clock AUDI A3 SEDAN 2018 Owners Manual

Opening and closing
Luggage compartment lid emergency
unlocking from the inside
Applies to: vehicles with emergency release from ins ide
The luggage comportment lid con be released
from the inside in on emergency.
-
Applies to: version 1
Fig. 25 Section of the luggage compartment : access to the
emergency release
Applies to: version
2
Fig. 26 Section of the luggage compartm ent: access to the
emergency release
Applies to: vehicles with emergency release from
the o utside: note the information
in¢ page 38,
Luggage comportment lid emergency unlocking
from the outside.
Applies to: vers ion 1
.,. Fold the backrest on the rear bench seat for­
ward
¢ page 65 .
.,. Pry off the cover using the key bit on the
opened vehicle
k ey (!) ¢ fig. 25 .
.,. Insert the key in the opening behind the cover
@ and press the key in the direction of the ar­
row until the lock releases.
Applies to: ve rs ion 2
• Fo ld the backrest on the rear bench seat for­
ward ¢
page 65.
38
.,. Remove the screwdriver from the vehicle tool
kit ¢
page 360. Use the flat side of the reversi­
ble screwdriver blade.
.,. Use the screwdr iver to pry the cover off @
¢fig. 26.
.,. Insert the key in the opening behind the cover
@ and press the key in the direction of the ar­
row until the lock releases .
Luggage compartment lid emergency
unlocking from the outside
Applies to: vehicles with emergency release from outside
Fig. 27 Luggage compartment lid: emergency release lock
cylinder
.,. Insert the key into the lock cylinder near the
handle .
.,. Turn the key counterclockwise.

LL co ..... N
" N ..... 0 N > co
"' Pull the release loop down from the rear to re­
lease the power top storage compartment lid
c:>fig. 38.
"'Slide the covers on both sides of the vehicle in
the direction of the arrow until they lock in
place
c:> fig. 39.
Step 2: Lift the power top storage
compartment lid out
Applies to: vehicles with power top
Fig. 40 Lift ing t he powe r top sto rage compa rtment L id out
and setting up the supports
Fig. 41 Power top s torag e com pa rtm ent lid : suppor ts se t
u p
"' Raise the power top storage compartment lid
out of the powe r top compartment and hold it
in
place @ c:> fig. 40 c:> A in General informa­
tion on page 46.
"'Secure the power top storage compa rtment lid
by pressing on the side suppo rts on both
sides @.
A WARNING
-Always make sure that the side supports on
the open power top storage compartment lid are in place, even when the power top is
not fully open or closed . Otherwise, the
Power top
power top storage compartment lid could
fall, which increases the r isk of an accident.
- Avoid touching the support rods and other
moving parts when opening the power top
storage compartment lid . If do you make
contact, your hands could be pinched.
Step 3: Open the locking pin
Applies to: vehicles with power top
Fig. 42 Rear of th e vehicle : open ing the lock ing p in
"' Remove the cap on the trip and insert the
wheel wrench into the opening .
"'Turn the wheel wrench clockwise until it stops
to open the locking pin.
"' Remove the wheel wrench .
47

Power top
Step 4: Close the power top
Applies to: ve hicles w ith power top
Fig . 43 Rear of vehicle: closing the power top (1)
Fig. 44 Rear of vehicle: clos ing the power top (2)
• Position yourself near the vehicle .
• Hold the power top by its front edge and pull it
out
completely ¢ fig. 43 ¢&. in General infor­
mation on page 46.
• Lift the rear edge of the power top.
• Release the power top storage compartment
lid by pulling on the side supports to release
them.
• Close the power top storage compartment
lid(!) and let the rear edge of the power top
drop@¢fig. 44.
Step 5: Lock the power top
Appl ies to: ve hicles w ith power top
Fig. 45 Windshield: closing the powe r top
48
Fig. 46 Inside of the power top: locking the power top
• Press the power top onto the windshield frame
¢ fig. 45 ¢&. in General information on
page 46.
