change time AUDI A3 CABRIOLET 2015 Owners Manual

....,
N
r--. > co
rl I.O
"' rl
"' rl
Service interval display
The service interval display detects when your
v e hicle is due for service .
Fig. 6 In str um en t cluste r: serv ice inte rva l d isp lay (ex ­
a m ple)
Fig. 7 Disp lay in th e MMI panel: se rv ice interval display
(exa mple )
The serv ice interva l display works in two
stages:
- Inspection or oil change reminder : After a
certain distance driven, a message appears
i n t he instr ument cluster d isp lay each time
the ignit ion is switched on or off
r=> fig. 6.
The remaining distance or t ime is d isplayed
briefly.
- Inspect ion or oil change due : If your vehicle
is due for a n insp ection or o il change or
bot h, a message appears br iefly in the in ­
strument cluster d isplay when switching the
ignition o n or off:
In spection due! or Oil
change due! or Oil change and in spection
due!.
Checking service intervals
You can check the remaining distance or time
until the nex t oil change or next inspection in
the M MI
¢ fig. 7. Se lect t he I MENU ! button >
Instruments and indicator lamps 13
Car > Systems* control button > Service &
control
> Service intervals .
Resetting the display
Your a uth orized Audi dea le r or auth oriz ed
A udi Se rv ice F acility will rese t the service in ­
te rv al disp lay after pe rfo rmi ng se rvice.
I f you perfo rm an o il change you rself to the
A udi spe cifications, yo u can reset yo u service
in terval disp lay.
T o reset the display, select the
!ME NUI button
> Car > Sy stem s* control button > Service &
control
> Servi ce interval s > Reset oil change
interval.
(D Note
- On ly r eset th e oil chang e indicato r if th e
oil was cha nged.
- Following the se rv ice intervals is critical
t o m ain ta ini ng th e se rv ic e life a nd val ue
o f yo ur v ehicl e, espe cially th e e ngine.
E ven i f the mile age on t he vehicle i s low,
d o no t exceed the time for th e nex t serv ­
ice.
- Calcu lating t he time to the next oil
c hange is in te rrupt ed whe n the vehicle
battery is dis connected. If t he vehicle is
n ot d riven f or a long period o f time,
check the ma intenance schedule so th at
you ca n follow the maintena nce inter­
vals.
Indicator lights
Description
Fig. 8 Instrum en t cluste r: example of a display in
vehicles wit h a mo noc hrome display
@ Ind icator light

....,
N
r--. > co
rl I.O
"' rl
"' rl
Lights and Vision
Exterior Lighting
Switching lights on and off
Fig. 42 Instrument panel: lig ht switc h (example)
The headlights only work when the ignition is
switched on. The headlights turn off automat­ ically when the engine is switched on or when
the ignition is switched off. Only the side­ marker lights stay on .
A warning symbol will appear in the driver in­
formation display if the system is not func­
tioning correctly <=>
page 24.
Light switch ·'ti- ·
Turn the switch¢ fig. 42 to the corresponding
position . When the lights are switched on, the
respective symbol turns on.
0 -lights off. In some countries, the day time
running lights* are turned on and off together
with the ign ition.
- USA models: The daytime running lights
switch on automatically when the ignition is
switched on and the light switch¢
fig. 42 is
in the
O position or the AUTO position (on ly
in daylight). The
Daytime running lights
can be switched on and off in the MMI
¢ page 51 ¢ ,& .
-Canada models: The daytime running lights
switch on automatically when the ignition is
switched on and the light switch¢
fig. 42 is
in the
0, the :Do: or the AUTO position (only
in daylight) ¢
,&.
AUTO* • Automatic headlights switch on and
off depend ing on brightness, for example in
tw ilight, during rain or in tunnels. In vehicles Lights
and Vision 49
with integrated daytime running lights*, ei­
ther the daytime running lights or the head­
li ghts will turn on automat ically, depending
on the amount of light (may vary depending
on the country).
