TOYOTA PROACE VERSO 2020 Owners Manual

121
Folding and sliding table
Storage
For correct sliding of the table, ensure that there is no object in the space used by the runner on the floor.Before manoeuvring the table, check that there is nothing on the table.
The storage space can accept a maximum weight of 3 kg; do not exceed
this maximum load in use.
You can move the table folded or unfolded. However, for greater safety, it is recommended that the assembly be moved in the folded position.
It comprises a central storage space closed with a lid. Unfolded, it offers a table with two tops on which objects can be placed. The central area includes two cup holders and can also be used to place small objects (credit card, pen, ...).The assembly is mounted on a runner allowing it
to be positioned equally well in row 2 or row 3.
F Slide back the cover for access to 11 litres of storage space.
Moving forward or backward
F Raise this control (without going beyond the point of resistance) and slide the assembly for ward or backward.F Release the control when it is in the desired position.F Check that the table is correctly latched on the runner. If this is not the case, move the assembly slightly to the next notch on the r u n n e r.
3
Ease of use and comfort

122
Unfolding
F Pull each table top fully up then pivot them on each side into the horizontal position.
F Raise each table top, going beyond the point of resistance, to the vertical position.F Push each table top down into its housing until it clicks into place.F Push the control then tip the table assembly downward until it clicks into place.
Folding
Before stowing the table tops, check that there is no object underneath. Before tipping the assembly down, check that the two table tops have clicked home in the low position and that there is nothing in the cup holder
area (such as a can or pen).
F Operate the control on the top and pull the table assembly up until it clicks into place.
Cup holders
Liquids carried in an open vessel (a cup or mug) could be spilt, presenting a risk. Take care.Never use the table in this position while the vehicle is being driven.
Two cups or cans and small objects (such as a credit card, portable ashtray or pen) can be carried in the middle of the unfolded table.
Ease of use and comfort

123
F Raise the control fully to release the anchorages and tip the table assembly forward.F Remove the table assembly through the sliding door in row 2.
RemovingChanging the direction
With the table removed, you can turn it 180°.
F Check that there is no object obstructing the runner, which could prevent correct latching.
Refitting
Remove a seat to make this easier.Check that there is nothing in the space around the runner on the floor, so that
the table disengages cleanly.
F Check that the control is in the up position (latching mechanism armed). If not, raise this control fully to arm the mechanism.F Place the front of the table on the runner.F Taking care not to inter fere with the control, tip the assembly down at the rear until it clicks into place.F Check that the assembly is correctly latched on the runner. if this is not the case, slide the assembly along the runner to the next notch.F Release the control until the guide latches in the runner.
3
Ease of use and comfort

124
Take care of passengers' feet when manoeuvring the assembly.
Incorrect use of the table could cause serious injury.Never use the table open or unfolded while the vehicle is being driven. An object on the table is turned into a projectile under heavy braking.Ensure that the table is correctly stowed in the low position before moving off.Never use the table tops as seats or lean on them.A label on the table is a reminder of this.
Never place hot objects such as casseroles or cooking pans on the table, you risk damaging its sur face (risk of fire).
With the table deployed, each top can support a maximum of 10 kg. Failure to obser ve this maximum load introduces the risk of damaging all or part of the table module.Never raise the table when it is between captain seats; this risks damaging the table tops.
Storage off the runner
If removing and storing the table out of the vehicle, ensure that it is placed in a clean area, so as to avoid introducing any foreign bodies into the mechanisms.The table assembly must be placed on a flat and level sur face when out of the vehicle, resting on the guide so as to avoid damaging the visible parts.
Caution, when out of the vehicle, the table leans to the right or left when put down.
Ease of use and comfort

125
The air conditioning system only operates with the engine running.
Manual air conditioning
Temperature
F Turn the knob from "LO" (cold) to "HI" (hot) to adjust the temperature to your requirements.
Air flow
F Turn the knob to obtain a comfortable air flow.
If you put the air flow control in the minimum position (system off), the temperature is no longer controlled. However, a slight flow of air can still be felt, resulting from the movement of the vehicle.
Air distribution
Windscreen and side windows.
Footwells.
Central and side vents.
The air distribution can be adapted by adding the corresponding buttons.
Air intake / Air recirculation
The intake of exterior air avoids misting of the windscreen and side windows.The recirculation of interior air insulates the passenger compartment from exterior odours and fumes.
Return to exterior air intake as soon as possible to avoid deterioration of the air quality and the formation of mist.
This allows hot or cold air to be delivered quickly when required.
F Press this button to recirculate the interior air; its indicator lamp comes on.
F Press this button again to allow exterior air into the passenger compartment; its indicator lamp goes off.
3
Ease of use and comfort