• Insert the wheel wrench into the opening and
turn it counterclockwise until it stops
¢ fig. 46.
• Remove the wheel wrench and seal the opening
with the cap.
• Put the wheel wrench back into the vehicle tool
kit.
_& WARNING
- When positioning the power top, avoid con­
tact with the supports or other moving
parts. Otherwise you could pinch your
hands.
- When pressing the power top down onto
the windshield frame, make sure that you do not pinch yourself or anyone else.
(D Tips
Make sure the locking mechanisms are locked
securely.

-Always hold the steering whee l with your
hands in the 9 o'clock and 3 o'clock posi­
tions to reduce the risk of injury if the airbag
deploys.
- Never hold the steer ing wheel in the 12
o'clock position or with both hands on the
rim or the center of the steer ing wheel.
Holding the steering wheel incorrectly s ig­
nificantly increases the risk of in jury to the
hands, arms and head if t he a irbag dep loys.
Starting and stopping
the engine (vehicles with an ignition lock)
Starting the engine
A pp lies to: ve hicles with ignitio n lock
The ignition is switched on and the engine start­
ed with the key in the ignition .
Fig. 84 Ignit io n lock: posit io n of the ignit io n key
Switching the ignition on /off
• To switch the ign ition on, turn the ign ition key
to posit io n
CI) . Vehicles without the Start/Stop
system*: the needle in the tachometer moves
into the
READY position.
• To switch the ign ition off, turn the ignit io n key
to posit ion @. The needle in the tachometer
moves into the
OFF position .
Starting the engine
• Press the brake pedal and move the se lector
lever to the "P" or "N" position.
• Turn the key briefly to position @. The ignition
~ key automatically returns to position CI) . Do not
~ press the acce lerato r pedal when doing this .
N ..... 0 N > co
Drivi ng
Equipment that uses a lot of e lectricity is switch­
ed off temporarily when you start the engine .
If the engi ne does not start immediately , stop
the starting p rocedure by turning the ign it ion key
to posit ion @ and repeat after 30 seconds .
Start/Stop system*
See the information in Q page 79 , Start/Stop
system.
_&. WARNING
- T o redu ce the r is k of po iso ning, never allow
t he engi ne to run in confined sp aces.
- Never remove the ignition key from the ig ni­
t ion lock while the vehicle is moving. Other ­
wise the steer ing lock will engage and yo u
will not be ab le to steer the vehicle, which
increased the risk of an acc ident.
(D Note
Avo id high engine s peed, fu ll th rottle, and
heavy engine load i f th e e ngine has not
reached operating temperat ure yet . You could
damage the eng ine .
@ For the sake of the environment
Do not let the engine run w hile parked to
warm up. Beg in driving immediate ly . Th is re­
d uces unnecessary emissions.
@ Tips
- If it is d ifficult to turn the key to pos ition
CI) , turn the steering wheel back and forth
slightly to release t he steering whee l lock .
- S ome noise after start ing the e ngine is no r­
ma l and is no cause for co ncern.
Stopping the engine
Applies to: vehicles wi th ignition lock
Stopping the engine
• Bring the vehicle to a full stop .
• Turn the key to position @. The needle in the
tachometer moves into the
OFF pos ition.
Engaging the steering lock
Requireme nt: the se lector lever must be in P .
75

u. 00 .-< N l'­ N .-< 0 N > 00
System settings
Setting the date and
time
You can set the clock time manually or using the
CPS* .
.. Select : IMENUI button> Settings> left control
button >
MMI settings > Date & time.
.. Or : select : IMENUI button> Vehicle> left con-
trol button >
Vehicle settings > Date & time .
Automatic setting
When this function is switched on g, the time
and date are automatically set.
Time
Requirement: the Automatic setting must be
switched
off .
Press the control knob. You can set the Time
manually by turning and pressing the control
knob.
Date
Requirement: the Automatic setting must be
switched
off.
Press the control knob . You can set the Date
manually by turning and press ing the control
knob.
Time zone
When selecting the appropriate time zone, a
sampling of countries in this zone will be listed .
