warning AUDI A4 1996 B5 / 1.G Suspension Front Axle Components Workshop Manual

40-17


Front drive axles, removing
and installing

WARNING!

Do not re-use any fasteners that are worn or
deformed in normal use.
Some fasteners are designed to be used only
once, and are unreliable and may fail if used
a second time. This includes, but is not
limited to, nuts, bolts, washers, circlips and
cotter pins. Always follow the
recommendations in this manual-replace
these fasteners with new parts where
indicated, and any other time it is deemed
necessary by inspection.

Removing

- Remove wheel trim.

On light-alloy wheels use puller in vehicle tool kit
to remove trim cap

- Remove collar bolt for drive axle.

WARNING!

The vehicle must be standing on its wheels
Pa
ge 1 of 26 Front drive axles, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.3

(180 )


M16 bolt: 190 Nm (140 ft lb) + 1/2-turn
(180 )

WARNING!

The vehicle must be standing on its wheels
when loosening or tightening the collar bolt
for the drive axle (item - 17 -, page Page 40
-
4 ). Otherwise the risk of an accident exists.
Pa
ge 5 of 26 Front drive axles, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.3