VOLKSWAGEN JETTA 2009 Owners Manual

Booklet 3.2 Tips and Advice
Fuses in the fuse box A in the dash panel
Electrical consumer
Fuse number (amp
ratin g in bra cke ts )
ABS /ESP/E DL 2
(5)
Tran sm iss ion (2.5 1 14 (5)
and 1.91 engine)
Front pow er wi nd ows 23 (30)
powe r 32 (30)
Fan 22 (40)
wi ndow de- 25 (25)
fogger
S tee rin g. DSG • 6 (5)
Int erior light s
15 (7,5 )
Fuel pump 27 (15)
A irbag 3 (5)
roof
33 (25 )
Se at hea ting
4 (5), 37 (30). 46 (5 )
8
48
V aca nt
20
Auxiliary hea tin g'
16 (10), 25 (25) 47 (10)
Pow er outl et 26 (20)
Cc n
lock ing for 12 (IO}
fr ont doo rs
H eat ed was her je ts 46 (5)
Lumb ar support ad- 34 (15)
ju stment for front
sea ts
C igare tte light er
24 (25)
Fuses in the fuse box Bin the engine compart­
ment: vehicles with a
54 fuse box
Electrical consumer
Fuse numb er (amp
rating in bra cke ts)
Fl (30). F2 (30)
L eft turn signa l F47 (40 )
turn s ignal (40 )
I-lorn F5 (15)
D SG' FI3 (15 )
light s
F47 (40), (40)
80 What do I do now?
F19
v\l ind shi eld wip ers (3 0)
Lef t headlight F47
(40)
headlight F48 (40 )
So und system
(30)
L ef t sid e lig ht F47 (40 )
sid e light F48 (40 )
release
Ce ntral lock ing for (2 0) rea r door s
Fuses in the fuse box B in the engine compart­
ment: vehicles with
a 30 fuse box
Electrical co nsum er
Fuse number (amp
rat ing in bra ckets )
A BS F4 (30),
(30)
W ind shi eld wip ers Fl (25 )FJ9 (25)
F8 (15 )
H orn FI7 (15 )
DSG' F5
(15)
Turn sig nal ri ght
F25 (40 )
Turn signal left F26 (40 )
Aux iliary heat ing •
Fil (20)
T e le phon e•
F9 (5)
Fu el pump (di esel)
(5)
Fan F24 (IO )
F og lig ht s F25 (40 )F26 (40)
h ea dli ght
F26 (40 )
headlight F25 (40 )
WARNING
Using the wrong fuse and attempting to repair
a fu se or u singsomethingin stead of a fuse can
cause a fire and serious per sonal inju ry.
• Always read and hee d the information and
a ll WARN INGS.
Tips
T he tabl es show the fu se loca tion s for the mo st
important consumers. The right -hand column s

contain the in se rt loca tio n, the figur es in
bra cket s indi ca te th e a mp ere rating for th e fuse.
O ne c on sum er mi ght re quir e seve ral fu ses (also
in separat e fu se boxes) .
• Seve ral con su m ers cou ld
over on e sin gle
fu se .
Changing a light bulb
Changing light bulbs
Booklet 3.2 Tips and Advice
• T he fuse b ox in the dash pan el h as spa ce fo r
r ep lace ment fuses .
• There a re o th er fu se s in th e vehicle. Th ese
s h ould be chan ged by a qua lified d ealer ship .
Light bulbs should be changed by a qualified t echnician only.
Light bulb s should b e chan ged onl y by qu alifie d
t ec hni cian s. In man y cases c han ging a light bulb
in vo lves re m ov ing oth er
of th e vehicl e to
ge t to the burnt- out ligh t bulb, pa rticularl y tho se
i n th e front of the v ehicl e th at can on ly be
r eac hed th rough th e eng in e co mp artm ent.
We reco mm end that light bulb s o nly be c ha nge d
b y an auth ori ze d Vo lksw agen deale r or qua lified
w ork sh op.
