lock AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual A4 1995 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1117/w960_1117-0.png AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual

Page 17 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 23
      
Plenum chamber and water drain valve, 
checking for debris, cleaning if 
necessary
 
     
-  Check plenum chamber for signs of debris, e.g. 
from leaves,clean If necessary. 
     
-  Check

Page 18 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 24
 
  
Lock carrier, moving into service position
 
Special tools  
 
3369
1 - 
45 Nm 
2 - 
45 Nm 
3 - 
10 Nm 
4 - 
10 Nm 
5 - 
Hole 
For tool 3369
6 - 
Hole in lock carrier 
7 - 
Hole in fender pane

Page 19 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 25
 
  
-  Remove front bumper   Repair Manual, Body 
Exterior, Repair Group 63
 . 
-  Undo 3 quick-release fasteners on noise 
insulation at front. 
-  Remove air duct between lock carrier and air 
c

Page 20 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 26
 
  
-  Thread special tool 3369 into hole -5- (left).
-  Remove bolts -1- and -3-.
-  Remove bolts -4- and pull whole lock carrier out 
as far as it will go. 
-  Secure lock carrier with suitable

Page 21 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 27
      
V-belt and ribbed belts, replacing (4-
cylinder engine AEB)
 
     
Lock carrier must be in service position   Page 24
 
     
Removing  
     
Vehicles with air conditioner  
     
-  Remov

Page 22 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 28
      
Note:  
    
The tensioning element for the ribbed belt can be locked in position by 
inserting a suitable hex key (arrow) or mandrel 3204 into the securing 
hole. 
-  Remove ribbed belt and

Page 30 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 35
 
    
The Poly-ribbed belt is removed by rotating tensioner in a clockwise 
direction with a 17mm wrench or socket. Hold tensioner in place during 
belt removal with Drift 3204.  
Note:  
When rem

Page 39 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 41
      
-  Press keys -0- and -2- to select address code -
02- "Transmission Electronics", and confirm with 
key -Q-. 
     
- 
Press   key to advance program.     
-  Press keys -0- and -8- to sele

Page 52 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 52
      
Brake system - visual inspection
 
     
WARNING! 
     
Any defects found must be repaired.
     
-  Inspect brake master cylinder, vacuum brake 
booster, hydraulic unit, brake pressure reg

Page 58 of 111

AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual 58
      
Transport locks, removing
 
      On certain vehicle versions, blocking elements -
1- (in a luminous color) are installed in the front 
suspension struts. These models are 
recognizable by a
Page:   1-10 11-20 next >