: Do : -Parking lights
iD -Low beam headlights
The following w ill happen in these light
switch positions when you lock the vehicle:
-io -Low beam: the entire exterior lights
sw itch off
- AUTO*: the Coming home* function is
turned on ¢
page 51
Fog lights*/rear fog light(s)
Press the corresponding button¢ fig. 42:
JO· Front fog lights* (not pictured). This but­
ton replaces the button for all-weather
lights
q;!D . When the fog lights are switched
on, the
JO symbol in the button illuminates.
0$ -Rear fog light(s) . When the rear fog lights
are switched on, the
0$ symbol in the button
illuminates.
All-weather lights*
apples to vehicles with LED headlights.
Press the corresponding button
<;?P c;, fig. 42
on the light switch.
~io -All-weather lights . The symbol <;;t,;D in the
button lights up when all-weather lights are
switched on.
In vehicles with all-weather lights, the front
lights are adjusted automatically so that you
are less likely to see glare from your own
headlights, for example when driving on a wet
road .
Headlight range control system
The head light range adjusts automatically
when there is a change in vehicle load and
during braking and accelerating so that the
headlights do not cause glare for oncoming
traff ic.

M N ,....
> co ,...., \!) ..,.,
,...., ..,., ,....,
The emergency flashers makes other drivers
aware of your vehicle in dangerous situations.
.,. Press the~ button to sw itch the emergency
f lashers on or off.
You can indicate a lane change or a turn when
the eme rgency flashers are sw itched on by us­
i ng the turn signa l lever. The emergency flash­
ers stop temporarily .
The emergency flashers also work when the ignit io n is tu rned off.
(D Tips
You should switch the emergency flashers
on if:
- You are the last ca r in a traffic jam so
that all other veh icles approach ing from
behind can see you, or if
- Your vehicle has broken down or you are
having an emergency, or if
- Your vehicle is being towed or if you are
tow ing another vehicle .
Turn signal and high beam lever
The lever operates the turn signals, the high
beams and the headlight flasher.
Fig. 44 Turn sig na l and high beam lever
Turn signal s¢¢
The turn s ignals activate when you move the
l ever into a turn s ignal position when the igni­
tion is switched on.
(D-Turn signal
@-Turn signal
The turn signal blinks three times if you tap
the lever (convenience turn signal).
Lights and Visi on 5 1
High beams and headlight flasher [D
Move the lever to the correspo nding posit io n:
@ -high beams on
©-high beams off or headlight flasher
T he
II indicator light in the instrument cl us ­
ter turns on.
A WARNING
High beams can cause glare for other driv­
ers, which increases the risk of an acci­
dent. For this reason, on ly use the high
beams or the headlight flasher when they
will not create glare for other drivers.
Adjusting the exterior lighting
The settings ore adjusted in the MMI.
... Select: the I MENU I> Car> Syste ms* control
button
> Vehicle sett ings > Exte rior light­
ing .
Automatic headlights
You can adjus t the following se ttings in the
Automatic headlights menu :
Activation time : -Yo u can adjust if the head­
l igh ts sw itch on
ea rly , medium or la te ac co rd­
ing to the sens itivity o f the light sensor.
Audi adapti ve light * -you ca n sw itch adaptive
li gh t
on and off .
Coming home, Leaving home*
The coming home function illuminates the
area outside the vehicle whe n you tu rn the ig­
nition off and open the d river 's doo r. T o turn
the function on, se lect
Light s when l eaving
c ar > on .
The leaving home illum inates the area outs ide
the vehi cle when you un lock the vehicle . To
turn the function on, se lect
Light s when un ­
locking car > on .
The coming home and leaving home funct ions
on ly operate when it is dark and the light
switch is in the
AUTO position. ..,.
•

....,
N
r--. > co
rl I.O
"' rl
"' rl
What can adaptive cruise control do?
