clock AUDI A4 1996 B5 / 1.G AWM Engine Assembly Workshop Manual

13-20

Installing

- Attach ribbed belt to pulleys from crankshaft and
vane pump and, if necessary, pull up with
auxiliary tool.

- Swivel tensioner for ribbed belt in direction of arrow.
- Install ribbed belt over Generator pulley last. Release tensioner.
- Check that ribbed belt is properly seated.
- Fit ribbed belt for A/C compressor.

Ribbed belt routing Fig. 2
, Page 13
-17

- Attach torque wrench at "7 o'clock position" as illustrated to hex on
tensioner and pretension to 30 Nm.
- While tensioning, tighten bolts -A- to 23 Nm.
- Start engine and check belt running.
Pa
ge 20 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1

13-34

- Actuate all window switches again for at least
one second in the "close" direction to activate
the automatic open/close function.

- Set clock to correct time.

Tightening torques

Component

Nm
Bracket for Generator, power steering
pump and viscous fan to cylinder block
52
1)
Support for intake manifold
to intake manifold 20
to bracket 20
Power steering pump to bracket 23
Pulley to coolant pump 23
Generator at bracket
M8 23
M10 46
Ribbed belt tensioner to bracket
23
Pa
ge 34 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1