TOYOTA LAND CRUISER 1996 J80 Workshop Manual
Page 321 of 1399
BO39C−01
−
BODY SIDE STEP
BO−81
1315
Author: Date:
1996 LAND CRUISER (RM451U)
SIDE STEP
COMPONENTS
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 322 of 1399
BO39E−01
BO−82
−
BODY FRONT SEAT (Power Adjuster Type)
1316
Author: Date:
1996 LAND CRUISER (RM451U)
FRONT SEAT (Power Adjuster Type)
COMPONENTS
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 323 of 1399
−
BODY FRONT SEAT (Power Adjuster Type)
BO−83
1317
Author: Date:
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 324 of 1399
BO48R−01
BO−84
−
BODY FRONT SEAT (Power Adjuster Type)
1996 LAND CRUISER (RM451U)
DISASSEMBLY
1. REMOVE FRONT SEAT HEADREST
2. REMOVE SIDE SUPPORT ADJUSTER KNOB
Using a screwdriver, remove the snap ring and side support ad-
juster knob.
3. REMOVE SEATBACK BOARD
(a) Remove the 2 screws.
(b) Slide the board downward to remove it.
4. REMOVE FRONT SEATBACK ASSEMBLY
(a) Using a hog ring pliers, remove the hog ring backward of seatback.
(b) Remove the 4 bolts and front seatback assembly. Torque: 30 N·m (300 kgf·cm, 22 ft·lbf)
5. REMOVE FRONT SEAT CUSHION INNER SHIELD
6. REMOVE FRONT SEAT INNER BELT
7. REMOVE FRONT SEAT CUSHION SHIELD
8. REMOVE FRONT SEAT CUSHION
(a) Remove the 4 bolts.
Torque: 30 N·m (300 kgf·cm, 22 ft·lbf)
(b) Disconnect the connector, then remove the front seat cushion.
9. REMOVE SEAT CUSHION REAR PROTECTOR
10. REMOVE RECLINING ADJUSTER INSIDE COVER
Remove the 4 screws and reclining adjuster inside cover LH
and RH.
11. REMOVE POWER ADJUST FRONT SHIELD
Remove the 2 screws and front shield.
12. REMOVE SLIDE MOTOR
(a) Using the 5.0 mm (0.20 in.) hexagon wrench, remove the
4 housing bracket screws.
Torque: 10 N·m (100 kgf·cm, 7.0 ft·lbf)
(b) Hold the front seat horizontal jack screw with a plier, and remove the 2 nuts and 2 washers.
Torque: 2.0 N·m (20 kgf·cm, 17 in.·lbf)
HINT:
At the time of installation, apply adhesive to nut. Part No. 08833 − 00070, THREE BOND 1324 or equiva-
lent
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 325 of 1399
−
BODY FRONT SEAT (Power Adjuster Type)
BO−85
1996 LAND CRUISER (RM451U)
(c) Remove the 4 screws and 2 vertical adjuster bushes.
(d) Remove the 4 bolts, slide motor, front seat slide housing
and front seat horizontal jack screw.
Torque: 19 N·m (200 kgf·cm, 14 ft·lbf)
(e) Loosen the seat adjuster nut, then remove the slide mo- tor.
13. REMOVE REAR VERTICAL MOTOR
(a) Remove the 2 E −rings, and disconnect the No. 1 vertical
seat link.
(b) Remove the 4 bolts, vertical rod hold bracket RH and ver-
tical rod hold bracket LH.
Torque: 20 N·m (210 kgf·cm, 15 ft·lbf)
(c) Using the 5.0 mm (0.20 in.) hexagon wrench, remove the
2 housing support bracket screws.
Torque: 10 N·m (100 kgf·cm, 7.0 ft·lbf)
(d) Hold the No. 2 vertical travel jack screw with a plier, re- move the nut and washer.
Torque: 2.0 N·m (20 kgf·cm, 17 in.·lbf)
HINT:
At the time of reassembly, apply adhesive to nut.
Part No. 08833− 00070, THREE BOND 1324 or equiva-
lent
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 326 of 1399
BO−86
−
BODY FRONT SEAT (Power Adjuster Type)
1996 LAND CRUISER (RM451U)
(e) Remove the 2 screws, vertical adjuster bush, rear vertical
motor and No. 2 vertical seat link.
14. REMOVE FRONT VERTICAL MOTOR
(a) Using the 5.0 mm (0.20 in.) hexagon wrench, and remove
the 2 housing support bracket screws.
Torque: 10 N·m (100 kgf·cm, 7.0 ft·lbf)
(b) Hold the No. 1 vertical travel jack screw with a plier, re- move the nut and washer.
HINT:
At the time of reassembly, apply adhesive to nut. Part No. 08833− 00070, THREE BOND 1324 or equiva-
lent
Torque: 2.0 N·m (20 kgf·cm, 15 ft·lbf)
(c) Remove the 2 screws, vertical adjuster bush, front vertical
motor and No. 1 vertical seat link.
15. REMOVE FRONT SEAT TRACK
(a) Remove the 2 bolts and front seat motor side housing. Torque: 20 N·m (210 kgf·cm, 15 ft·lbf)
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 327 of 1399
−
BODY FRONT SEAT (Power Adjuster Type)
BO−87
1996 LAND CRUISER (RM451U)
(b) Remove the 2 bolts, seat track inner reinforcement, then
separate the seat track RH and LH.
Torque: 20 N·m (210 kgf·cm, 15 ft·lbf)
(c) Remove the reclining connecting rod.
16. REMOVE SEAT WIRE
17. REMOVE RECLINING MOTOR
18. REMOVE RECLINING HINGE COVER
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 328 of 1399
BO39H−01
BO−88
−
BODY FRONT SEAT (Power Adjuster Type)
1996 LAND CRUISER (RM451U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page BO−84 ).
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 329 of 1399
BO39D−01
−
BODY FRONT SEAT (Manual Adjuster T ype)
BO−89
1323
Author: Date:
1996 LAND CRUISER (RM451U)
FRONT SEAT (Manual Adjuster Type)
COMPONENTS
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010
Page 330 of 1399
BO39J−01
BO−90
−
BODY REAR NO.1 SEAT
1324
Author: Date:
1996 LAND CRUISER (RM451U)
REAR NO.1 SEAT
COMPONENTS
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.11 - 03/16/2010