Automatic time zone*
When this function is switched on g, the time
will automatically adjust to the corresponding
time zone.
Automatic daylight saving time*
When this function is switched on g, the time
will automatically switch to daylight saving time .
Time format
If you select 24h, the clock will display, for ex­
ample,
13:00 . If you select AM/PM , the clock
will disp lay, for examp le,
1:00 PM .
System settings
Date format
If you select DD.MM.YYYY , the date display will
show, for example ,
31.08.2017. If you select
MM/DD/YYYY , the date display will show, for ex­
amp le,
08/31/2017. If you select YYYY-MM­
DD ,
the date display will show, for example,
2017-08-31 .
MMI settings
.. Select: !MENU I button> Settings> left control
button >
MMI settings .
Language
You can change the display language as well as
the language for the voice guidance* and voice
recognition system*.
T he number of languages available depends on
the market.
Measurement units
The following measurement units can be set de­
pend ing on availability:
Speed , Distance , Tem­
perature , Fuel consumption , Volume , Pressure.
Tool tips
When this funct ion is switched on g, your MMI
shows you tips for input . The frequency of how
often it displays decreases with time.
Speech dialog system
Applies to : vehicles wit h voice recog nitio n system
Depend ing on veh icle equipment, the following
funct ions may be ava ilable:
Command display : when this function is switch ­
ed on
g, the MMI will show you the possible
commands for voice input in the respective
menu.
Short dialog : when this function is switched on
g, a shorter form of the prompts is used .
Command during voice output*: thi s function is
switched on at the factory . W hen this function is
switched on
g, you can say new commands dur-
ing announcements. You do not need to wait for
the signal tone (beep) dur ing an announcement.
When the funct ion is swi tched off
0, you need to Iii>
243

Driving sa fety
,.. ALWAYS adjust your speed to road, traffic and
weather conditions.
,.. Take frequent breaks on long trips. Do not drive
for more than two hours at a stretch.
,.. Do NOT drive when you are tired, under pres­
sure or whe n you are stressed .
A WARNING
Impaired driv ing safety inc reases the risk of
ser ious persona l inju ry and death whenever a
vehicle is being used.
Correct passenger
seating positions
Proper seating position for the driver
The proper driver sea ting po sition is impor tan t
for safe, relaxed driving .
Fig. 217 Correc t seat ing posit ion
F or your own safety and to reduce the risk of in­
jury in the event of an accident, we recommend
that you adjust the driver 's seat to the following
position :
,.. Adjust the dr iver's seat so tha t you can easily
push the pedals all the way to the floor whi le
keeping your knee(s) s light ly
bent ¢ ,A.
,.. Adjust the angle of the seatback so that it is in
an upright position so that your back comes in
full contact with it when you drive.
,.. Adjust the steering wheel so that there is a dis­
tance of at least 10 inches (25 cm ) between the
stee ring wheel and your breast bone
<=;> fig . 217 .
If not possib le, see you r autho rized Aud i dea l­
ersh ip about adaptive equipment .
250
,.. Adjust the steering wheel so that the steering
wh eel and airbag cover points at your chest and
not at your face.
,.. Grasp the top of the steering wheel with your
elbow(s) slightly bent.
,.. F or ad justab le head rest raints: Adjust the head
restraint so t he upper edge is as even as possi­
ble with the top of your head . If that is not pos­
sible, t ry to adjust the head restraint so tha t it
is a s close to this pos it ion as poss ible . M ove the
he ad restraint so tha t it is as close to the back
o f the head as possible.
,.. Fasten and wear safety belts correctly
q page264 .
,.. Always keep both feet in the footwell so that
you are in contro l of the veh icle at all times .
Fo r detail ed information on how to adjust the
dr iver's seat,
see ¢ page 59.
A WARNING
Drivers who are unbelted , out of position or
too close to the airbag can be seriously in-
jured by an airbag as it unfo lds . To help re-
duce the risk of serio us pe rsonal i njury:
-Always adjust the driver's seat and the steer ing whee l so that there are at least
10 inches (25 cm) between you r breastbone
and the steering wheel.