The adaptive cruise control system uses rada r
and a video camera. The radar is subject to
designated system limits ¢ page 87.
On open roads w ith no traffic, it functions l ike
a cruise control system . Th e stored speed is
maintained . When approaching an object
ahead and the system detects it, the adaptive
cr uise control system automatically brakes to
match that object's speed and then maintains
the stored distance. As soon as the system
does not detect an object ahead, adaptive
cru ise control accelerates up to the stored
speed .
With in the limits of the system, adaptive
cru ise control can brake in stop-and-go traff ic
until the vehicle is stationary and then begin
driving aga in under certa in conditions
¢ page 91, Driving in stop-and-go traffic.
Which functions can be controlled?
When you switch adaptive cruise control on,
you can set the current speed as the "control speed" ¢ page
89, Switching on/off.
When driving, you can stop cruise control
c::> page 91 or change the speed c::> page 90
at any time .
You can also adjust the following settings:
- Dis ta nee
c::> page 92
- Driving program c::>page
93
- Driving mode c::> page 93
l) Speed limit s depend on the country and the speedom ­
eter .
Audi adaptive cruise control 89
Switching on/off
Applies to vehicles: wit h Aud i adapt ive cr uise contro l
Fig. 88 Oper ating lever: swit c hing on and off
Fig. 89 Instrument cluster: adapt ive cruise control
You can set any speed ll between 20 mph and
95 mph (30 and 150 km/h).
Indicator lights and messages in the instru­
ment cluster disp lay inform you about the cur­
rent situation and settings.
Switching adaptive cruise control on
.,. Pull the lever toward you into posi tion (I)
c::> fig. 88. ACC: standby appears in the in­
strument cluster display.
Saving the speed and activating regulation
.,. To save the current speed, press the ISETI
c::> fig. 88 button. The stored speed is shown
in the tachometer LED line@and appears
briefly in the information line @ c::>fig .
89 .
.,. To activate the regulation while stationary,
you must press the brake pedal. ..,.

"" N
r--. > co
rl I.O
After each change, the new stored speed ap­
pears briefly in the information line
c::> page 89, fig. 89 @.
Driving in stop-and-go traffic
Appl ies to vehicles: w ith Audi adaptive cruise co ntrol
The adaptive cruise control system assists you
in stop-and-go traffic. If an object that is de­
tected ahead stops, your vehicle will brake
and stay at a stop, within the limits of the sys­
tem.
St arting with ad apti ve cr uise contro l
1l
If you vehicle brakes to a stop because an ob­
ject is detected ahead,
ACC a utom . go ap­
pears briefly in the instrument cluster display
Your veh icle is in automatic start mode .
As long as the message
ACC autom. g o is dis­
played and the object detected ahead starts
to move, your veh icle w ill cont inue d riving
c::, & -
You can activate ACC autom . go again for a
short time by pulling the lever to posit ion @
c::>page91, fig. 91
The start mode ACC autom . go ends when the
brake pedal is pressed.
C rit eria fo r swi tch ing off
The adaptive c ruise co ntrol switches off for
safety reasons when stationary:
- when the dr iver's door is open,
- when the vehicle is stationary fo r more than
3 m inutes,
- when the dr iver's safety belt is not fastened .
A WARNING
If the message ACC autom. go1l appears,
the vehicle continues dr iving, even if there
is an obstacle between your veh icle and
the object ahead . This increases the risk of
an accident.
"' rl
"' 11
This is not available in som e co unt ries. rl
Audi ad apti ve crui se control 91
@ Tips
If adaptive cruise contro l is active and your
vehicle does not start driving even though
the message
ACC autom. go1l appears,
you can start by tapp ing the accelerator
pedal.
- If an obstacle is detected when driving
w ith adaptive cru ise control, the system
w ill request you to beg in driving
c::>page 93. You vehicle will beg in d riv­
ing more slowly. This can also happen in
sit uat io ns where t he re is no visible ob­
s ta cl e.
