AUDI A4 1998 B5 / 1.G 01V Transmission Front Final Drive Service User Guide
A4 1998 B5 / 1.G
AUDI
AUDI
https://www.carmanualsonline.info/img/6/1195/w960_1195-0.png
AUDI A4 1998 B5 / 1.G 01V Transmission Front Final Drive Service User Guide
Page 27 of 37
39-29
Notes:
A faulty seal lets ATF or gear oil escape into the
converter housing via the center vent of the
shaft seal (between the two sealing lips).
In addition, a faulty seal can let ATF escape
into the center differential. It over-fills and oil
escapes at the differential vent.
Removing
- Loosen bolt drive axle/wheel hub while the
vehicle is still standing on its wheels.
- Remove front wheels.
- Remove heat shield for right drive axle.
- Remove drive axles:
Repair Manual, Suspension, Wheels,
Steering, Repair Group 40; Drive axle, removing and installing
Pa
ge 27 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2
Page 32 of 37
39-34
Tightening sequence:
Repair Manual, Suspension, Wheels, Steering, Repair Group 40; Drive axle, removing and installing
- Install cover for final drive.
1. Stage: Tighten bolts 1 to 3 by hand2. Stage: Tighten bolts 1 to 12 in mentioned sequence to tightening
torque.
- Install right drive flange.
- Install right transmission support page 37
-125
.
- Installing drive axles: - Top-up and check gear oil in front final drive page 39
-1 .
Pa
ge 32 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2
Page 34 of 37
39-36
O-ring at cover for final drive, replacing
Special tools and equipment
Removing
Repair Manual, Engine Mechanical, Repair Group 26; removing and
installing exhaust system.
VAG1306 drip tray
- Loosen bolt drive axle/wheel hub while the vehicle is still standing on
its wheels.
- Remove right wheel.
- Remove heat shield for right drive axle.
- Remove right front exhaust pipe:
Pa
ge 34 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2
Page 35 of 37
39-37
- Remove right drive axle:
Repair Manual, Suspension, Wheels,
Steering, Repair Group 40; Drive axle, removing and installing
- Remove right transmission support page 37
-
125
.
- Remove bolt for flange shaft (arrow) while securing against turning
using a drift.
- Place VAG1306 drip tray underneath.
- Remove right drive flange.
- Remove bolts for final drive cover opposite of shown tightening
sequence and remove cover.
Pa
ge 35 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2
Page 37 of 37
39-39
- Install right transmission support page 37
-
125
.
- Install drive axle.
Repair Manual, Suspension, Wheels,
Steering, Repair Group 40; Drive axle, removing and installing
- Top-up and check gear oil in front final drive
page 39
-1 .
Tightening torques
Component
Nm
Cover for front final drive to transmission
housing
23
Drive flange to transmission 23
Heat shield for driveshaft to transmission
23
Pa
ge 37 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2
