AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual https://www.carmanualsonline.info/img/6/1255/w960_1255-0.png AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual

Page 1 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-79
 
     
Transmission selector 
mechanism, disassembling 
and assembling 
     
Special tools and equipment  
     
VW295 needle bearing drift
     VW295A needle bearing drift
     VW401 thrust p

Page 2 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-80
 
  
Note:  
For the installation position of the complete selector 
mechanism in transmission   Fig. 6
 . 
1 - 
Gear lock 5th and reverse gear 
Removing and installing   Page 34
-86
2 - 
Torx

Page 3 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-81
 
  
11 - 
Roll pin 
12 - 
5th and reverse gear shift fork 
Installation position   Fig. 1 
13 - 
Shift rod for 1st and 2nd gear and for 5th 
and reverse gear 
14 - 
Ball sleeve 
Removing and in

Page 4 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-82
 
  
22 - 
Cover 
For shift rod
23 - 
Torx  bolt 20 Nm (15 ft lb)
24 - 
Shift rod 
25 - 
Sealing washer Pry out using screwdriverInstallation position   Fig. 5
Pa
ge 4 of 10 Transmission selecto

Page 5 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-83
 
    
Fig. 1  Installation position of 5th and reverse gear shift fork and 
coupling plate for shift rod 
Dimension -a-: 55 mm (2.165 in.)Dimension -b-: 60 mm (2.362 in.)
    
Fig. 2  Removing

Page 6 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-84
 
    
Fig. 3  Removing bushing for 3rd and 4th gear shift rod
A - Internal puller 22-28 mm, e.g. Kukko 21/4 extractor, in conjunction 
with VW771 slide hammer-complete set.
    
Fig. 4  Driving

Page 7 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-85
 
    
Dimension -a- : 1 mm (0.039 in.)  Fig. 5  Installation position of sealing washer
-  Lubricate sealing lip and dust lip with gear oil.
-  Lightly oil outer circumference of seal.
    
Fig

Page 8 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-86
      
Removing and installing gear lock for 5th and 
reverse gear  
    
-  Remove heat shield (arrow -2-) above right drive axle.
-  Detach heat shield (arrow -1-) above right drive axle and p

Page 9 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-87
      
Assembling gear lock 
    
-  Insert spring -1- into housing -2- and, while applying light pressure, turn 
spring to left until it locates in base of housing. 
-  Insert bushing -3- onto

Page 10 of 10

AUDI A4 1995 B5 / 1.G 01A Transmission Selector Mechanism Assembly Workshop Manual 34-88
 
    
Installation position of complete gear lock in transmission:  
The recess (arrow -A-) faces bolt (arrow -B-)  
Pa
ge 10 of 10 Transmission selector mechanism, disassemblin
g and assemblin