Before ch an ging a light bulb , you mu st s wi tc h off
th e light (light switch in Op osition ). and th e turn
s igna l lev er must b e in the neutra l p os iti on.
A lw ays rep la ce burnt- out light bulb s with id en ­
ti cal light bul bs w ith same spe cificatio ns. Th e
spe cifica tio ns are printed on th e light bul b, ei­
th er on th e g lass bu lb or on th e m etal base. /\!­
wa ys mak e sure th at th e c olo r of th e new bulb s is
th e sa me as th e re p lac ed ones.
It is ad visa ble to always carry a box o f rep lace ­
m ent light bulb s in yo ur ve hicl e at all tim es. The
box s hould co nt ain at l eas t th ose light bulb s th at
ar e import ant fo r traffi c
See your V olk­
sw age n deale r f or rec omm end ed light bulb s.
WARNING
Slop ! Before working in th e e ngi ne comp art ­
ment, alway s read a nd heed all WARNINGS
34. The engine compartmen t of any
motor vehicl e is a potentially dangerous area
and c an cau se ser ious personal injury.
WARN ING (continu ed )
• Gas discharge lam ps (Xeno n) get pow er
from a high voltage so urce that can cause se­
ri ous personal injury and even death
ways have a qualified tec hni cian replace
burnt-out ligh t bulbs, especia lly gas discharg e
l amps (Xenon) a nd 1-17 light bulbs.
WARNING
Neve r remove the hea dlight unless yo u know
exact ly ho w to carry out the job and have the
co rrec t tool and light bulb s.
• If you a re un cer ta in about what t o do , h ave
th e work performed by a n auth ori zed Volk­
swage n dealer or a qualified worksho p. Se ­
rious per sonal injury may result from improp ­
e rl y perfor med work.
• Do not tou ch glass bul b w ith b are hand s. Fin ­
ge rprint s can cloud the out er surfa ce of th e bulb
w hen hea ted, thu s aff ec tin g th e refl ectio n, and
th us re duci ng th e powe r of illumin ati on.
•
b ulb can on ly be repl aced by a bulb of the
s am e ty pe. T he m odel i dent ifi cat io n is e ith er on
t h e bulb base o r on t he bul b itse lf.
What do I do now? 81

Booklet 3.2 Tips and Advice
Changing the headlights and front turn signal bulbs
Fig. 3 6 Cove r A fo r low b eom , co ver B for high
beom a nd position lamp
Changing th e low beam headlight
bulb
- Switch the headlights ofT.
- Sw itch off the ign ition and remove the
k ey from the ig nition loc k.
- Ope n the engi ne hood.
- Turn the cover
36arrow @ to the
ri ght and re m ove .
- Turn the bulb hold er t o the lef t and re­
move.
- Pull t he defec tive bul b out of the h older
a nd install a new bul b.
- Rein sta ll th e bu lb holder by turning
int o th e rig ht.
- Replace the cover by turnin g it to th e
left.
Changing the high beam light bulb
- Switch the head light s off .
- Switch off the ig ni tion and re m ove the
k ey from the ignit ion lock.
- Op en the en gin e hood.
- Pull the rubb er cover off
36a rrow
82 What do I do now?
F ig . 37 In the headlight : high beam bulb 3 and po­
sition lamp bu lb 4
- Remove the conn ector @.
- Move the w ire retainer
82, fig. 37
towa rd the front of the vehicl e and the n
pu sh it in the d irec tion of th e a rrow out
th e re tai nin g lug s
- Fold the w ire hook up.
- Remove the bulb holder from the head-
li ght.
- C hange the bulb.
- Place the bulb holder back in the head-
l ight. Make sure th e reta ining
a t
th e botto m.
- Fold the w ire hook dow n and engage it
in th e opposit e di rect ion sh own by th e
arrow in the re ta inin g
Gently pu ll
o n th e w ire hook to check it h as engaged
sec urely.
- Connec t the connector @to th e bulb
ho lder.
Changing a side light bulb
- Remove the bulb holder 82,
fi g. 37
from the headli ght.
