ECU AUDI A4 1997 B5 / 1.G APB Engine Exhaust System Components Workshop Manual

26-7


- Unbolt heat shield -2- on turbocharger.
- Remove upper bolt -3- securing front exhaust pipe to turbocharger.

- Unbolt guard plate -arrows- above drive shaft from transmission.
- Unbolt drive shaft -1- at transmission and tie up.
Pa
ge 7 of 30 Exhaust s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.26.1

26-11

Exhaust system, aligning free of stress

Align the exhaust system as follows to avoid
stresses in the system and prevent the
transmission of noise into the body:

Notes:

Before assembling the exhaust system, the
front exhaust pipes and the catalytic converters
must be aligned accurately and secured.
Loosen all bolted connections on the exhaust
system (except exhaust manifold and flange
mountings, catalytic converter/intermediate
pipe).
The exhaust system must be aligned when it is
cold.
Keep to the sequence described below.
The dimensions in the illustrations are
approximate.
Pa
ge 11 of 30 Exhaust s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.26.1