weight AUDI A3 CABRIOLET 2016 User Guide

Child safet y
heed a ll of the app licab le WARN INGS. Make cer ­
tain that the child and child restraint are correct ­
ly recognized by the capacitive passenger detec­
tion system in the front passenger seat, that the
front passenger airbag is turned off, and that the
airbag status is always correctly signaled by the
PAS SENGER AIR BA G OFF light .
Many types and models of child restraints have
been available over the years, new models are in­
troduced regularly incorporat ing new and im ­
proved designs and older models are taken out of
p roduct ion. Ch ild restraints are not standardized.
Ch ild rest raints of the same type typ ica lly have
d ifferent weights and s izes and d ifferen t "foot­
p rints", the s ize and shape of the bottom of the
child restraint that sits on the seat, when they
are insta lled on a vehicle seat. These differences
make it virtually impossible to certify compliance
with the requirements for advanced airbags with
each and every ch ild restraint that has ever been
sold in the past or will be sold over the course of
the useful life of your veh icle.
For this reason, the Un ited States National High­
way Traffic Safety Administration has published a list of specific type, makes and models of child
restraints that must be used to cert ify compli­
ance of the Advanced Airbag System in your vehi­
cle with the supp ression requ irements of Federal
Motor Vehicle Safety Standa rd 208. These child
restraints are:
Subpart A - Car bed child restraints
Mod el Manufactured on or
after
Angel G uard Angel September 2S, 200 7
Ride AA2403 FOF
Subpart B - Rear-facing child re straints
Model Manufactured on or
after
Century SmartFit 4S43 December 1, 1999
Cosco Arriva September 2S, 2007
22-0 13PAW and base
22-999WHO
Evenflo Discovery Ad- December 1, 1999
just Right 212
1 6 8
Model Manufactured on or
after
Evenflo First Choice December 1, 1999
204
Graco Infan t 845 7 December 1, 1999
Graco Snugr ide September 2S, 2007
Peg Perego Primo Viag- September 25, 2007
gio SIP IMUNOOUS
Subpart C - Forward-facing and convertible
child re str aint s
Model Manufactured on or
after
Br itax Roundabout September 2S, 2007
E9L02xx
Cosco Touriva 025 19
December 1, 1999
Cosco Summit Deluxe September 2S, 2007 H igh Back Booster
22-262
Cosco High Back Boos- September 25, 2007
ter 22-209
E venflo Tribu te V September 25, 2007
379xxxx
Evenflo Medallion 2S4 December 1, 1999
Evenflo Generations September 25, 2007
352xxxx
Graco ComfortSport September 25, 2007
Graco Todd ler Safety
September 25, 2007
Seat Step 2
Graco Plat inum Cargo September 25, 200 7
_&. WARNING
To reduce the risk of serious injury, ma ke sure
that the
PASSENGER AIR BAG OFF light
comes on and stays on whenever a ch ild re­
stra int is installed on the front passenger seat
and the ign ition is switched on.
-Take the child restra int off the front passen­
ger seat and install it properly at one of the rear seat positions if the
PA SSENGER AIR
BAG OFF
light does not stay on.
- Have the airbag system inspected by your
author ized Audi dealer immed iately.

<( co .... N r--­N .... 0 r--­> co
@ Tips
The chi ld seats listed in categories A to C have
been statically tested by Audi only for the Ad­
vanced Airbag function .
Important safety instructions for using
child safety seats
Correct use of child safety seats substantially re­
duces the risk of injury in an accident!
As the driver, you are responsible for the safety
of everybody in the vehicle, especially children:
~ Always use the right child safety seat for each
child and a lways use it properly~
page 171.
~ Always carefully follow the child safety seat
manufacturer's instructions on how to route
the safety belt properly through the child safe­
ty seat .
~ When using the vehicle safety be lt to install a
child safety seat , you must first activate the
convertible locking retractor on the safety be lt
to prevent the child safety seat from moving
~ page 176.
~ Push the child safety seat down w ith your full
weight to get the safety be lt rea lly t ight so that
the seat cannot move forward or sideways more than one inch (2.5 cm).
~ Secure unused safety belts on the rear seat
~ page 171.
Always remember: Even though your vehicle is
equipped with an Advanced Airbag sys tem, all
children, especially those 12 years and younger,
should always ride in the back seat properly re­
stra ined for their age and size.
