TOYOTA SIENNA 2007 XL20 / 2.G Navigation Manual

121 (iv) Setting the screen
1. Touch “Screen” to display the “Screen
Settings” screen.
2. Do the detail settings of the screen and
touch “OK”.
Receiving Call Display
You can select the method of the receiving
call display.
Touch “Full” or “Icon”.
Full mode When a call is received, the . . . . .
Hands−free screen is
displayed and you can
operate it on the screen.
Icon mode The message is displayed. . . . .
on the upper side of the
screen. You can only
operate the steering
switch.
Auto answer
When a call is received, the display auto-
matically changes to the talking screen
and you can start to talk on the phone
(without touching any switch) after the
preset time.
Touch “ON” of “Auto Answer” and “” or
“+” to adjust the waiting time of auto an-
swer within 1 60 seconds.

122
The Bluetooth connection status at
startup
When the ignition switch is set at ACC or
ON and the Bluetooth is automatically
connected, the connection check is dis-
played.
Touch “ON” or “OFF” of “Show Bluetooth∗
connection status at start up”.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “Yes”.(v) Setting the phone book
You can register phone numbers in the
phone book.
Touch “Phone Book” to display the
“Phone Book Management” screen.
You can do the detail settings of phone
book.

123
Transferring a telephone number
You can transfer the telephone numbers in
your Bluetooth phone to the system. Up
to 1000 person’s data (up to 2 numbers a
person) can be registered in the phone
book.
Transfer it while the engine is running.
1. Touch “Transfer Data” to display “Se-
lect Group” screen.
2. Select the group you want to transfer
to.
3. Touch “Overwrite” or “Add TO”.
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel”. If the transferring
is interrupted on the way, the phone book data
transferred until then can be memorized in the
system.
5. When this screen is displayed, the
transfer is completed.

124
When this screen is displayed, try the
transfer operation again.
Registering the phone book data
You can register the phone book data.
1. Touch “Register” of “Phone Book”.
2. Touch the desired touchscreen but-
ton to edit the phone book.
3. When you complete the edit, touch
“OK”.

125
Editing the name
When you don’t input the name, the num-
ber is displayed.
1. Touch “Name”.
2. Use the software keyboard to input the
name.
Editing the phone number
You can register the phone number in
“TEL1” and “TEL 2” separately. Up to 2
numbers a person can be registered.
1. Touch “TEL 1” or “TEL 2”.
2. Input the number and touch “OK”.
3. Select the desired icon.

126
Selecting the group
You can set a group for a contact (for ex-
ample: “Family”, “Friends”, “Office”...). It
will then be easier for you to find this con-
tact when needed, by using the group dis-
play.
You can select “No group” or “Group 01”
to “Group 19”.
“No group” is displayed if you don’t set the
group.
1. Touch “Group”.
2. Select the desired group.
Setting the voice recognition
You can set the voice recognition. Up to 20
numbers can be registered for the voice
recognition.
1. Touch “Voice Rec.”.
2. Select the phone number and touch
“REC” to record a voicetag.

127
3. Touch “PLAY” to play the voicetag.
If you want to delete it, touch “Delete” and
“OK”.
Adding the data to the phone book
You can add data to the phone book.
1. Touch “Add to”.
2. Select the data you want to add log data
to.
3. Confirm the added data on the screen
and touch “OK”.

128
Editing the data
You can edit the registered data.
1. Touch “Edit”.
2. Select the data you want to edit.
3. Touch the desired touchscreen but-
ton.
When you edit the data, touch “OK”.
When you also touch “Edit” on this
screen, you can edit it.
Deleting the data
You can delete the data.
When you release your car, delete all your
data on the system.
1. Touch “Delete” of “Phone Book”.
2. Touch the desired touchscreen but-
ton.

129
3. Touch “Yes”.
You can also delete it in the following way.
1. Touch “Phone Book”.
2. Select the desired data.
3. Touch “Delete”.
4. Touch “Yes”.

130
Deleting all the phone data
1. Touch “Delete All” of “Phone Book”.
2. Select the deleting method.
Group Data Deleting all the phone. . . . . . . .
data in group.
All Contact Data Deleting all the phone. . .
data.3. When you select “Group Data”, the
“Select Group” screen is displayed.
4. Select the desired group.
5. Touch “Yes”.You can also delete it in the following way.
1. Touch “Phone Book”.
2. Touch “Delete All”.