radiator AUDI A4 1998 B5 / 1.G Hood Workshop Manual

55-6


Note:
The stop buffers can be used for adjusting the height of the hood. Fig. 2 Adjusting height of stop buffers
- When hood is closed, stop buffer -3- (2x external) must rest lightly on
the lock carrier.
- Turn stop buffer -1- (2x internal) in hood -2- until impact, then unscrew
one half rotation.
Marking -A- must point toward rear of vehicle.

Fig. 3 Hood latch release
- Hood lock actuator -2- must be flush with radiator grill when closed.
- Hood lock actuator must be centrally positioned relative to radiator grill.
Pa
ge 6 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.55.1

55-9

Radiator grill, removing and installing


Mounting point -A- centers radiator grill in hood.
- Place radiator grill -1- in guide notch -3- and clip into hood -2- in
direction shown by arrow -B-.
- Arrows -C- designate all retaining tabs -4-. Retaining tabs must be
unclipped individually during grill removal.
Pa
ge 9 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.55.1