_&, WARNING
Not using a ch ild safety seat , using the wrong
child sa fety seat or improperly installing a
child restraint increases the risk of serious
personal injury and death.
- All vehicle occupants and especia lly children
must be restrained properly whenever riding
in a vehicle . An unrestrained or improperly
restrained child could be injured by striking
the interior or by being ejected from the ve­ hicle during a sudden maneuver or impact.
Ch ild safety
An unrestrained or improperly restrained
child is also at greater r isk of injury or death
through contact with an inf lating airbag.
- Commercially available child safety seats
are required to comply with U.S . Federal
Motor Vehicle Safety Standard (FMVSS) 213
(in Canada CMVSS 213) .
- When buying a child restra int, select one
that fits your child and the vehicle.
- Only use child restraint systems that fully
contact the flat portion of the seat cush­
ion . The child restraint must not tip or
lean to either side. Audi does not recom­
mend using child safety seats that rest on
legs or tube-like frames. They do not pro­
vide adequate contact with the seat.
- Always heed all lega l requirements per­
ta ining to the installation and use of child
safety seats and carefully follow the in­
structions provided by the manufacturer
of the seat you are using .
- Never allow children under 57 inches
(1.45 meters) to wear a normal safety belt .
They must always be restrained by a proper
child restraint system. Otherwise, they
could sustain injuries to the abdomen and
neck areas during sudden braking mane u­
vers or accidents.
- Never let more than one child occupy a chi ld
safety seat .
- Never let babies or o lder children ride in a
veh icle while sitting on the lap of another
passenger.
- Holding a child in your arms is never a sub­
stitute for a child restraint system .
- The strongest person cou ld not ho ld the
ch ild with the forces that exist in an acci­
dent . The child will strike the interior of
the vehicle and can also be struck by the passenger.
- The child and the passenger can also in­
jure each other in an accident.
- Never install rear-fac ing child safety seats
or infant car riers on the front passenger
seat. A child w ill be seriously injured and
can be killed when the passenger a irbag in­
flates -even with an Advanced Airbag Sys­
tem .
169

<( co .... N
" N ..... 0
" > 00
Secure unused safety belts on the rear seat
-------~
Fig. 1 45 Schematic overv iew : keep unused safety belts
away from ch ildre n in ch ild safety seats .@ -outer rear
safety belt
::!
If a child safety seat is used on the rear bench,
especially with LATCH universal lower anchorag­
es, the unused safety belts
mu st be secured so
that the child in the ch ild restraint cannot reach
them
9 &, .
-Guide the safety belt webb ing @ behind the
head restraint of the seat where the child re­
straint is installed
<=:> fig. 145. When do ing so,
do not engage the convertible locking ret rac­
tor! You sho uld not hear a "clicking" sound
when winding up the safety belt.
- Let the belt retractor wind up the safety be lt
webbing .
_& WARNING
A child in a child safety seat installed with the
LA TCH lower anchorages or wit h the standard
safety belt or a child in a booster seat on the
rear seat could play with unused rear seat
safety belts and become entangled. This
cou ld cause the ch ild ser ious personal in jury
and even death .
- Always secure unused rear seat safety belts
out of reach of ch ildren in child seats such
as by properly routing them around the
head restraint of the seat where the child
restra int is ins tal led.
- Never act ivate the convertible locki ng re­
t racto r when routing the safety belts around
the head restra ints.
Ch ild sa fety
Child seats
Infant seats
Babies and infants up to about one year old and
20 lbs. or
9 kg need special rearward-facing
child restraints that support the back, neck and
head in a crash.
F ig . 14 6 Schematic overv iew: rearward -fac ing infant seat,
p roperly insta lled on the rea r seat
.,. When using the vehicle safety belt to install a
child safety seat, you must first activate the
convertib le loc king re tractor on the safety belt
to p revent the chi ld safety seat from moving
9 page 176 or insta ll the seat using the LATCH
attachments.
... Push the child safety seat down with your full
weight to get the safety belt really tight so that
the seat cannot move forward or sideways
more than one inch (2.5 cm) .
.,. Secure unused safety belts on the rear seat
<=:>page 171.
Infants up to about one year (20 lbs. or 9 kg) are
best protected in special infant carr iers and child
safety seats designed for the ir age group. Many
experts be lieve that infants and small ch ildren
sho uld ride o nly in special res tra ints in wh ich the
ch ild faces the back of the vehicle. These infant
seats support the baby's back, neck and head in a
c rash
r:::;, fig. 146 .
