differential AUDI A4 1996 B5 / 1.G 01A Transmission Drive Pinion And Hollow Shaft Assembly Workshop Manual

35-30


When the bolt is tightened, the outer race will be pulled out of the
housing. Fig. 1 Pulling out double tapered roller bearing outer race
- Remove differential Page 39
-16
.
- Place pressure piece of 3128 bushing puller below outer race.
- Install threaded part of 3128 bushing puller using VW401 thrust plate
onto transmission housing.

Note:
When pressing off, the inner ring of the double tapered roller bearing is
damaged. Fig. 2 Pressing off double tapered roller bearing inner race
- Remove circlip before pressing off.
- Outer race -A- must be installed to press off inner race.
Pa
ge 12 of 25 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.35.3