126
Air conditioning
Switching on
With the engine running, the air conditioning is designed to operate effectively in all seasons, with the windows closed.It enables you to:- lower the temperature, in summer,- increase the effectiveness of the demisting in winter, above 3°C.
To obtain cool air more quickly, you can use interior air recirculation for a few moments. Then return to the intake of exterior air.
F Press this button; its indicator lamp comes on.
F Press this button again; its indicator lamp goes off.
Switching off
The air conditioning does not operate when the air flow adjustment is set to of f.
Switching off may result in some discomfort (humidity, misting).
Ease of use and comfort

127
A setting around 21 enables you to obtain an optimum level of comfort. Depending on your requirements, a setting between 18 and 24 is usual.In addition, it is recommended that you avoid a left /right setting difference of more than 3.
Dual-zone automatic air conditioning
Offers the best compromise between
a comfortable temperature and quiet operation.
Provides soft and quiet operation by limiting air flow.
Provides strong and effective air flow.
F Press the "AUTO" button repeatedly.
Automatic comfort mode
Temperature
F Push the button down to reduce the value or up to
increase it.When the engine is cold, the air flow will only reach its optimum level gradually to prevent too great a distribution of c o l d a i r.In cold weather, it favours the distribution of warm air to the windscreen, the side windows and the footwells only.
The active mode appears in the display screen, as described below:
If desired, you can choose settings different to those offered by the system, by adjusting a setting manually. The other functions are still managed automatically.The "AUTO" symbol disappears if you modify a setting.
Manual mode
The driver and front passenger can each set the temperature to suit their requirements.The value indicated in the screen corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit.
3
Ease of use and comfort

128
Visibility programme
F Press the "visibility" button for faster demisting or defrosting of the windscreen and side windows.
F Press the "visibility" button again to stop the programme.
The system automatically manages the air conditioning, air flow and air intake and distributes the flow of air to the windscreen and side windows to the best effect.
For maximum cooling or heating of the passenger compartment, you can exceed the minimum value of 14 or the maximum value of 28.
F Push the button down until "LO" is displayed or up until "HI" is displayed.
On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to alter the value displayed in order to obtain the required level of comfort. The system corrects the temperature difference automatically and as quickly as possible.
"Mono" function
The comfort setting for the passenger side can be indexed to the driver's comfort setting (mono-zone).
The function is deactivated automatically if a passenger uses the temperature control.
Or
F Press the "AUTO" button to return to the automatic comfort programme.
F Press this button to activate / deactivate the "Mono" function.The indicator lamp in the button is on when the function is activated.
Ease of use and comfort

129
F Press this button to increase air f low.
Air distribution
F Press this button repeatedly to direct the air flow in turn to:
- the windscreen, the side windows and the footwells,- the footwells.- the central vents, the side vents and the footwells,- the windscreen, the side windows, the centre vents and the footwells,- the centre and side vents,- the windscreen and side windows (demisting or defrosting),
Air flow
F Press this button to decrease air f low.
The air flow symbol (a fan) appears. It is filled in or emptied progressively according to the setting.
Air conditioning
It enables you to:- lower the temperature, in summer,- increase the effectiveness of the demisting in winter, above 3°C.
Switching on
With the engine running, the air conditioning is designed to operate effectively in all seasons, with the windows closed.
The air conditioning does not operate when the air flow adjustment is set to of f.
To obtain cool air more quickly, you can use interior air recirculation for a few moments. Then return to the intake of exterior air.
F Press this button; its indicator lamp comes on.
F Press this button again; its indicator lamp goes off.
Switching off
Switching off may result in some discomfort (humidity, misting).
3
Ease of use and comfort

130
Switching the system off
F Press this button until the fan symbol disappears.
This action switches off all of the functions of the system.The temperature is no longer controlled. A slight flow of air, resulting from the movement of the vehicle, remains perceptible however.
Avoid driving for too long with the system switched off (risk of misting and of deterioration of the air quality).
Air intake / Air recirculation
The intake of exterior air avoids misting of the windscreen and side windows.The recirculation of interior air insulates the passenger compartment from exterior odours and smoke.
Return to exterior air intake as soon as possible to avoid deterioration of the air quality and the formation of mist.
This allows hot or cold air to be delivered quickly when required.
F Press this button to recirculate the interior air; the symbol appears.
F Press this button again to allow exterior air into the passenger compartment; the symbol disappears.
F Press this button to switch the system on again.
Ease of use and comfort