The airbag on the passenger s ide makes the fron t
seat a potent ially dangerous place for a child to
ride . The front seat is not the safest place for a
c h ild in a forward-facing child seat. It is a very
dangerous p lace for an infant or a larger child in
a rearward-facing seat.
171

Child safety
_& WARNING
Not using a child safety seat, using the wrong
child safety seat or improperly install ing a
child restra int increases the risk of serious
personal injury and death in a crash.
- Never install rear-facing child safety seats or infant carr iers on the front passenger
seat -
even with an Advanced Airbag System.
A chi ld will be seriously injured and can be
k illed when the inflating airbag hits the
child safety seat or infant carrier with great
force and smashes the child safety seat and
child against the backrest, door or roof
c> page 144, Child restraints on the front
seat -some important things to know.
-Always install rear-facing child safety seats
or infant carr iers on the rear seat.
- Never install a rear-facing child restraint in
the forward-facing direction. Such restraints are designed for the special needs of infants
and
very small children and cannot protect
them properly if the seat is forward-facing.
- If you must install a rearward fac ing ch ild
safety seat on the front passenger seat be­ cause of exceptional circumstances and the
PASSENGER AIR BAG OFF light does not
come on and stay on, immed iate ly install
the rear-fa cing ch ild safety seat in a rear
seating position and have the airbag systetn inspected by your Audi dealer.
- Never place or use any electrical device
(such as a laptop, CD player, electronic
games device, power inverter or seat heater
for child seats) on the front passenger seat if the device is connected to the 12-volt
socket or the cigarette lighter socket.
- If a seat heater has been retrofitted or oth­
erwise added to the front passenger seat,
never install any ch ild restraint system on
this seat .
- Make sure that there are no wet objects
(such as a wet towel) and no water or other
liquids on the front passenge r seat cushion .
- Never place objects on the seat (such as a
laptop, CD player, elect ronic games dev ice,
power inverter or seat heater for child
seats). These may influence the e lectr ica l
172
capacitance measured by the capacitive pas­
senger detect ion system and can also fly
around in an accident and cause serious per­
sonal injury .
- Always read and heed all WARNINGS when­
ever us ing a child restrained in a vehicle is
being used.:.>
page 135, Safety belts,
r:=;,page 143, Airbag system
and
.:.> page 165, Important information.
Convertible child safety seats
Properly used convertible child safety seats can
help protect toddlers and children over age one
who weigh between 20 and 40 lbs. (9 and 18 kg)
in a crash .
Fig. 147 Schema tic ove,v iew: installat ion of t he attach­
me nts applicable to a LA TCH seat
Fig. 148 Schematic oveiview : installat ion of th e seat using
the vehicle's sa fety belt system
.,. When using the vehicle safety belt to install a
child safety seat, you must first activate the
convertible locking retractor on the safety belt
to prevent the child safety seat from moving
¢page 176 or install the seat using the LATCH
attachments .
.,. Push the ch ild safety seat down with you r full
weight to get the safety belt really tight so that .,..

<( co .... N ,.__
N .... 0 ,.__
> co
the seat cannot move forward or sideways more than one inch (2.5 cm)
c::!;> page 176.
~ If the child safety seat is equ ipped with a tether
strap, attach it to the tether anchors
<=> page 181.
~ Secure unused safety belts on the rear seat
<=> page 171.
A toddler or child is usually too large for an in­
fant restraint if it is more than one year old and
weighs more than 20 lbs. (9 kg) .
T oddlers and children who are o lder than one
year up to about 4 years old and weigh more than
20 lbs (9 kg) up to 40 lbs. (18 kg) must always be properly restrained in a ch ild safety seat cert ified
for the ir s ize and weight <=>
fig. 147 and
¢ fig. 148 .
The airbag on the passenger side makes the front
seat a potentially dangerous place for a child to
ride . The front seat is not the safest place for a
child in a fo rward-facing child safety seat. It is a
ve ry dangero us p lace for an infant or a larger
chi ld in a rearward-facing seat.
_.6 WARNING
-Not using a ch ild safety seat, using the wrong
child safety seat or improper ly installing a
child restraint increases the risk of serious
personal injury and death in a collis ion or oth­
er emergency situation.
- Children on the front seat of any car, even
with Advanced Airbags, can be seriously in­
jured or even killed when an airbag inf lates.
