light TOYOTA tC 2010 Accessories, Audio & Navigation (in English)

AUDIO/VIDEO SYSTEM
264
V573_E

► Correct ► Wrong
z Handle discs carefully, especially
when you are inserting them. Hold
them on the edge and do not bend
them. Avoid getting fingerprints on
them, particularly on the shiny side.
z Dirt, scratches, warping, pin holes,
or other disc damage could cause
the player to skip or to repeat a sec-
tion of a track. (To see a pin hole,
hold the disc up to the light.)
z Remove discs from the player when
you are not using them. Store them
in their plastic cases away from
moisture, heat, and direct sunlight.

To clean a disc: Wipe it with a soft,
lint-free cloth that has been dampened
with water. Wipe in a straight line from
the center to the edge of the disc (not in
a circle). Do not use a conventional
record cleaner or anti-static device.

AUDIO/VIDEO SYSTEM
266
V573_E
USB memory device
The table below shows the tested USB memory devices. Depending on its condition,
the USB memory device may not operate properly.
Model Manufacturer Serial No. Capacity
JetFlash V30 1GB Transcend 505024-2172 1GB
JetFlash V10 8GB Transcend 201061-2998 8GB
DataTraveler 1GB Kingston EC08610-3475122 1GB
DataTraveler 8GB Kingston CC12823-00039574 8GB
attache 2GB PNY TECHNOLOGIES 8E80-0009 2GB
POCKETBIT MINI 1GB SONY 07718BBCB 1GB
POCKETBIT MINI 512MB SONY 08214BCCV 512MB
USB FLASH MEMORY
1GB TOSHIBA 7441H910168NM8N 1GB
Swivel Flash Drive 8GB Imation 8E80-0014 8GB
Swivel Flash Drive
256MB Imation 8E80-0016 256MB
USB Drive 4GB Verbatim 07070406604G088058AA 4GB
Cruzer Contour 8GB San Disk 8E80-0020 8GB
CruzerMicro512MB
(W hite) San Disk 8E80-0021 512MB
USB Drive 2GB Verbatim 07071706602G030669AA 2GB
USB 2GB extrememory 8E80-0024 2GB
POCKETBIT 16GB SONY 08529EDCB 16GB
USB Drive 2GB CORSAIR 8E80-0027 8GB
JumpDrive Lightning
2GB Lexar 8E80-0029 2GB
Flash Drive 1GB EMTEC 8E80-0031 1GB

APPENDIX
273
V573_E

1. Push the “NAVI” button.

2. Touch “Map SD”.

Confirm the database version on this
screen.
To display the SD memory card cover-
age area, touch “Covered Area” . Con-
firm the covered area on the screen.
Contact any your dealer to find out if
there is a more recent update available.


1. Push the “ OPEN” button.

2. Touch “Open”.
The display can also be opened by
pushing the “
OPEN” button for ap-
proximately 1 second until a beep sound
is emitted.
The display opens to reveal SD memory
card slot.





3. Open the SD memory card slot
cover and push the map SD memory
card lightly to remove it.

— Confirming the database
version and SD memory
card covera
ge area

— Changing the map SD
memory card
SD memory card slot