- Change the bulb.

-Place the bulb holder insert back in the
h ead light. Make sure the hold er is prop erl y
i n se rted.
- Push the
82, fig. 36
th e headlight.
Replacing the turn signal light bulb
Fig . 3 8 Bulb ho ld er for the tu rn signo l
The bulb ho lde r for the turn signal is lo­
ca ted undern eath the headlight /po sition
l amp.
Booklet 3.2 Tips and Advice
If yo u ar e unc ert ain ho w rep lace a de­
fective bulb, see yo u authorized Volk swage n
de aler for assis tance.
- Swi tc h the light off.
- Switch off the ig nition .
- Open the eng ine hood.
- Turn the bulb holder as far as it wi ll go
in the direc tion of the a rrow
38 .
- Remove the bulb holder from the hea d­
light.
- Cha nge the bulb.
- Rep lace the bul b holder in th e head-
li ght and turn it as far as it will go in the op­
po site direction to the arrow.
If you are un certain abo ut how re pla ce a d e­
f ec tive bulb , see you authorized
dea le r fo r ass is tance.
Changing the bulb for the brak e light or rear turn signal
Fig . 3 9 Broke light and rear turn signa l bu lb holder unit
Changing the bulb
- Open the rea r lid.
- Loca te th e cover in the luggage com-
partm ent trim panel to access the bulb
hold er and open it.
- Disco nn ect co nn ector
39
- Press the release ta b s =£l g. 39 (a rrow s}
and pull the bulb h older ou t.
- Repla ce the defe ctiv e bulb.
- Rein sta ll th e bu lb hold er secur ely.
- Reconnec t the connecto r@ .
- Rein stall the cove r in th e trim panel.
What do I do now ? 83

Booklet 3.2 Tips and Advice
If you are un certain ab out ho w to re pla ce a d e­
f e ct ive bulb, see yo u auth orize d Volk swagen
d ea le r for assis ta n ce .
Changing the bulb for the back-up light
The bu.lbs are located in the rear Lid.
Fig. 40 Boc k-up bu lb ho ld er
- Open the rear lid.
Jump starting
Jumper cables
- Locat e the cover in the rea r lid trim
pan el to access the bulb holder and open
it.
- Ex pa nd th e tw o re taining tabs in the di­
r e ct ion of the arrow s
40and pull the
bulb holde r out.
- Replac e th e defect iv e bu lb.
- Rein stall the bulb holder securely.
- Rein sta ll th e co ver in the rear lid trim
panel.
If you are unc ertain about ho w to re plac e a de­
f ec tive bulb , see y ou auth orized Volkswa gen
d ea ler for a ssis tanc e.
The jumper cables have sufficient cro ss sec tion.
If th e engin e does not sta rt beca use the batt ery is
di scharg ed , yo ur vehicl e's batt ery b e co n­
n ec te d to th e batt ery of anot her veh icl e 10 s tart
t h e e ngin e.
Jump er cab les
Th e cro ss sec tion mu st b e a t leas t 0.03B (25 111111 2
) fo r gaso line en gin es a nd at l eas t
0.0 54 (35 111111 2
) fo r di ese l en gin es.
84 What do I do now?
Note
• Do n ot le t the vehicle s tou ch eac h oth er, oth­
e rw ise curr ent cou ld flow a s soo n as th e plu s(+)
t e rm inals are co nne cted. If necess ary, u se lon ger
jump er cabl es.
• The di sc ha rge d batt ery mu st be prop erl y
co nnec te d
to th e ve hicl e's elec tri ca l sys tem.

Booklet 3.2 Tips and Advice
4.
1.
Fi g. 41 How to connect the jumper cables
In th e 41 th e di sc har ged batter y
is the c har ged battery.
Attaching the jumper cables
- Sw itch off th e igniti on on both vehicl es
I. Co nne ct one end of the red jump er to
po siti ve 41 termin al of the ve­
hi cle w ith the disch arge d batter y@ .