A ch ild in a rearward-facing child safety seat
installed on the front passenger seat will be
seriously injured and can be killed if the
front airbag inflates - even with an Ad­
vanced Airbag System.
- T he inflating a irbag w ill hit the child safety
seat or infant carrier with great force and
will smash the chi ld safety seat and chi ld
against the backrest, center arm rest, door
or roof.
- Always install rear-facing child safety seats
on the rear seat.
- If you must install a rearward fac ing ch ild
safety seat on the front passenger seat be-
Ch ild safety
cause of exceptional circumstances and the
PASS ENGER AIR BA G OFF light does not
come on and stay on, immediately install
the rear-facing child safety seat in a rear
seating position and have the a irbag system
inspected by your Audi dealer.
- The rear side of the ch ild safety seat should
be positioned as close as possible to the
backrest on the veh icle seat.
- For adjustable head restraints: adjust or re­
move the rear seat head rest raint if it is dif­
ficult to insta ll the ch ild seat with the head
restraint in place¢
page 55. Install the
head res traint again immed iate ly once the
child seat is removed. Driving witho ut head
restraints or with head restraints that are
not properly ad justed increases the r isk of
serious or fatal neck injury dramatically.
- Always read and heed all WARNINGS when­
ever using a child restrained in a vehicle is
be ing used ¢
page 135, Safety belts,
<=> page 143, Airbag system
and
<=> page 165, Important information.
A WARNING
-
If exceptional c ircumstances requ ire the use
of a forward-facing ch ild restraint on the
front passenger's seat, the child 's safety and
well-being req uire that the following special
precautions be taken:
- Make sure the forward-fac ing seat has been
des igned and certified by its manufacturer
for use on a front seat with a passenger
front and side ai rbag .
- Always follow the manufacturer's instr uc­
tions provided with the child safety seat o r
infant carrier.
- Always move the front passenger seat to
the highest position in the up and down ad­
justment range and move it back to the rearmost posit ion in the seat's fore and aft
adjustment range, as far away from the a ir­
bag as possible, before install ing the for­
ward-facing ch ild restraint .
- Always make sure that the safety be lt upper
anchorage is behind the ch ild restraint and
not next to o r in front of the child restraint
~
173

Child safety
so that the safety belt will be properly
pos it ioned.
- Always make sure that nothing prevents the
front passenger's seat from being moved to
the rearmost position in its fore and aft ad­
justment range.
- Always make sure the backrest is in an up­
right position.
- Never place or use any electrical device
(such as a laptop, CO player, electronic
games device, power inverter or seat heater
for child seats) on the front passenger seat
if the device is connected to the 12-volt
socket or the cigarette lighter socket.
- If a seat heater has been retrofitted or oth­
erwise added to the front passenger seat,
never install any ch ild rest raint system on
t h is seat.
- Make s ure that the re a re no wet objects
(s uch as a wet towe l) and no water or other
liquids o n the front passenger seat cushion.
- Never place objects on the seat (such as a
laptop, CD player, electronic games dev ice,
power inverter or se at heater for child
seats) . These may influence the e lectrica l
capacitance measured by the capacitive pas­
senger detection system and can also fly
around in an accident and cause serious per­
sonal injury.
- Make sure that the
PASSENGER AIR BAG
OFF
light comes on and stays on all the time
whenever the ignition is switched on.
- If the
PAS SENGER AIR BAG OFF light does
not come on and stay on, immediately in­
stall the forward-facing child seat at a seat­ ing posit ion on the rear seat and have the
airbag system inspected by your author ized
Audi dealer.
- T ake the ch ild restraint off the front passen­
ger seat and insta ll it p roperly at one of the
rea r seat positions if the
PASSENGER AIR
BAG OFF
l ight does not stay on whenever
the ignition is switched on.
174
Booster seats and safety belts
Properly used booster seats can help protect
children weighing between about 40 lbs . and 80
lbs. (18 kg and 36 kg) who are less than 4
ft. 9
in . (57 inches/1.45 meters) tall.
Fi g. 1 49 Rear seat: ch ild prope rly restra ined in a booster
seat
The vehicle's safety belts a lone w ill not fit most
ch ild ren until they are at leas t 4 ft. 9 in. (57 in­
ches/1.45 meters) tall and weigh about 80 lbs. (36 kg) . Booste r seats raise these ch ildren up so
that the sa fety belt will pass p roper ly over the
stronger parts of their bodies and the safety be lt
can help protect them in a crash.