Interrupting cruise control
App lies to vehicles: wit h Audi ada ptive c ruise control
Fig . 91 Operating lever
Requ irement: The adaptive cruise cont ro l is
switched on .
Ove rriding cruise control
Overriding means exceeding the selected
speed when adaptive cruise control is act ive,
for example when press ing the accelerator
pedal when pass ing.
.. To acce lerate manually, pu ll the lever to­
ward you into position @and hold it there.
The message
ACC: ov errid e appears . Or
.. press the accelerator pedal.
.. To resume cruise contro l, re lease the lever
or take your foot off the accelerator pedal.
Interrupting crui se control while driving
.. Move the lever into position@. The mes­
sage
ACC: standby appears . Or

92 Audi adaptive cruise control
• press the brake peda l.
• To resume the stored speed, move the lever
i nto position @.
Interrupting cruise control when stopped
• Push the lever away from you into position
@. The message ACC : standby appears .
• To resume cru ise control, press the brake
pedal and pull the lever toward you into po­
sition @.
A WARNING
It is dangerous to activate cruise control
and resume the stored speed when the
current road, traffic or weather conditions
do not permit th is . Th is could result in a
crash .
Setting the distance
Applies to vehicles: wit h Audi adapt ive cru ise co ntrol
Fig. 92 Operat ing lever : Sett ing t he dist ance
-
• Tap the swit ch to display the current set dis­
t ance
¢f ig. 92.
• To increase or reduce the distance in incre­
ments, tap the switch again to the right or
left . The distance between the two vehicles
will change in the instrument cluster dis­
play.
When approaching an object detected ahead,
the adaptive cruise con trol system brakes to
match that object's speed and then reg ulates
to the stored distance . If the object detected
ahead acce lerates, adapt ive cruise control will
a lso acce lerate up to the stored speed .
The highe r the speed, the greater the distance
in meters
c::;, & . The Distance 3 setting is rec­
ommended. That is equal to the general rec- ommendation of "hal
f the speed shown on
the speedometer".
T he distances provided are example values.
Depending on the driv ing s ituation, the cur­
rent speed and the way the object detected
ahead is driving, the actual distance may be
more or less than these target distances.
o:::::::, _o:::::::, ___ Distance 1: This setting cor re-
sponds to a distance of 92 feet
I 28 meters
when traveling at 62 mph (100 km/h), or a
t ime distance of 1 second.
o:::::::, __ o:::::::, __ Distance 2: This setting corre ­
sponds to a distance o f 118 feet/ 36 meters
when traveling at 62 mph (100 km/h), or a
t ime distance of 1.3 seconds .
o:::::::, ___ o:::::::,_ Distan ce 3: Thi s sett ing corre-
sponds to a distance of 164 feet/ 50 meters
when traveling at 62 mph (100 km/h), or a
t ime distance of 1.8 seconds.
o:::::::, ____ o:::::::, Distance 4: Thi s sett ing corre-
sponds to a distance of 219 feet/ 67 meters
when traveling at 62 mph (100 km/h), or a
t ime distance of 2.4 seconds.
A WARNING
--
- Driving too close to other vehicles in­
creases the risk of collisions and ser ious
in jur ies.
- Sett ing short distances to vehicles ahead
reduces the distance and time that you
have to stop your vehicle safe ly . This in ­
creases the need for you to pay attention
to traffic.
- Always follow applicable traff ic laws , use
common sense and select a distance to
veh icles ahead that takes the current
traffic , road and weather conditions into
account.
{i) Tips
Distance 3
is set automatically each time
you switch the ignition on.
It you would
lik e to have this distance as a basic setting,
you can have the
adaptive cruise control
menu extended/ enabled from an author ­
ized repair facility .

