AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1241/w960_1241-0.png AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual

Page 1 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-68
 
     
Driveshaft, servicing 
     
CAUTION! 
     
Refer to general repair instructions   Page 00
-14
 . 
     
Do not bend the driveshaft more than 25  at 
the center universal joint, otherwi

Page 2 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual For complaints (noise or vibrations), first 
check whether correct adjustment of the 
driveshaft resolves the problem before 
replacing the driveshaft. 
     After removing the driveshaft from the rea

Page 3 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-69
 
  
1 - 
Final drive 
2 - 
Gasket 
Always replacePull off backing foil, and attach self-
adhesive side of gasket to drive flange. De-grease drive flange
3 - 
Constant Velocity (CV) joint Maximu

Page 4 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-70
 
  
8 - 
Hex bolt 
23 Nm (17 ft lb)
9 - 
Driveshaft center bearing 
10 - 
14Driveshaft Adjusting  Page 39
-79
11 - 
16Socket-head bolt 
Always replaceSelf-locking55 Nm (41 ft lb)Bolt threads in

Page 5 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-71
      
Driveshaft, removing and installing
 
     
Special tools and equipment  
     
3298 alignment fixture for all wheel drive 
driveshaft 
     3139/2 adapter 
     
- Observe all cautions

Page 6 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-72
      
Removing  
     
-  Remove heat shield above driveshaft.
    
-  Remove heat shield for driveshaft from cover of Torsen differential 
(arrows). 
    
Note:  
Marking the shaft is only nec

Page 7 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-73
      
-  Remove three upper mounting bolts on each 
driveshaft constant velocity joint. 
     
-  Loosen mounting bolts of center bearing 
slightly. 
    
-  Install two 3139/2 adapters, in 329

Page 8 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-74
      
-  Remove driveshaft at transmission drive flange 
using assembly tool. 
     
Note:  
     Driveshaft must always be kept in extended 
position for transportation and storage. 
     
Ins

Page 9 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-75
      
Notes continued:  
    
To prevent imbalance, the flanges of the driveshaft (arrow -A-) and of 
the final drive (arrow -B-) must be installed so that the factory color 
markings (or the m

Page 10 of 10

AUDI A4 1998 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual 39-76
      
-  Align exhaust system free of stress.
       Repair Manual, Engine Mechanical, Repair 
Group 26       
Tightening torques  
     
Component  
  
Tightening 
torque  
Driveshaft to trans