AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/903/w960_903-0.png AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual

Page 1 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-98
 
     
Trim (Avant) 
     
Tailgate trim, removing and installing
 
    
Note:  
When installing the lower trim, guide bars must be inserted in upper trim.  - Remove bolt -1-.
-  Tightening tor

Page 2 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-99
      
C-pillar trim, removing and installing
 
     
-  Remove side panel   page 72
-75
 .
     
-  Remove side trim   page 70
-102
 .
    
Note:  
When installing, ensure retaining clips are p

Page 3 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-100
      
D-pillar trim, removing and installing
 
     
-  Remove side panel   page 72
-75
 .
     
-  Remove side trim   page 70
-102
 .
     
Removing  
     
-  Remove D-pillar trim (use assem

Page 4 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual Current retaining clips are not right-angled. If clips were 
separated from D-pillar trim during removal, they must be 
repositioned at the correct angle. 
Pa
ge 4 of 9 Trim 
(Avant
)
11/20/2002 htt
p

Page 5 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-101
      
Roof panel trim, removing and installing
 
     
-  Remove side panel   page 72
-75
 .
     
-  Remove rear panel trim   page 70
-103
 .
     
-  Remove side trim   page 70
-102
 .

Page 6 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-102
      
Left and right-side trim, removing and 
installing
 
     
-  Remove side panel   page 72
-75
 .
     
-  Remove tailgate seal in area of loading 
edge/side panels. 
     
-  Remove load

Page 7 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-103
      
Rear panel trim, removing and installing
 
     
-  Remove tailgate seal in area near trim.
     
-  Remove bolts (2x).
     
   Tightening torque: 1.5 Nm (13 in. lb)
    
Note:  
When i

Page 8 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-104
      
Tie-down (Avant), removing and 
installing
 
     
-  Remove bolts (2x) for each tie-down.
     
   Tightening torque: 4.5 Nm (40 in. lb)
     
-  Remove trunk mat.
     
-  Remove side

Page 9 of 9

AUDI A4 1998 B5 / 1.G Trim Avant Workshop Manual 70-105
 
    
Tightening torques for rear brackets:  
   Bolt in floor: 23 Nm (17 ft lb)
   Bolt in rear panel: 10 Nm (7 ft lb)
Pa
ge 9 of 9 Trim 
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servl