- Always ad just the driver's seat and the
steer ing whee l so that the re are at least
4 inch es (10 cm) between the knees a nd the
lower part of the ins trumen t panel.
-Always hold t he s teering wheel on the out­
side of t he steering wheel r im with yo ur
hands at the 9 o'clock and 3 o'clock posi­
tions to help reduce the risk of personal in­
jury if the dr iver 's airbag inflates.
-Never hold the stee ring wheel at the
12 o'clock position or with you r hands at
other positions inside the steer ing whee l
rim o r on the steering wheel hub. Holding
the steering wheel the wrong way can cause
serious injuries to the hands, arms and head
-
if the driver's airbag inflates . .,_

LL co ..... N
" N ..... 0 N > co
-An improper ly installed child restraint can
interfere with the airbag as it deploys and
seriously injure or even kill the child
-even
with an Advanced Airbag System.
- Always carefully follow the manufacturer's
instructions provided with the child seat or
carrier .
- Always make sure that there is nothing on
the front passenger seat that will cause the capacit ive passenger detection system in
the seat to signal to the Airbag System that
the seat is occupied by a person when it is
not, or to signal that it is occupied by some­
one who is heavier than the person actually
sitting on the seat. The presence of addi­
tional objects could cause the passenger
front airbag to be turned on when it should be off, or could cause the airbag to work in a
way that is different from the way it would have worked without the object on the seat .
Front airbags
Description of front airbags
The airbag system can provide supplemental
protection to properly restrained front seat occu­
pants.
Fig. 236 Loc ation of driver a irbag: in ste .e ring wheel
Airbag system
Fig. 237 Location of front passenger's airbag: in the in­
st rum ent panel
Your vehicle is equipped with an "Advanced Air­
bag System" in compliance with United States
Federal Motor Vehicle Safety Standard
(FMVSS) 208, as well as Canada Motor Vehicle
Safety Standard (CMVSS) 208 as applicable at
the time your veh icle was manufactured.
The airbag for the driver is in the steering wheel
hub
¢ fig. 236 and the airbag for the front pas­
senger is in the instrument panel
¢fig . 237. The
general location of the airbags is marked "AIR­
BAG ".
There is a lot you need to know about the airbags
in your vehicle . We urge you to read the detailed
information about airbags, safety belts and child
safety in this and the other chapters that make
up the owner's literature. Please be sure to heed
the WARNINGS
-they are extremely important
for your safety and the safety of your passengers,
especially infants and small children.
_& WARNING
-Never rely on airbags alone for protection .
- Even when they deploy, airbags provide only
supplemental protection.
- Airbag work most effectively when used
with properly worn safety belts.
- Therefore, always wear your safety belts and
make sure that everybody in your vehicle is
properly restrained.
- Always hold the steering wheel with both
hands on the outside of the steering wheel
rim at the 9:00 o'clock and 3:00 o'clock po­
sitions to help reduce the risk of personal in-
jury if the driver's airbag inflates.
..,.
273

Airbag syste m
-Never hold the steering whee l at the 12
o'clock pos it ion or w ith your han ds any­
where inside the steering wheel or on the steering wheel hub. Holding t he steering
wheel the wrong way increases the risk of severe injury to the arms, hands, and head if
the d river a irbag deploys.
A WARNING
Objects between you and the a irbag w il l in­
crease the risk of inj ury in a crash by interfer­
ing w ith the way the airbag unfo lds and/or by
being pushed into you as the airbag inflates .
- Always make sure nothing is in the front air-
bag deployment zone that could be str uck
by the airbag when it inflates.
-
- Objects in the zone of a deploying airbag
can become projectiles when the airbag de ­
ploys and cause serious persona l injury .
- Never hold th ings in your hands or on your
lap when the vehicle is in use.