2. Co nnect th e other end of the re d
jumper lea d
to the p ositive terminal of
th e batter y supp ly in g th e elec trici ty ® ·
3 . Co nne ct o n e end of the black jumper
l ea d to the neg ative terminal
the
batte ry sup plying th e elec tricity ®·
4 . Conn ect the othe r end of the black
jumper lead
a so lid m etal co mpon ent
w hich is bol te d on to the engin e block, or
onto the e ngin e bl ock itse lf of the ve hicle
wi th the d isc harg ed battery. Do nor con­
n ect it to a po int n ear
batter y@ .
5. Position
leads in su ch a way that
they cannot come into conta ct w ith any
mo vin g part s in th e e ngine compa rtment.
Starting the engine
6 . Start en gine of vehicle providin g
ass ista nce with the booster batte ry and let
it run at id le speed .
7. Start the eng ine ofr he ve hicl e w ith the
di scharg ed batter y and wait o ne or two
m inut es unt il th e en gin e is runn ing
s mooth ly.
Removing the jump leads
8. Before yo u remov e th e jum per ca bles,
swi tch off the headli ghts ( if th ey are
on).
9. Turn on the hea te r blower and rea r
w ind ow defro ster in the ve hicle wi th th e
d isc ha rged battery . Thi s help s m inim iz e
v oltag e peaks w hich are ge ner ated when
t h e le ad s are disco nnect ed.
10 . W hen th e engin e is ru nnin g, d isco n­
nect the jumper cable in reve rse order a s
desc ribed above.
Con nect th e battery clamps so the y ha ve good
metal- to- meta l co ntact w ith the battery termi­
na ls.
If th e eng ine does not start , turn off th e s tarter
afte r about 10 seco nds and try aga in afce r ab out
30 seco nds.
WARNING
S to p! B efore wo rking in the engine comp art ­
ment, al ways read and he ed all WAR NIN GS
34 . The engin e compartment of any
motor v ehicl e is a pote ntially dan gero us area
and ca n ca use se rious per sonal inju ry.
WARNING
Improp er u se of jum per ca bles w hen jump
s tarting a ve hicl e with a dead can ca use a bat ­
tery to exp lode leading to seriou s perso nal i n­
jury. To help reduce the risk of batt ery exp lo-
s ion:
What do I do now? 85

Booklet 3.2 Tips and Advice
WARNING (continued)
• Always make sure that the battery pro­
v idin g ass istance has the same vo ltage as the
discharged battery (12V) and approximately
the same ca pacity (see battery label).
• Neve r jump start a ve hicle with
rrozen
batt ery. 1r a battery is or has been frozen, re­
pla ce it.
• Batteries giv e
explosive hydrogen gas.
A lways keep sparks, open flame and
smoking materials away from batteri es.
• Never short out the battery pole s by con­
necting the positive
and nega tive po les
with eac h other .
• Always follow the jumper cab les ' manufac­
turer's instruct ions.
• Never co nn ect the negati ve cab le from the
other vehicle directly to the negat ive terminal
or the discharged battery. The hydrogen gas
rrom the battery is exp losive.
Towing
WARN ING (continued)
• Never attac h the negative cable from the
ve hicl e providing starting assistance to parts
of the fuel syst em or to the brake hoses o r
brake lines.
• Never a llow the non -in sula ted parts of th e
batt ery clamps to touch. Never allow the
jumpe r cab le a ttached to the positive battery
t ermina l to contac t metal parts of the vehicle.
• Alw ays route the jumper cables so that
th ey can not ge t tangled up with moving parts
in th e engi ne c ompartment.
the vehicl e's e lec­
tri cal sys te m.
• Do not l et
veh icles touch eac h oth er. Oth ­
e rw ise curr ent could fl ow betwee n the ve hicles
a s soo n as the plu s(+) te rminal s are
co nn ect ed.
67.
86 What do I do now?
Fig. 43 The front right secti on of the vehicle: fitti ng
t he towing eye
- Rem ove the scre w 42 usin g the
sc rew dri ver.

