display AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide

AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1005/w960_1005-0.png AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide

Page 23 of 37

AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide 24-100
      
- 
Press  button.     
-  Select "End Output" function 06 and press -Q- 
button to confirm input. 
      If a display did NOT change, even though coding 
is OK:  
     
-  Connect VAG 15

Page 26 of 37

AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide -  Test drive and select "Read Measuring Value 
Block" function 08, display group 004   page 
01
-249
 . 
Pa
ge 26 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/se

Page 27 of 37

AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide 24-102
 
Read measuring value block 4 1 2 3 4
    
Indicated on display; note display field 4  
Notes:  
Due to its short signal duration, shifting cannot always be observed on the 
VAG 1551 scan tool

Page 31 of 37

AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide 24-106
      
-  Switch ignition ON.
     
-  Using VAG 1551 scan tool, select "Read 
Measuring Value Block" function 08, display 
group 027, display field 1   page 01
-249
 . 
Read measuring value bl

Page 33 of 37

AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide 24-108
      
-  Switch ignition ON.
     
-  Using VAG 1551 scan tool, select "Read 
Measuring Value Block" function 08, display 
group 027, display field 2   page 01
-249
 . 
Read measuring value bl

Page 36 of 37

AUDI A4 1996 B5 / 1.G AFC Engine Auxiliary Input Signals Checking User Guide 24-110
      
-  Find and eliminate open or short circuit; repair 
as necessary. 
      If wiring is OK:  
     
-  Replace ABS control module.
      If the ABS control module is OK, but the 
malfunct
Page:   < prev 1-10 11-20