VOLKSWAGEN ID.5 2022 Owners Manual

x
Carry out pairing only when the v ehicle
is stationary. When some mobile devices are paired,
a PIN is shown on the display of the
mobile de

vice. To finish the pairing proce-
dure, enter this PIN on the Infotainment sys-
tem.
Bluetooth pairing via NFC
NFC is not available in all countries and vehi-
cle models. Depending on the vehicle equip-
ment, NFC is not available in every vehicle
with a wireless charging function.
Prerequisites for one-off pairing:
q NFC technology and a stowage compart-
ment with wireless charging function are
installed in the vehicle.
q NFC is activated on the mobile device. 1. Touch
Select mobile telephone.
2. Unlock the mobile device.
3. Place the mobile device correctly on the stowage area for the wireless charging
function.
4. Continue and confirm Bluetooth pairing in accordance with the displays on the
mobile device and Infotainment system.
The mobile device is paired with the Infotain-
ment system.
The wireless charging function is deac-
tivated while the Infotainment system
is in the
Known mobile phones menu. The wireless
charging function will be reactivated when
you leave the menu.
Managing connections
Prerequisites:
q The mobile device is paired and connec-
ted. 1. Touch
HOME
Mobile devices.
2. Touch the technology desired for the connection. . The mobile device with active
connection is marked.
2.

Touch the name of the desired mobile
device. Other mobile devices then auto-
matically have a passive connection.
User profiles
An individual user profile is automatically cre-
ated for every paired mobile device. Data
from the mobile device are stored in the user
profile, e.g. contact details. A maximum of
ten user profiles can be stored in the Info-
tainment system simultaneously.
Deleting a user profile .
The user profiles are located in the area
Select mobile telephone or Mobile devices.
Active
Passive
Mobile phone interface 24911A012720AB

2. Touch the desired user profile and touch
to delete.
Types of mobile phone inter-
f
ace Please refer to and on page 218.
Depending on country and v
ehicle equip-
ment, the following mobile phone interface
types may be present in your vehicle:

Qi-capable mobile devices with larger dimen-
sions cannot be charged wirelessly.
Bef
ore charging, remove any foreign objects
with metallic components such as coins from
the stowage compartment and observe the
operating instructions for the mobile device.
To charge a Qi-enabled mobile device, re-
move the protective cover and place the en-
tire surface of the device flat in the centre of
the stowage area with the display facing up-
wards. The charging process starts automati-
cally.
The factory-fitted Infotainment system will
provide information about the start of the
charging operation and, where applicable,
about any foreign objects with metallic com-
ponents that are detected in the stowage
compartment. Remove foreign objects im-
mediately.
If the mobile device has not been positioned
correctly in the stowage area or is too large,
it cannot be detected or cannot be detected
correctly. In certain circumstances, the Info-
tainment system will report that there is
a foreign object in the stowage compart-
ment. The fault can be rectified if a suitable
mobile device is used and its position is cor-
rected.
Stowage compartment cover
The storage compartment for the wireless
charging function has a cover for the mobile
device

Using contact data
and enter the contact data
you are looking f or. Touch the contact in
the list to start the call.
OR: touch
Favourites. Touch a contact in
the list to start the call.
OR: touch
All. Touch a contact in the
list to start the call.
Using the call list
All. Touch a number in the list
to start the call.
OR: touch
Missed. Touch a number in
the list to start the call.
OR: touch
Mobile. To start the call,
touch a contact or number.
Entering a phone number manually and enter a phone number.
2.

Touch to start the call.
While you are entering a phone num-
ber, contacts that match the number
will be shown on the Inf

otainment system
display.
Sending text messages
Depending on the mobile device and the In-
fotainment system used, you can send and
receive text messages and emails via the mo-
bile phone interface.
Switching between text messages and email .
2.

Touch the desired inbox. and the
Text message inbox.
2. Touch
Enter new message at the bottom of
the screen and enter a new message.
3. Touch
OK.
4. Touch one or more contacts or the de- sired number in the list. If necessary, you
can search for a contact by means of
Search for contact.
5. Touch
Send.
Sending emails and the
EMAIL inbox.
2. Enter a subject and the message on the screen.
3. Touch
OK and select one or more con-
tacts in the list. If necessary, you can
search for a contact by means of
Search for
contact. Telephone book, favourites
and speed dial buttons
Please refer to and on page 218.
Telephone book
The telephone book is stored in the Inf

otain-
ment system when a telephone is paired with
the Infotainment system for the first time. It
may be necessary to confirm transfer on the
mobile device.
The telephone book is updated each time
a new connection is established. The still ex-
isting telephone book can be used during the
update.
If conference calls are supported, the tele-
phone book can be opened during a call and
a further participant added to the call.
If an image is stored for a contact, this can al-
so be displayed in the list next to the entry.
252 Infotainment system

Favourites and speed dial buttons
A fa
vourite from the telephone book can be
assigned to a speed dial button. If an image is
stored in the entry, this will be displayed on
the speed dial button.
Speed dial buttons must be assigned manual-
ly and are assigned to a user profile

Transporting items
Stowing luggage and
loads Stowing luggage saf
ely in the vehicle

x
Accelerate carefully and gently.
x A
void sudden braking and driving ma-
noeuvres.
x Brake earlier than in normal driving. NOTICE
Rubbing objects on the rear windows can
cause damage, e.g. to the heating wires of
the rear window heating. Luggage compartment
co

ver .
Remo

ving the luggage compartment cover

The rear part of the luggage compartment
floor can be f
olded forward

NOTICE
Incorrect use can damage the second lug-
gage compartment floor or the trim of the
luggage compartment.
x Always guide the second luggage com-
partment floor down carefully when clos-
ing and do not allow to drop.
x Always distribute loads (
maximum 50 kg)
over as wide an area as possible on the
luggage compartment floor in order to
avoid point loads. Partition
Fitting and removing the par-
tition behind the rear bench
seat
Fig. 129
P
artition installed behind the rear
bench seat
The fitted partition can help to prevent ob-
jects from being flung from the luggage
compartment into the passenger compart-
ment, e.g. when braking.
The partition can be optionally installed be-
hind the rear bench seat

x
Always check after installation to make
sure that the retaining hooks of the par-
tition are correctly engaged.
x Additionally secure all objects in the lug-
gage compartment e
ven when the parti-
tion is installed.
x While the vehicle is moving, no passen-
gers may travel behind the fitted parti-
tion. NOTICE
If the partition is not secured at the mount-
ing points pro
vided for this purpose, this may
result in damage.
x Always secure the partition only to the
designated mounting points. Fitting and removing the par-
tition behind the front seats
Fig. 130
P
artition installed behind the front
seats.
The fitted partition can help to prevent ob-
jects from being flung from the luggage
compartment into the passenger compart-
ment, e.g. when braking.
The partition can be optionally installed be-
hind the rear bench seat