AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual

AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual A4 1995 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1171/w960_1171-0.png AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual

Page 1 of 6

AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual 40-11
 
     
Running change from 
connecting link with ball joint 
to connecting link with rubber 
bushing (m.y. 1999  ) 
    
Connecting link with ball joint  
1 - Connecting link with ball joint
2

Page 2 of 6

AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual 40-12
      
Connecting link with rubber bushing  
    
Connecting link -A- for left side of vehicle.  
Permanently installed spacer -1- at connecting link must be installed at 
stabilizer bar.  
Conn

Page 3 of 6

AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual 40-13
       Bonded rubber bushings can only be turned a 
limited amount. Therefore only tighten bolted 
connections at the suspension links when the 
vehicle is standing on the ground.  
    
1 - Con

Page 4 of 6

AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual 40-14
 
  
Headlight range adjuster, removing and 
installing
 
Through m.y. 1998 on vehicles with xenon 
headlights, a headlight range adjuster may be 
installed in the left headlight.  
Arrow points

Page 5 of 6

AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual 40-15
 
  
8 - 
Rod for headlight range adjuster 
9 - 
Protrusions 
Position clamp between two protrusions
10 - 
Lower track control link 
Pa
ge 5 of 6 Runnin
g chan
ge from connectin
g link with ball

Page 6 of 6

AUDI A4 1995 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual 40-16
       When removing and installing the lower track 
control link, the clamp must be removed  
     
Note:  
     Attach the rod for headlight range adjuster to the 
level sensor, using a 10 mm