- Never place accessor ies or other objec ts
(s uch as c up ho lders, telephone brackets,
note pads, navigation systems, or things
that are large, heavy, o r bulky) on the doors;
never attach then to the doors or the wind­
shield; never place them over or near or at­
tach them to the area marked
,,AIRBAG" on
the steering wheel, instrument panel or the seat backrests; never p lace them between
these a reas and yo u or any other person in
the vehicle.
- Never attach objects to the w indshield
above the passenger front airbag, s uch as
accessory GPS navigation uni ts or mus ic
players . S uch objects could ca use serio us in ­
jury in a collision, especially when the air­ bags inflate.
- Never recline the front passenger seat to transport objects . Items can also move into
the deployment area of the side a irbags or
the front a irbag during breaking o r in a sud­
den maneuver. Objects near the airbags can
fly dangerous ly through the passenger com­
partment and cause injury, particularly
when the seat is reclined and the airbags in­
flate.
274
A WARNING
A person on the front passenger seat, espe­
cially infants and small ch ildren, wi ll receive
serious in juries and can even be k illed by be­
ing too close to the airbag when it inflates .
- Although the Advanced Airbag System in your veh icle is designed to turn off the front
passenger airbag if an infant o r a small child
is on the fron t passenger sea t, nobody can
absolu tely guarantee tha t deployment un­
de r these specia l condi tions is impossible in
all conceivable situations that may happen
during the useful life of yo ur vehicle.
- The Advanced Airbag System can dep loy in
accordance with the
,. low risk" option for 3-
and 6-year-old children under the U.S. Fed­
eral Standard if a child w ith electrical capac­
itance greater than the combined capac i­
tance of a typical one-year o ld infant re­
strained in one of the forward facing or rea r­
ward-facing chi ld seats with which yo ur ve­
hicle was certified is on the front passenger
seat and the o ther conditions for airbag de-
ployment are me t.
- Accident s tatisti cs have shown th at children
are generally safer in the rear seat are a than
in the front seat ing pos ition.
- For their own s afety, all ch ildren, especi ally
12 years and younger, should alw ays ride in
the back proper ly restrained for their age
and size .
Advanced front airbag system
-
Your vehicle is equipped with a front Advanced
Airbag System in compliance with United States
Federal Motor Vehicle Safety Standard 208, as
well as Canada Motor Veh icle Safety Standard
(CMVSS) 208 as applicable at the t ime your vehi­
cle was manufactu red .
The front Advanced A irbag System supplements
the safety belts to provide add itiona l protect ion
for the driver 's and front passenger's heads and
upper bod ies in fronta l crashes. The a irbags in­
flate only in frontal impacts when the vehicle de-
ce le ra tion is high e no ugh.
II>-

LL co .... N
" N .... 0 N > co
-If you are unable to determine whether or
not a particular fuel blend meets the speci­
fications, ask your service station or its fuel
supplier.
- Do not use fuel for which the contents can­
not be identified.
- Fuel system damage and performance prob­
lems resulting from the use of fuels differ­
ent from those specified are not the respon­
sibility of Audi and are not covered under
the New Vehicle or the Emission Control
System Warranties .
- If you experience a loss of fuel economy or
driveability and performance problems due
to the use of one of these fuel blends, we
recommend that you switch to unblended
fuel.
Gasoline additives
A major concern among many auto manufactur­
ers is carbon deposit build-up caused by the type
of gasoline you use.
Although gasoline grades differ from one manu ­
facturer to another, they have certain things in
common. All gasoline grades contain substances
that can cause deposits to collect on vital engine
parts, such as fuel injectors and intake valves.
Al­
though most gasoline brands include additives to
keep engine and fuel systems clean, they are not
equally effective .
Audi recommends using TOP TIER Detergent Gas­
oline. For more information on TOP TIER Deter­
gent Gasoline, please go to the official website
(www.toptiergas .com) .
After an extended period of using inadequate
fuels, carbon deposit build-ups can rob your
en­
gine of peak performance.
(D Note
Damage or malfunction due to poor fuel qual­
ity is not covered by the Audi New Vehicle
Limited Warranty.
