wheel torque AUDI A4 1995 B5 / 1.G Suspension Wheel Bearing Housing Remove And Install Workshop Manual

40-58

Installing

- Install wheel bearing housing.

- Slide drive axle outer CV joint into wheel hub
and tighten new bolt hand tight.

- Install ball joints for lower track control link and
and guide link in wheel bearing housing.

- Install new self-locking nuts and tighten to: 100
Nm (74 ft lb).

- If necessary, counterhold ball joint using 4 mm
hex wrench.

- Install both upper link ball joints into wheel
bearing housing.

- Install new self-locking nut -1- and tighten to 40 Nm (30 ft lb).
- Press upper links downward as far as possible when tightening.
- Install tie rod end and new self locking nut -4-.
Tightening torque: 50 Nm (37 ft lb)
- Tighten bolt -3-.
Max tightening torque: 5 Nm (44 in. lb)
Pa
ge 6 of 17 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.5

40-59

- Install ABS wheel speed sensor.

- Attach linkage for headlight range control
page 40
-14
.

- Bolt on brake splash guard.

Tightening torque: 10 Nm (7 ft lb)

- Install brake disc.

- Install brake caliper and tighten bolts to 120 Nm
(89 ft lb).

- Install wheels and tighten wheel lugs to 120 Nm
(89 ft lb).

- Install new bolt for drive axle.

Tightening torques:


M14: 115 Nm (85 ft lb) + 1/2-turn (180 )


M16: 190 Nm (140 ft lb) + 1/2-turn (180 )

WARNING!
Pa
ge 7 of 17 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.5