vehicles 2640 kg (5820 lb.)
Right-hand
drive vehicles2730 kg (6019 lb.)
Pre Runner 2640 kg (5820 lb.)
Maximum
permissible
axle capacityFront 1280 kg (2822 lb.)
Rear 1600 kg (3527 lb.)
Drawbar load 115 kg (254 lb.)
To w i n g
capacityWithout brake 750 kg (1653 lb.)
With brake 2800 kg (6173 lb.)
Gross
vehicle mass4WD
models
Left-hand drive
vehicles2620 kg (5776 lb.)*1
2705 kg (5964 lb.)*2
Right-hand
drive vehicles
3010 kg (6636 lb.)
Pre Runner 2590 kg (5710 lb.)
Maximum
permissible
axle capacity
Front 1280 kg (2822 lb.)
Rear
Left-hand drive
vehicles1600 kg (3527 lb.)
Right-hand
drive vehicles1900 kg (4189 lb.)
Drawbar load 115 kg (254 lb.)
To w i n g
capacityWithout brake 750 kg (1653 lb.)
With brake 2800 kg (6173 lb.)
HILUX_OM_OM0K219E_(EE).book Page 491 Wednesday, May 14, 2014
3:06 PM

4928-1. Specifications
HILUX_OM_OM0K219E_(EE)
XDouble-cab models
Gross
vehicle
mass4WD
models
1KD-FTV
engine
Left-hand
drive
vehicles2730 kg (6019 lb.)
Right-hand
drive
vehicles3080 kg (6790 lb.)
2KD-FTV
engine
Left-hand
drive
vehicles2705 kg (5964 lb.)*1
2690 kg (5930 lb.)*2
Right-hand
drive
vehicles
3040 kg (6702 lb.)
Pre Runner 2600 kg (5732 lb.)
Maximum
permissible
axle
capacity
1KD-FTV
engine
Left-hand
drive
vehiclesFront 1340 kg (2954 lb.)
Rear 1600 kg (3527 lb.)
Right-hand
drive
vehiclesFront 1340 kg (2954 lb.)
Rear 1900 kg (4189 lb.)
2KD-FTV
engine
Left-hand
drive
vehiclesFront 1280 kg (2822 lb.)
Rear 1600 kg (3527 lb.)
Right-hand
drive
vehiclesFront 1280 kg (2822 lb.)
Rear 1900 kg (4189 lb.)
Drawbar load
80 kg (176 lb.)*1
115 kg (254 lb.)*2
To w i n g
capacity
Without brake 750 kg (1653 lb.)
With brake1500 kg (3307 lb.)
*1
2790 kg (6151 lb.)*3
2800 kg (6173 lb.)*4
HILUX_OM_OM0K219E_(EE).book Page 492 Wednesday, May 14, 2014
3:06 PM

493
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
*1: For KUN25L-PRMDH model*5
*2: Except for KUN25L-PRMDH model*5
*3: For KUN26L-PRMDYW and KUN26L-PRADYW models*5
*4: Except for KUN25L-PRMDH, KUN26L-PRMDYW and
KUN26L-PRADYW models
*5
*5: The model code is indicated on the manufacturer’s label or plate. (→ P. 494)
HILUX_OM_OM0K219E_(EE).book Page 493 Wednesday, May 14, 2014 3:06 PM

4948-1. Specifications
HILUX_OM_OM0K219E_(EE)■
Vehicle identification number
The vehicle identification number (VIN) is the legal identifier for
your vehicle. This is the primary identification number for your
Toyota. It is used in registering the ownership of your vehicle.
This number is stamped on the
rear right frame.
Models made in South Africa
*:
This number is also on the
manufacturer’s label.
Vehicle identification
HILUX_OM_OM0K219E_(EE).book Page 494 Wednesday, May 14, 2014 3:06 PM

495
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
Models made in Thailand*:
This number is also on the
manufacturer’s plate.
*: See “Checking your vehicle’s model” if you are not sure of which model your vehicle is. ( →P. 12)
■
Engine number
The engine number is stamped on the engine block as shown.
XGasoline engineXDiesel engine
HILUX_OM_OM0K219E_(EE).book Page 495 Wednesday, May 14, 2014 3:06 PM