104 Audi side assist
General information
A pplies to vehicles: with Audi side assist
®
®
©
Fig. 101 D riving s it u at ions
AU DI
F ig . 102 Rea r of th e ve hicle: pos it io n of t he se nso rs
(exa mple)
Side assist functions at speeds above approx i­
mately 19 mph (30 km/h).
@ Vehicle s that are approaching
In certain cases, a vehicle will be classifie d as
cr itica l for a lane change even if it is still
somewhat far away . The faster a vehicle ap­
proaches, the sooner the display in the e xteri ­
or mirror will tur n on .
@ Vehicle s traveling with you
Vehicles traveling w ith you a re indicated in the
exterior m irror if they are classified as cr itical
for a lane change. All vehicles detected by
side assist are indicated by the time they en­
ter your "blind spot", at the latest .
© Vehicles left behind
If you s low ly pass a ve hicl e th at sid e ass ist has
de te ct ed (t he difference in s peed be tween the
vehicle and you r vehi cle is less than 9 mph or
15 km/ h), the display i n the exterio r mirro r
turns on as soon as the ve hicle enters your
blind spot.
The disp lay wi ll not t urn on if you quickly pass
a ve hicle that s ide assist has detected (t he d if ­
f erence in speed between the ve hicle and your
vehicle is greater than 9 mph or 15 km/h).
Functional limitations
T he ra dar senso rs are designed to detect the
left and right adjacent lanes whe n the road
l anes a re the normal width. I n some sit ua ­
t ions, the d isp lay in the exterior mirror may
tu rn on even thoug h there is no ve hicle locat­
ed in the area that is cr itical fo r a la ne cha nge.
Fo r exampl e:
- If the lanes are nar row or if your a re dr iving
o n t he e dge of your lane. If this is the case ,
the system may have detected the vehicle in
another la ne that is
not adjacent to you r
cur rent lane .
- If you are dr iving th ro u gh a curve . S ide as­
sist may react to a vehicle that is one lane
over from the adj ace nt lane.
- If si de assist reacts to o ther objects (such as
h igh or d is pl ace d gua rd rails) .
- In poor weather conditions. The side assist
fu nctions are limited .
Do not cover the rada r senso rs
c::> fig. 102 with
stickers, depos its, bicycle w heels or other ob­
jects, because this wi ll affect the funct io n. Do
not use s ide ass ist when tow ing a trailer . For
information o n cleaning, r efe r to
c::> page 204 .
&_ WARNING
-Always pay attention to traffic and to the
ar ea arou nd your ve hicl e. Si de a ssis t ca n­
no t repla ce a driver's a tte ntion. The driv­
er a lo ne is always res pons ible fo r lane
ch ang es a nd similar driving ma ne uvers.

M N
" > co ,...., \!) ..,.,
,...., ..,., ,....,
-In some situations, the system may not
function or its function may be limited.
For example:
- If vehicles are approaching or being
left behind very quickly. The display
may not turn on in time.
- In poor weather conditions such as
heavy rain, snow or heavy mist.
- On very wide lanes, in tight curves, or if
there is a rise in the road surface.
Vehicles in the adjacent lane may not
be detected because they are outside
of the sensor range.
- Audi side assist cannot detect all vehicles
under all conditions, which can increase
the risk of accidents.
- Please note that side assist only displays approaching vehicles or vehicles in your
blind spot if your vehicle is traveling at
least 19 mph (30 km/h).
- In certain situations, the system may not
work or its function may be limited. For
example:
- The display may not turn on at the
right time if vehicles are approaching
or passing very quickly.
- In poor weather conditions, such as
heavy rain, snow or fog.
- In very wide lanes, in tight curves or
when there are slopes in the roadway,
vehicles in the neighboring lanes may not be detected because they are out­
side of the sensor range.
(D Note
The sensors can be displaced by impacts or damage to the bumper, wheel housing and
underbody. This can affect the system. Have an authorized Audi dealer or author­
ized Audi Service Facility check their func­
tion.
