dimensions AUDI A4 1998 B5 / 1.G Hood Workshop Manual

55-1


Hood Hood, removing, installing and adjusting

1 -
Hood
Removing:
- Disconnect hose to windshield washer
system and unclip.
Second person is needed to support and
lift hood during removal
- Disconnect gas-filled strut -2- from hood
-1-.
- Remove bolts -6-.
- Remove hood.
Installing:
- Install in reverse order of removal.
Adjusting:
- Align hood -1- between fenders.
- Adjust height of hood at hood lock Fig.
4 Page 55
-7 .
Hood can be adjusted for height relative to
fenders by adjusting stop buffers -4- Fig. 2 Page 55
-6
Panel gap dimensions Fig. 5
Page
55
-7
Pa
ge 1 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.55.1

55-7


Fig. 4 Removing and installing lower section of hood lock
- Disengage hood lock cable page 55
-10
.
- Remove bolts -2- (4x).
Tightening torque: 10 Nm (7 ft lb)
- Remove lower section of lock -3-.
1 - Lock carrier
- To adjust hood, move lower section of lock up or down as required.

Gap dimensions can be checked using 3371 adjustment gauge.
Dimension -a- 3.0 mm Fig. 5 Panel gap dimensions
Pa
ge 7 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.55.1