.,. Do not use the convertib le locking re trac tor
when using the veh icle's safety be lt to restrain
a child on a booster seat.
.,. The shoulder belt must lie as close to the cen­
ter of the child's collar bone as possible and
must lie flat and snug on the upper body. It
must never lie across the throat or neck . The
lap belt m ust lie across the pelvis and never
across the stomach or abdomen . Make sure the
belt lies flat and sn ug. Pu ll on the be lt to tight­
en if necessary.
.,. Secure unused safety belts on the rear seat
c>page 171.
Children up to at least 8 years o ld (over 40 lbs or
18 kg) a re best protected in child safety seats de­
signed for their age and weight . Experts say that
the skeletal structure, part icu larly the pelvis, of
these ch ildren is not fully developed, and they
must not use the vehicle safety belts without a
su itable child restraint.

Child safety
your vehicle. To activate the convertible locking
retractor:
.,. Place the child restraint on a seat, preferably
on the rear seat.
.,. Slowly pull the belt
all the way out.
.,. Route it around or through the child restraint
belt path
~ .&_ .
.,. Push the child safety seat down with your full
weight to get the safety belt really tight .
.,. Insert the belt tongue into the buckle for that
seating position .
.,. Guide the safety belt back into the retractor un­
til the belt lies flat and snug on the child safety
seat.
.,. You should hear a "clicking" noise as the belt
winds back into the inertia reel. Test the con­
vertible locking retractor by pulling on the belt.
You should no longer be able to pull the belt
out of the retractor. The convertible locking re­
tractor is now activated.
.,. Make sure that the red release button is facing
away from the child restraint so that it can be
unbuckled quickly.
.,. Pull on the belt to make sure the safety belt is
properly tight and fastened so that the seat
cannot move forward or sideways more than
one inch (2.5 cm).
A WARNING
Using the wrong child restraint or an improp­
erly installed child restraint can cause serious
personal injury or death in a crash.
- Always make sure that the safety belt re­ tractor is locked when installing a child
safety seat. An unlocked safety belt retrac­
tor cannot hold the child safety seat in place during normal driving or in a crash.
- Always buckle the child safety seat firmly in
place even if a child is not sitting in it . A
loose child safety seat can fly around during
a sudden stop or in a crash.
- Always make sure the seat backrest to which
the child restraint is installed is in an up­
right position and securely latched into
place and cannot fold forward. Otherwise,
the seatback with the child safety seat at-
178
tached to it could fly forward in the event of
an accident or other emergency situation .
- Always read and heed all WARNINGS when­
ever using a child restrained in a vehicle is
being used
¢page 165. Special precautions
apply when installing a child safety seat on
the front passenger seat¢
page 144, Child
restraints on the front seat -some impor­
tant things to know.
Deactivating the convertible locking
retractor
The convertible locking retractor for child re­
straints will be deactivated automatically when the belt is wound all the way back into the re­
tractor.
.,. Press the red button on the safety belt buckle.
The belt tongue will pop out of the buckle.
.,. Guide the safety belt all the way back into its
stowed position.
Always let the safety belt retract completely into
its stowed position. The safety belt can now be
used as an ordinary safety belt without the con­
vertible locking retractor for child restraints.
If the convertible locking retractor should be ac­
tivated inadvertently, the safety belt must be un­
fastened and guided completely back into its
stowed position to deactivate this feature. If the
convertible locking retractor is not deactivated,
the safety belt will gradually become tighter and
uncomfortable to wear.
A WARNING
Improperly installed child safety seats in­
crease the risk of serious personal injury and
death in a collision .
- Never unfasten the safety belt to deactivate the convertible locking retractor for child re­
straints while the vehicle is moving. You
would not be restrained and could be seri­
ously injured in an accident.
- Always read and heed all WARNINGS when­
ever using a child restrained in a vehicle is
being used ¢
page 165. Special precautions
apply when installing a child safety seat on
Ill>

Tires and wheels
be happy to provide more infor­
mation .
® Mud and snow capability
"M/S" or "M+S" indicates the tire
is suitable for driving on mud and
snow.
& indicates a winter tire.
@ Compos ition of the tire cord
and materials
The number of plies indicates the
number of rubberized fabric lay­
ers in the tire . In general: the
more layers, the more weight a
tire can carry. Tire manufacturers
must also specify the materia ls
used in the tire. These include
steel , nylon, polyester and other
materials.
