audio TOYOTA LAND CRUISER 2008 J200 User Guide

262 3−2. Using the audio system
RDS (Radio Data System)
This feature allows your radio to receive station identification informa−
tion and program information (classic
al, jazz, etc.) from radio stations
which broadcast this information.
n
Receiving RDS broadcasts
Press “ ” or “” on the during FM reception.
The type of program changes each time the button is pressed.
lROCK
l
EASYLIS (Easy listening)
lCLS/JAZZ (Classical music and Jazz)
l
R & B (Rhythm and Blues)
l
INFORM (Information)
lRELIGION
l
MISC (Miscellaneous)
l
ALERT (Emergency messages)
If the system receives no RDS stations, “NO PTY” appears on the display.
Press , or “ ” or “ ” on .
The radio seeks scans the station by the relevant program type.
If no radio station of that type is found, “NOTHING” appears on the
display.
nDisplaying radio station names
Press .
STEP1
STEP 2

263
3−2. Using the audio system
3
Interior features
nDisplaying radio text messages
Press .
If MSG is shown on the display, a text message will be displayed.
If the text continues past the end of the display, is displayed. Press
and hold until you hear a beep.
nTraffic announcement
Press .
“TRAF SEEK” appears on the display, and the radio will start seeking
any station broadcasting traffic program information.
If no traffic program station is found, “NO TRAF INFO” appears on the
display.
nWhen the battery is disconnected
All preset stations are erased.
nReception sensitivity
lMaintaining perfect radio reception at all times is difficult due to the con−
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
l
The radio antenna is mounted inside the rear quarter window. To main−
tain clear radio reception, do not attach metallic window tinting or other
metallic objects to the antenna wire mounted inside the rear quarter win−
dow.

264 3−2. Using the audio system
nCertifications for the radio tuner
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How−
ever, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by trying one or more of
the following:
lReorienting or relocating the receiving antenna.
lIncreasing the separation between the equipment and receiver.
lConnecting the equipment into an outlet on a circuit different from that to
which the receiver is connected.
lConsulting the dealer or an experienced radio/TV technician for help.

265
3−2. Using the audio system
3
Interior features
Using the CD player
Insert a CD or press with a CD inserted.
LOAD
TYPEDISCSEEKTRACK
AMSATFMDISCAUXTRAF
12 3 4 56
TUNEFILE
PUSHAUDIO CONTROL
PWRVOL
TEXTSCAN
RAND RPT
1234 56DISCASLSCAN ADS FLD FILETR TRAFST MSGART
FORDER
PWRVOLSCANPWRVOLSCAN
ITY32C005
Search playback
CD eject
Random playbackRepeat play CD slot
CD insert
Display text message
CD selection Playback
Selecting a track,
fast forwarding
or reversing
Power Volume

266 3−2. Using the audio system
Loading a CDs
nLoading a single CD
Press .
“WAIT” appears on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
nLoading multiple CDs
Press and hold until you hear a beep.
“WAIT” appears on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the CD is inserted.
Insert the next CD when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining CDs.
To cancel the operation, press or . If you do not
insert a CD within 15 seconds, loading will be canceled automati−
cally.
STEP1
STEP 2
STEP 1
STEP 2
STEP 3

267
3−2. Using the audio system
3
Interior features
Ejecting CDs
nEjecting a CD
To select the CD to be ejected, press “ ” or “ ” on
.
The number of the CD selected is shown on the display.
Press and remove the CD.
nEjecting all CDs
Press and hold until you hear a beep, then remove the
CDs.
Selecting a CD
nTo select a CD to play
Press “
” or “” on until the desired CD number
appears on the display.
nTo scan loaded CDs
Press and hold until you hear a beep.
The first 10 seconds of the first track on each CD will be played.
Press once again when the desired CD is
reached.
Selecting a track
Press “ ” to move up or “ ” to move down using
until the desired track number appears on the display.
STEP1
STEP 2
STEP 1
STEP 2

268 3−2. Using the audio system
Fast forwarding and rewinding tracks
Press and hold “ ” or “
” on .
Scanning a CD
Press .
“SCAN” appears on the display.
The first 10 seconds of each track will be played.
Press once again when the desired track is
reached.
Random playback
nCurrent CD
Touch (RAND).
Tracks are played in random order until the button is pressed once
again.
nAll CDs
Press and hold (RAND) until you hear a beep.
Tracks on all loaded CDs are played in random order until the button is
pressed once again.
Repeating a track or a disc
nRepeating a track
Press (RPT).
n
Repeating a disc
Press and hold (RPT) until you hear a beep.
STEP1
STEP 2

269
3−2. Using the audio system
3
Interior features
Switching the display
Press .
Each time the button is pressed, the display changes in the order of Track
no./Elapsed time
CD title
Track name.

270 3−2. Using the audio system
nDisplay
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1
second or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed
for 6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
nCanceling random, repeat and scan playback
Press
(RAND),
(RPT) or again.
nError messages
“ERROR”: This indicates a trouble either in the CD or inside the player.
The CD may be dirty, damaged or inserted up−side down.
nDiscs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea−
tures, or due to scratches, dirt or deterioration.
CDs with copy−protect features may not play correctly.
nCD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
n
If CDs are left inside the CD pla yer or in the ejected position for
extended periods
CDs may be damaged and may not play properly.
n
Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.

271
3−2. Using the audio system
3
Interior features
NOTICE
nCDs and adapters that cannot be used
Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual
Disc.
Doing so may damage the player and/or the CD insert/eject function.
lCDs that have a diameter that is not 4.7
in. (12 cm).
lLow−quality and deformed CDs.
lCDs with a transparent or translucent
recording area.
l
CDs that have tape, stickers or CD−R
labels attached to them, or that have
the label peeled off.