4968-1. Specifications
HILUX_OM_OM0K219E_(EE)
X2TR-FE engine
X1KD-FTV engine
X2KD-FTV engine
Engine
Model2TR-FE
Ty p e4 cylinder in line, 4 cycle, gasoline
Bore and stroke95.0 × 95.0 mm (3.74 × 3.74 in.)
Displacement2694 cm3 (164.4 cu.in.)
Valve clearance
(engine cold)Automatic adjustment
Drive belt tensionAutomatic adjustment
Model1KD-FTV
Ty p e4 cylinder in line, 4 cycle, diesel
(with turbocharger)
Bore and stroke96.0 × 103.0 mm (3.78 × 4.06 in.)
Displacement2982 cm3 (182.0 cu.in.)
Valve clearance
(engine cold)Intake: 0.20  0.30 mm (0.008  0.012 in.)
Exhaust: 0.35  0.45 mm (0.014  0.018 in.)
Drive belt tensionAutomatic adjustment
Model2KD-FTV
Ty p e4 cylinder in line, 4 cycle, diesel
(with turbocharger)
Bore and stroke92.0 × 93.8 mm (3.62 × 3.69 in.)
Displacement2494 cm3 (152.2 cu.in.)
Valve clearance
(engine cold)Intake: 0.20  0.30 mm (0.008  0.012 in.)
Exhaust: 0.35  0.45 mm (0.014  0.018 in.)
Drive belt tensionAutomatic adjustment
HILUX_OM_OM0K219E_(EE).book Page 496 Wednesday, May 14, 2014 3:06 PM

497
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
XGasoline engine
XDiesel engine
*: The model code is indicated on the manufacturer’s label or plate. (→ P. 494)
Fuel
Fuel type Unleaded gasoline only
Research Octane
Number 91 or higher
Fuel tank capacity
(Reference)76 L (20.1 gal., 16.7 Imp.gal.)
Fuel type
XEU area
Diesel fuel conforming to European standard
EN590
XExcept EU area (except Russia and KUN25L-
PRMDH models
*)
Diesel fuel that contains 50 ppm or less of sulfur
XExcept EU area (Russia)
Diesel fuel confirming to GOST R52368-2005
(Sulfur max 50 ppm).
XExcept EU area (KUN25L-PRMDH model* for
Kazakhstan)
Diesel fuel that contains 500 ppm or less of sulfur
XExcept EU area (KUN25L-PRMDH model*
except for Kazakhstan)
Diesel fuel only
Cetane number 48 or higher
Fuel tank capacity
(Reference)
XExcept for KUN25L-PRMDH model*
80 L (21.1 gal., 17.6 Imp.gal.)
XFor KUN25L-PRMDH model*
76 L (20.1 gal., 16.7 Imp.gal.)
HILUX_OM_OM0K219E_(EE).book Page 497 Wednesday, May 14, 2014 3:06 PM

4988-1. Specifications
HILUX_OM_OM0K219E_(EE)
XGasoline engine
*: The engine oil capacity is a reference quantity to be used when changingthe engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity (SAE):
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 0W-20, 5W-20
or 5W-30 engine oil is recom-
mended.
Lubrication system
Oil capacity
(Drain and refill  Reference
*)
With filter
Without filter5.6 L (5.9 qt., 4.9 Imp.qt.)
5.3 L (5.6 qt., 4.7 Imp.qt.)
Temperature range anticipated
before next oil change
HILUX_OM_OM0K219E_(EE).book Page 498 Wednesday, May 14, 2014 3:06 PM

499
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
Oil viscosity (0W-20 is explained here as an example):• The 0W in 0W-20 indicates the characteristic of the oil which
allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is
operated at high speeds, or under extreme load conditions.
How to read oil container labels:
Either or both API registered marks are added to some oil contain-
ers to help you select the oil you should use. API Service Symbol
Top portion: “API SERVICE SN”
means the oil quality designa-
tion by American Petroleum
Institute (API).
Center portion: “SAE 0W-20”
means the SAE viscosity grade.
Lower portion: “Resource-con-
serving” means that the oil has
fuel-saving and environmental
protection capabilities.
ILSAC Certification Mark
The International Lubricant Specification Advisory Committee (ILSAC)
Certification Mark is displayed on the front of the container.
1
2
HILUX_OM_OM0K219E_(EE).book Page 499 Wednesday, May 14, 2014 3:06 PM

5008-1. Specifications
HILUX_OM_OM0K219E_(EE)
XDiesel engine (except for Russia, Ukraine and KUN25L-PRMDH
models
*1)
*1: The model code is indicated on the manufacturer’s label or plate. (→ P. 494)
*2: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota
recommends the use of approved “Toyota Genuine Motor Oil”.
Another motor oil of matching quality can also be used.
Oil grade: ACEA C2
Oil capacity
(Drain and refill 
reference
*2)
With filter
Without filter 6.9 L (7.3 qt., 6.1 Imp.qt.)
6.6 L (7.0 qt., 5.8 Imp.qt.)
NOTICE
Using engine oil other than ACEA C2 may damage the catalytic converter.
HILUX_OM_OM0K219E_(EE).book Page 500 Wednesday, May 14, 2014
3:06 PM