@ Tips
- If the window glass in the driver's door
or front passenger's door has been tint­
ed, the display in the exterior mirror may
be misinterpreted .
Audi side assist 105
-For an explanation on conformity with
the FCC regulations in the United States
and the Industry Canada regulations, re­
fer to
c> page 285.
Switching on and off
Applies to vehicles : wit h Audi s ide ass ist
The system and be switched on and off in the
MMI.
.,. Select: the
I MENU I button >Car> Systems*
control button > Driver assistance > Audi
side assist.
With Off , the system is switched
off.
An activated system will sig nal every time the
ignition is sw itched on by turning the displays
in the exterior mirrors on briefly.
' Adjusting the display brightness
App lies to vehicles : wit h Audi side ass ist
The display brightness can be adjusted in the
MMI.
.,. Select: the I MENU I button >Car> Systems*
control button > Driver assistance > Audi
side assist .
The display brightness adjusts automatically
to the brightness of the surroundings, both in
the information and in the warning stage. In
very dark or very bright surroundings, the dis­
play is already set to the minimum or maxi ­
mum level by the automatic adjustment . In
such cases, you may notice no change when
adjusting the brightness, or the change may
only be noticeable once the surroundings
change.
Adjust the brightness to a level where the dis­
play in the information stage will not disrupt
your view forward.
If you change the bright­
ness, the display in the exterior mirror will
briefly show the brightness leve l in the infor­
mation stage. The brightness of the warning
stage is linked to the brightness in the infor­
mation stage and is adjusted along with the
information stage adjustment .
IIJJ,,
•

M N
" > co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
A WARNING ,~
Heavy loads will influence the way your ve­
hicle handles. To help reduce the r isk of a
loss of control leading to ser ious personal
injury:
-Always keep in m ind when transporting
heavy objects, that a change in the cen­
ter of gravity can also cause changes in
vehicle handling:
- Always distr ibute the load as even ly as
possible.
- Place heavy objects as far forward in
the luggage compartment as poss ible.
- Never exceed the Gross Ax le Weight Rat­
ing or the Gross Vehicle Weight Rating
specified on the safety compliance stick­
er on the left do or jamb. Exceeding per­
missib le we ight standards can cause the
vehicle to s lide and handle differently.
- Please observe information on safe driv­
ing co
page 126.
A WARNING
To help prevent poisonous exhaust gas
from be ing drawn into the veh icle, always
keep the rea r lid closed while dr iving.
- Never transport objects larger than those fitting completely into the luggage
area because the rear lid cannot be fully
cl osed.
- If you absolutely must drive w ith the rear
l id ope n, observe the follow ing notes to
reduce the risk of poisoning:
- Close all windows,
- Close the power top,
- Open all air ou tlets in the instrument
panel,
- Sw itch off the air recircu lation,
- Set the fresh ai r fan to the h ighest
speed.
A WARNING
Alw ays m ake s ure th at the doors, all win­
dows, the power top an d the re ar lid are
securely closed and locked to reduce th e
Dri ving s afe ty 133
risk of injury when the vehicle is not being
used .
- After closing the rear lid, always make
sure that it is properly closed and loc ked.
- Never leave your vehicle unattended es­
pecially with the rear lid left open. A
child cou ld craw l into the vehicle thro ugh
the luggage compartment and close the
rea r lid becoming t rapped and unable to
get out. Being trapped in a vehicle can
lead to serious pe rsonal inj ury.
- Never let ch ildren play in or around the
veh icle.
- Never let passengers ride in the luggage
compa rtment. Vehicle occupants must
always be properly restra ined in one of
the vehicle's seating pos it ions.
(D Tips
- Air circulati on helps to reduce window
fogging . S tale a ir escapes to the outside
through ven ts in the t rim panel. Be sure
t o keep these slots free an d ope n.