-Press the cove r together u sing both
hand s in the direc tion or th e arrows
42 and pull the cover
Booklet 3.2 Tips and Advice
-Screw th e tow ing eye into the t hread ed
ho le , turnin g
co1111t er-cl ockwi se as far as it
will go
43.
- Use the wre n ch for leverage to tighten
the towing eye.
Towing eye at the rear of the vehicle
Fig. 44 Rear lawing eye
General notes
Installing the towing eye
-Take the towing eye , the wrench a nd
th e sc rew driver out of the vehicl e tool kit
=;:iage 67.
- Pull the cover down and lea ve it
hanging on the vehicl e
- R em ove the cove r on the threaded hole.
- Screw t he towin g eye into th e thr ea ded
hol e, turning
co 1111r er-clockw ise as fa r as it
w ill go
44.
- Use the wrench for leve rage to tight en
the tow ing eye.
po ssi ble tow with the fron t wheels off ground
A lways observe the following use a
t ow-rope :
Notes for the driver of the towing ve­
hicle
- Turn on the emerge ncy flas her.
- Driv e slowly at fir st until th e tow-ro pe is
taut. Then acce lerate graduall y.
- Press the acce le rator slow ly .
- Remembe r that the brak e boo ster and
po we r stee rin g ar e not working in the ve­
hi cle you are tow ing. Brake earlier and
mor e gently than you wo uld n orm ally
Do not drive than 30 mph (50
k m /h ) and furth er tha n 30 miles (5 0 km ).
Notes for the driver of the towed ve­
hicl e
-Turn on the emergency flash er.
- Move the selecto r leve r or gears hi ft
l ever to the neutral posi tion (NJ
- Make sure tha t rh e tow -rope is taut at a ll
Tow-ro pe or tow -bar
It is easier and sa fer to tow a vehicle with a tow­
bar . O nl y use a tow- rope if yo u d o no t h ave a
tow -bar.
A tow -rope s hould be sli ghtl y e las tic to re duce
th e lo adin g on both vehicl es. U se
tow-rope
mad e of sy nthetic fib er or sim ilar ela sti c m ate -
r ia l.
What do I do now? 87

Booklet 3.2 Tips and Ad vic e
Attach the tow-rope or the tow-bar only to th e
tow ing eyes provid ed .
D riv in g s ty le
T ow ing require s some exper ie nc e, es pecia lly
when using a tow -rope. Both driv ers should be
familiar w it h th e tec hn iqu es required for tow ing.
In ex perienced drivers should not try to tow an­
o th er ve hicle.
Do not pu ll to o hard w ith th e towing vehicle and
a vo id j erking the tow- rope . When tow in g on an
unpa ved road, there i s alway s
risk of over­
l oad ing and damaging the an ch orage points .
T he ignition oft he ve hicle be in g towed must be
s witched on to prevent the stee ring whee l fro111
lo ck ing. Also ensur e that the turn signals, horn,
windshield wipers and wash ers work properl y.
Keep in mind that the brake b ooste r d oes not
work when th e e ngine is not running. You will
hav e to apply considerably more pressure to th e
brak e pedal than you wou ld nor111a lly.
A lso the pow er stee rin g do es not work when the
e n g in e is not running. You will n eed m ore for ce
to stee r than you would norma lly.
Tow in g ve hicl es w it h an aut om atic tran smi ssio n
• Move the se lec tor leve r to N. •
Do not drive fa ster than 30 mph (50 km/h)
wh en towing a ve hicl e.
• Do not tow further t han
3 0 111iles (50 km ).
• lfa tow tru ck i s use d, th e ve hicle must be
tow ed with a ll w heels off the ground .
WARNING
Towing a vehicle c hange s th e way yo ur vehi cle
h an dles a nd br akes. To help re du ce t he risk of
an acci den t lead ing to se rious persona l injury,
no te th e fo llow ing:
• T he dr ive r of t he ve hicle t hat is be ing
towe d:
- Will h ave to p ress th e bra ke peda l con­
s id era bly harder than no rm al beca use th e
b ra ke boos te r i s not a cti ve. Always be alert
no t to rear-end the tow ing ve hicle .
