ESP AUDI A4 1998 B5 / 1.G AWM Engine Additional Signals Checking Workshop Manual

24-181


Display on VAS5051:
When a control module responds with its identification, the display
indicates the number of stored errors or indicates "no malfunctions
recognized".
DTCs stored in the system are indicated in sequence and printed out.
Then the VAG1551 scan tool sends the next address word.
If a malfunction related to the"powertrain databus" or the "CAN-bus" is
indicated:
If the correct control modules are installed: - In selection -1-, press diagnostic function "00 - Check DTC memory -
complete system".

DTC memory of all OBD capable systems in the vehicle will be
checked.
- Check whether the Engine Control Module (ECM) and other CAN
capable control modules installed are appropriate for this vehicle (part
no. and coding).
- Check to be sure the multi-pin connectors of the control modules are
securely connected.
Pa
ge 20 of 25 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.24.5