- T he tire pressure m ust correspond to the
load. The tire pressure is shown on the
t ire pressure label. T he tire pressure la­
bel is located on the driver's side B-pilla r.
T he tire pressure label lists the recom­
mended co ld tire inflation pressures fo r
the vehicle at its maxim um capacity
weight and the tires that were on your
vehicle at the time it was manufactured.
For recommended tire pressures f or nor­
ma l load cond itions, p lease see chapter
co
page 235.
Tie-downs
The luggage compartment is equipped with
four tie-downs to secure luggage and other
items .
Use the t ie-downs to secure your cargo prop­
erly co
page 132, Loading the luggage com­
partment.
In a collision, the laws of physics mean th at
even smaller items that are loose in the vehi-
cle w ill become heavy m issiles that can cause .,.. •
•

158 Airbag sys te m
sudden maneuver . Objects near the
air bags can become projectiles and cause
injury, particularly when the s eat is re­
cli ned .
- Never place or transport objects on the
front passenger seat. Objects on the
front passenger seat could cause the ca­
pacitive senso r in the seat to s ignal to
airbag system that t he seat is occupied
by a person whe n it in fa ct is not, o r th at
the person on the sea t is he avie r than he
or s he actually is. The change in electric
capacitance because of such objects can
cause the passenger front airbag to be
t ur ned on when it sho uld be off, or can
cause the airbag to work in a way that is
different from the way it wou ld have
worked w ithout ob jects on the seat .
- Always make sure that there is nothing
on the front passenge r seat that will
cause the capaci tiv e passenge r detection
system in the s eat to s ignal to the A irbag
System that t he seat is occupied by a
perso n when it is not, or to sign al that it
is occupied by someone who is heavier
than the person actually sitting on the
seat . The prese nce of an o bject co uld
cause the passenger front a irbag to be
t u rned on when it sho uld be off, or co uld
cause the airbag to work in a way that is
differe nt from the way it wou ld have
worked w it h out the object on the sea t.
.&, WARNING
The fine dust created when a irbags deploy
can ca use b reathing problems for peop le
w ith a hi story of ast hma o r othe r brea th ­
ing conditions .
- T o redu ce the r is k of breathing p rob lems,
th ose w it h a sthma or o ther resp iratory
condit ions shoul d ge t fresh a ir right
away by gett ing out of the vehicle o r
opening windows or doo rs .
- If you are in a coll is ion in which a irbags
dep loy, wash yo ur hands and face w ith
mild soap and water befo re eating . -
Be ca reful not to get the dust into your
eyes, or into any c uts or scratches.
- If the res id ue s hould get into your eyes,
f lush them w ith wate r.
Monitoring the
Advanced Airbag
System
tli Airbag monitor ing indicator light
Two separate indicators monitor the function
of the Advanced Airbag System: the airbag
monitoring indicator light and the
PASSEN­
GER AIR BAG OFF
light.
The Advance d Airbag System as well as the
s ide airbags and side curta in a irbags w ith
eject ion mit igat ion features (including the
electron ic contro l unit, se nsors a nd system
wiring) are all mon itored continuously to
make su re that t hey are functioning p roperly
whenever the ignition is on. Eve ry time you
tu rn o n the ignition, the airbag sys tem indica ­
tor light II will come on fo r a few seconds
(funct ion check) .
The system must be inspected when the
indicator light
II:
- does not come on when the igni tion is
sw itched on,
- does not go out a few seconds after you
have switched on the igni tion, or
- comes on while driv ing .
If an airbag system malfunction is detected,
the indicator lig ht w ill first sta rt flashing to
catch t he d rive r's a ttent io n and the n stay on
c onti nuously to serve as a constant rem inder
to have the sys tem inspected immed iate ly.
If a malfunction occurs that tu rns the front
airbag on the passenge r side off, the
PASSEN ­
GER AIR BAG OFF
light will come on and stay
o n wheneve r th e ign ition is on.