headlight aiming ASTON MARTIN DB AR1 Q 2003 Owners Guide

F - Owner Maintenance
1-F-45
On Board Headlight Aiming (where fitted)
The headlight assemblies (main and dipped beam lights) are factory set to
give correct forward illumination under average load conditions. Should
your headlight aiming require adjustment, it may be corrected as follows:
1. Ensure that the tyres are inflated to the specified pressures.
2. Fill the car with fuel.
3. Park the car on level ground.
NOTE: Any error in ground level will adversely influence the accuracy of the
vertical beam alignment check
4. Have an adult person sit in the drivers seat.
5. Load the boot with the normal items you carry.
6. Open the bonnet.
Horizontal Beam Alignment Check
1. Check the gauge labelled Horizontal Angle Gauge. The green line on the
collar must be aligned with the pointer at the side of the spirit level. If
adjustment is required, rotate the screw and collar until the green line
is aligned with the pointer.

Index
5-A-4
M
Main and Dipped Beam Switching 1-B-13
Maximum Engine Speed 1-C-9
Mirrors
Interior Mirror 1-A-13
N
Number Plate Lights 1-F-50
O
On Board Headlight Aiming 1-F-45
Owner Maintenance 1-F-2
Electronic Fuel Injection 1-F-2
Emission Warranty 1-F-3
Engine Compartment Covers 1-F-3
Parts and Lubricants 1-F-3
P
Passive Anti-Theft System 1-E-7
PATs Status 1-E-8
Starting the Engine 1-E-7
PATs Status 1-E-8
R
Rain Cover 1-A-7
Rear Interior Quarter Lights 1-F-51
Rear Lights 1-F-48, 1-F-49
Recommissioning After Storage 1-F-60
Regular Checks Forward-xi
Each Day Forward-xi
Monthly Forward-xii
Weekly Forward-xi
Reporting Safety Defects - ROW Forward-x
Running-In 1-C-9
S
Seat Belt Fastening 1-A-14
Seat Belt Pretensioner 1-A-14
Seat Belt Warnings 1-A-16
Seat Belts
Automatic Locking Retractors (ALR) 1-A-15
Care and Maintenance 1-F-57
Child Seat Removal (ALR System) 1-A-16