wheel bolt torque AUDI A4 1995 B5 / 1.G Suspension Rear Axle Front Wheel Drive Workshop Manual

42-1


Rear axle, servicing (front-
wheel-drive vehicles) WARNING!
CAUTION!
If using power tools (pneumatic or electric), do
not tighten the bolted connections more than
hand-tight. Otherwise, the specified tightening
torques could be exceeded.
Do not attempt to weld and/or straighten the
axle beam.
Do not re-use fasteners that are worn or
deformed in normal use.
Some fasteners are designed to be used only
once, and are unreliable and may fail if used
a second time. This includes, but is not
limited to, nuts, bolts, washers, circlips and
cotter pins. Always follow recommendations
in this manual-replace these fasteners with
new parts where indicated, and any other
time it is deemed necessary by inspection.
Pa
ge 1 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-13

CAUTION!

Vehicle must be standing on its wheels when
tightening guide bushing to rear axle bolts.
Otherwise bonded rubber bushings will be
subjected to torsion resulting in shortened
service life

- Tighten guide bushing bolts ( page 42
-2 ,
items -3- and -5-).

Tightening torque: 80 Nm (59 ft lb) + 1/4-turn
(90 )
CAUTION!

Vehicle must be standing on its wheels when
tightening suspension strut to rear axle bolts.
Otherwise bonded rubber bushings will be
subjected to torsion resulting in shortened
service life

- Tighten suspension strut to axle beam bolts (
page 42
-2 , items -6- and -8-).

Tightening torque: 50 Nm (37 ft lb) + 1/4-turn
(90 )
-
On vehicles with headlight range control, tighten
bolted connection between headlight range
Pa
ge 15 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1