Checking and Filling
Refueling
Fueling
Applies to: vehicles without plug-in hybrid drive
Fig. 260 right rear side of the ve hicle: open ing the fuel
filler door
Fig. 261 Fuel filler door with attached fuel cap
Plug-in hybrid drive*: refer to the information un­
der ¢pag e 103, Refueling .
The fuel filler door is unlocked or locked by the
central locking system.
.,. Applies to: vehicles with plug-in hybrid drive:
note the information
on¢ page 103, Opening
the fuel filler door.
.,. Applies to : vehicles without plug-in hybrid
drive: to open, press on the left side of the fuel
filler
door¢ fig. 260 .
.. Unscrew the tank cap counterclockwise .
.,. Place the cap from above on the open fuel fille r
door ¢
fig. 261.
.,. Insert the fuel pump nozzle all the way into the
fuel filler neck.
.,. Begin fueling. Once the fuel pump nozzle turns
off the first time, the fuel tank is full. Do not
continue fueling, or else the expansion space in
the tank will be filled with fuel.
.,.
315

Checking and Filling
~ After the fuel pump has switched off, wait five seconds before removing it to allow the rest of
the fuel to finish dripping into the fuel tank.
~ Turn the fue l cap clockwise until you hear it
lock.
~ Close the fuel filler door and then press on the
left side until it latches .
The correct fuel type for your vehicle can be
found on a label located on the inside of the fuel
filler door. For additional information on fuel,
see
Qpage 314 .
For the tank capacity in your vehicle, refer to the
Technical Data
Qpage 382.
To reduce the risk of fuel leaking out or vapors
escaping, make sure that the fuel tank is closed
correctly. Otherwise
thP ¢..iff indicator light will
turn on.
If the centra l locking system malfunctions, the
fuel filler door may emergency release
Qpage317.
A WARNING
An improper fueling procedure and improper
handling of fuel can lead to explosions, fires,
severe burns and other injuries.
-Do not smoke and keep away from open
flames.
-The ignition must be switched off when re­
fueling.
-Cell phones, radio devices and other radio
equipment should always be switched off
when refueling. Electromagnetic rays could cause sparks and start a fire.
-If you do not insert the fuel pump nozzle all
the way into the filler tube, then fuel can
leak out. Spilled fuel can ignite and start a
fire.
-Never get into the vehicle when refueling. If
there is an exceptional situation where the
vehicle must be entered, close the door and
touch a metal surface before touching the
fuel pump nozzle again. This will reduce the
risk of electrostatic discharge that can cause
flying sparks. Sparks can start a fire when
refueling.
316
A WARNING
We recommend that you do not transport any
fuel containers in the vehicle. Fuel could leak
out of the container and ignite, especially dur­
ing an accident. This can cause explosions,
fires and injuries.
-If you must transport fuel in a fuel contain­
er, please note the following:
-Always place a fuel container on the
ground before filling. Never fill the fuel
container with fuel while it is in or on the
vehicle. Electrostatic charge can occur
while refueling and the fuel vapors could
ignite .
-For fuel containers made of metal, the
fuel pump nozzle must always maintain
contact with the container to reduce the
risk of static charge.
-Insert the fuel pump nozzle as far as pos­
sible into the filler opening while refuel­
ing.
-Follow legal requirements when using,
storing and transporting fuel containers.
-Make sure that the fuel container meets
the industry standards, for example ANSI
or ASTM F852-86.
@ Note
-Remove fuel that has overflowed onto any
vehicle components immediately to reduce
the risk of damage to the vehicle.
-Never drive until the fuel tank is completely
empty. The irregular supply of fuel that re­
sults from that can cause engine misfires.
Uncombusted fuel will enter the exhaust
system and increase the risk of damage to
the catalytic converter.
@I For the sake of the environment
Do not overfill the fuel tank, otherwise fuel
can leak out when the vehicle is warming up.
© Tips
The fuel filler door on your vehicle does not lock if you lock the vehicle from the inside us-
ing the central locking switch.
II>-