ESP TOYOTA TACOMA 2019 Accessories, Audio & Navigation (in English)
Page 141 of 294
141
VOICE COMMAND SYSTEM
4
2. MOBILE ASSISTANT OPERATION
1. MOBILE ASSISTANT
1Press  and  hold  this  switch  until  you
hear the beeps.
2The Mobile Assistant can be used only
when the following screen is displayed.
To  cancel  the  Mobile  Assistant:  Select
“Cancel”,  press  the    on  the  steering
wheel,  or  press  and  hold  the    on  the
steering wheel.
 To  restart  the  Mobile  Assistant  for  addi-
tional  commands,  press  the    on  the
steering wheel.
• Mobile  Assistant  can  only  be  restarted
after  the  system  responds  to  a  voice
command. • After  some  phone  and  music  com-
mands,  the  Mobile Assistant  feature  will
automatically  end  to  complete  the
requested action.
The  Mobile  Assistant  feature  will
activate Apple’s Siri
® Eyes Free mode
via  the  steering  wheel  switches.  To
operate  the  Mobile  Assistant,  a
compatible  cellular  phone  must  be
registered  and  connected  to  this
system via Bluetooth
®. ( P.43)
 The  volume  of  the  Mobile Assistant  can
be  adjusted  using  the  “PWR/VOL”
knob  or  steering  wheel  volume  control
switches.  The  Mobile  Assistant  and
phone call volumes are synchronized.
INFORMATION
● The  available  features  and  functions
may  vary  based  on  the  iOS  version
installed on the connected device.
● Some  Siri  features  are  limited  in  Eyes
Free  mode.  If  you  attempt  to  use  an
unavailable  function,  Siri  will  inform  you
that the function is not available.
● If  Siri  is  not  enabled  on  the  cellular
phone  connected  via  Bluetooth
®,  an
error  message  will  be  displayed  on  the
screen.
● While  a  phone  call  is  active,  the  Mobile
Assistant cannot be used.
● If using the navigation feature of the cel-
lular  phone,  ensure  the  active  audio
source  is  Bluetooth
®  audio  or  iPod  in
order  to  hear  turn  by  turn  direction
prompts. 
Page 176 of 294
176
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
1Display  the  message  inbox  screen.
(P.173)
2Select  the  desired  message  from  the
list.
3Select “Quick Message” .
4Select the desired message.
5Select “Send” .
While  the  message  is  being  sent,  a  send-
ing message screen is displayed. 
 To  cancel  sending  the  message,  select
“Cancel” .
■EDITING  QUICK  REPLY  MESSAG-
ES
1Select “Quick Message” .
2Select    corresponding  to  the  de-
sired message to edit.
3Select “OK”  when  editing  is  complet-
ed.
REPLYING TO A MESSAGE 
(QUICK REPLY)
15  messages  have  already  been
stored.This  operation  cannot  be  performed
while driving.
INFORMATION
● To  reset  the  edited  quick  reply
messages, select  “Default”.
 Entune Premium Audio
● “Quick Message 1” (“I am driving and
will  arrive  in  approximately  [ETA]
minutes.”) :
This  message  cannot  be  edited  and  will
automatically  fill  in  [ETA]  with  the
navigation  calculated  estimated  time  of
arrival on the confirm message screen.
If  there  are  waypoints  set,  [ETA]  to  the
next waypoint will be shown.
If  there  is  no  route  currently  set  in  the
navigation  system,  “Quick  Message  1”
cannot be selected. 
Page 183 of 294
183
2. SETUP
PHONE
7
■R E G I S T E R I N G  A  N E W  C O N T A C T  I N
A  DIFFERENT  WAY  (FROM  THE
“Call History” SCREEN)
1Display  the  phone  top  screen.
(P.162)
2Select  the “Call  History”   tab  and  se-
lect  a  contact  not  yet  registered  in  the
contact list.
3Select  “Add to Contacts” . 
4Follow  the  steps  in  “REGISTERING  A
NEW  CONTACT  TO  THE  CONTACT
LIST” from “STEP 2”. ( P.182)
1Select “Edit Contacts” .
2Select the desired contact.
3Select    corresponding  to  the  de-
sired name or number.
 For editing the name
4Follow  the  steps  in  “REGISTERING  A
NEW  CONTACT  TO  THE  CONTACT
LIST” from “STEP 2”. ( P.182)
 For editing the number
4Follow  the  steps  in  “REGISTERING  A
NEW  CONTACT  TO  THE  CONTACT
LIST” from “STEP 3”. ( P.182)
EDITING THE CONTACT DATA
For  PBAP  compatible  Bluetooth
®
phones, this function is available when
“Automatic  Transfer”  is  set  to  off.
(  P.180) 
Page 237 of 294
237
3. ROUTE GUIDANCE
NAVIGATION SYSTEM
8
2. TYPICAL VOICE GUIDANCE PROMPTS
As the vehicle approaches an intersec-
tion,  or  point,  where  maneuvering  the
vehicle  is  necessary,  the  system’s
voice  guidance  will  provide  various
messages.
WA R N I N G
●Be  sure  to  obey  the  traffic  regulations
and  keep  the  road  condition  in  mind
especially  when  you  are  driving  on  IPD
roads. The route guidance may not have
the  updated  information  such  as  the
direction of a one way street.
INFORMATION
●If a voice guidance command cannot be
heard,  select    on  the  map  screen
to hear it again.
● To adjust the voice guidance volume: 
P. 6 3
● Voice  guidance  may  be  made  early  or
late.
● If  the  system  cannot  determine  the  cur-
rent position correctly, you may not hear
voice guidance or may not see the mag-
nified intersection on the screen.