- Will h ave to use cons idera bly more fo rce
t o t urn th e steerin g w hee l, b eca use th e
power steer ing is not active.
• The driver o f the ve hicle that is tow ing:
- Must accelera te grad ually a nd ge ntle,
avo id je rkin g m oveme nts.
- Must b ra ke ear lier a nd more gentle t han
yo u wo uld norm ally
When can your vehicle not be towed?
Yo ur ve hicle m ay no t be towe d un der the fo l­
l ow ing con ditions:
• If th e tran sm iss ion mal fun cti o ns and there is
no tran smis sion flui d.
• I f th e veh icle e lectr ical sys tem is not func ­
ti o nin g beca use the s tee ring will lock up.
• If yo u ha ve to driv e fu rth er th an 30 mile s (5 0
• If the front or rea r axl e is off th e ground
because you dama ge th e gea r.
In the se cases the vehicl e mu st be transport ed
o n a car c arrie r or trailer.
WARNING
If you still tow your ve hicle un der these co ndi­
tio ns, you could ca use an acci dent or ca use
d am age to th e ve hicle. Thi s w ill n ot b e covere d
by your Limit ed New Ve hicle Warra nty .
88 Wha t do I do no w?
Do no t tow your ve hicl e beh ind a re cre a tional
vehicle . The Automatic transmi ssio n can be se­
ve re ly damaged. This can happ en even if these ­
l ec to r lever is in th e N (Ne utral) pos ition.
• If th ere is no oil in th e tra nsmi ssio n because
o f dama ge to yo ur vehicle , th e veh icl e s hould b e
mo ved with a ca r carrier .
• If th e front or rear axle is lift ed off th e grou nd,
thi s will serio us dama ge the dr ive gea r.
• If th e veh icl e ha s to be towe d more than 30
mi les (5 0
all whee ls must be rai sed to tow
t he vehicle. The vehicle should be m oved with a
car carrier .
• If vehicle has no e lec trica l po we r, th e
s te erin g will be locked. The ve hicle must

then be towe d w ith all w hee ls rai sed. The ve hicle
s h ould be m ove d with a car
45 ..
Usin g th e ve hicle jack lift the vehi cle 72 .
To p reve nt damage to the un derbo dy of the ve­
hicl e when lifting th e vehicl e, rubber pads must
be used.
B efo re driv ing o nto a flo or jack. yo u mu st chec k
make s ure that there is enou gh clea rance be ­
tw een low of the vehicle and the floor jack.
WARNING
Improp erl y your vehicl e with a floor
ja ck can cause the fl oor
j ac k and cause seriou s perso nal inju ry:
Booklet 3.2 Tips and Advice
WARNING (continued)
• Always lift your vehicle on ly at th e des ig­
nated lift point s shown in the illu strations.
• Neve r allo w anyone to sta y in the ve hicle
when it is bein g lif ted or when it is
the
ground.
• Not u sin g the des ig nated lift point s can
ca use the vehicle to fall
the floor j ack when
hea vy part s such as the en gine or tran smi s­
s ion are rem oved.
• If yo u must work under a veh icle rai sed on
a floor j ack, alway s mak e sure that the vehicle
i s sa fely supp orted on safety stands int end ed
for that purpose that arc strong e nough to
s upport th e we ight of the ve hicle.
•
mak e sure th at th e weight of th e ve­
hicl e is not h eav ier than th e liftin g capac ity of
th e floor jack bein g used.
• Never start the engine when you have
rai sed th e vehicle on the floor jack. The engin e
v ibration s and vehicle move ment s co uld
knock the vehicle
the floor jac k.
Note
• Lifting yo ur vehicle at any point s oth er than
th e de signated lifting po int s c an cause se rious
damage
th e veh icle.
• When drivi ng yo ur vehicle on
10 hoist, m ake there is suffici ent cl earanc e betwee n
th e ho is t a nd bot1om of the
What do I do now? 89