@ Ma ximum permitted load
T his number indicates the maxi­
mum load in kilograms and
pounds that the tire can carry.
@ Uniform tire quality grade
standards for treadwear,
traction and temperature resistance
Tread wear, t raction and temper­
ature ranges
¢page 221 .
@ Running direction
The arrows indicate the running
direction of unidirectional t ires.
You must always follow the speci -
206
fied running direction
¢page 238 .
(8) Maximum permitted
inflation pressure
This number indicates the maxi­
mum pressure to which a t ire can
be inflated under normal operat­
ing condit ions.
Glossary of tire and loading
terminology
Accessory we ight
means the combined weigh t (in
excess of those standard items
which may be replaced) of auto­ matic transmission, power steer­
ing, power brakes, power win­
dows, power seats , radio, and
heater, to the extent that these
items are available as factory -in ­
stalled equipment (whether in­
stalled or not).
Aspect ratio
means the rat io of the height to
the width of the tire in pe rcent.
Numbers of 55 or lower indicate a
low s idewall for imp roved steer­
ing response and better overa ll
handling on dry pavement.

Bead
means the part of the tire that is
made of steel wires, wrapped or
reinforced by ply cords and that is
shaped to fit the rim.
Bead separation
means a breakdown of the bond
between components in the bead.
Cord
means the strands forming the
plies in the tire.
Cold tire inflation pressure
means the tire pressure recom­
mended by the vehicle manufac­
turer for a tire of a designated size that has not been driven for
more than a couple of miles (kilo­
meters) at low speeds in the
three hour period before the tire pressure is measured or adjusted .
Curb weight
means the weight of a motor ve­
hicle with standard equipment in­
c luding the maximum capacity of
fuel, oi l, and coolant, air condi­
tioning and add itional weight of
optional equipment.
E xtra load ti re
<( a:,
~ means a tire designed to operate
N
~ at higher loads and at higher in ­
s: a:,
Tires and wheels
flation pressures than the corre­
sponding standard tire . Extra load
tires may be identified as "XL",
" xl", "EXTRA LOAD", or "RF" on
the sidewall.
Gross Axle Weight Rating ( " GAWR")
means the load -carrying capacity
of a single axle system, measured
at the tire-ground interfaces .
Gross Vehicle Weight Rating
("GVWR ")
means the max imum total loaded
weight of the vehicle.
Groove
means the space between two ad­
jacent tread ribs .
Load rating (code)
means the maximum load tha t a
tire is rated to carry for a given in­
flat ion pressure . You may not find
this informat ion on all tires be­
cause it is not requ ired by law.
Maximum load rating
means the load rating for a tire at
the maximum permissible infla­
tion pressure for that tire.
Maximum loaded vehicle
weight
means the sum of:
2 0 7
..

Tires and wheels
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight, and
(d) Production options weight
Ma ximum (permissible )
inflation pressur e
means the maximum cold infla­
tion pressure to which a tire may be inflated. Also called "maxi­
mum inflation pressure ."
Normal occupant weight
means 150 lbs . (68 kilograms)
times the number of occupants
seated in the vehicle up to the to­
ta l seating capacity of your vehi­
c le .
Occupant d istribution
means distribution of occupants
in a vehic le .
Outer diameter
means the overall diameter of an
inflated new tire.
Overall width
means the l inear distance be ­
tween the exteriors of the side­
walls of an inflated tire , including
elevations due to labeling , deco ­
rations, or protective bands or
ribs .
208
Ply
means a layer of rubber -coated
parallel cords.
Production options weight
means the comb ined weight of
those installed regular production
options weighing over 5 lbs . (2 .3
kg) in excess of those standard
items which they replace, not pre­
vio usly considered in c urb weight
or accessory weight, inc luding
heavy duty brakes, ride levelers,
roof rack, heavy duty ba ttery, and
special trim.
Radial ply tire
means a pneumatic tire in which
the ply cords that extend to the beads are laid at subs tantially 90
degrees to the centerline of the
tread .
Recommended inflation
pressure
see~ page 207, Cold tire infla­
tion pressure.
Reinforced tire
means a tire designe d to operate
at higher loads and at higher in­
flat ion pressures than the corre­
spond ing standard tire . Rein­
forced tires may be identified as .,.