tow AUDI A4 1998 B5 / 1.G Rear Bumper Workshop Manual

63-11


Rear bumper (Sedan) Rear bumper, removing and installing (
VIN 8D XA 200 000)

1 -
Metal bolt
2 -
Bracket
- To remove, remove metal bolts -1- and
take off bracket.
3 -
Clip
4 -
Spoiler
Removing and installing page 63
-10
5 -
Bumper
- To remove, unscrew combination bolts -
8-.
- Unclip bumper from bracket -2- in
direction of arrow and pull off towards
rear.
6 -
Impact absorber
Removing from bumper Fig. 1
7 -
Strengthening plate
8 -
Combination bolt
23 Nm (17 ft lb)
Pa
ge 1 of 5 Rear bum
per
(Sedan
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.3

63-13


Rear bumper, removing and installing (VIN
8D XA 200 001 )

1 -
Bumper
To remove, remove combination bolts -6-.For S4 models, an additional bolt must be
installed at the wheelhousing liner Fig. 1 . Unclip bumper from bracket -4- and
remove toward rear.
2 -
Spoiler Removing and installing page 63
-10
.
3 -
Metal bolt
1.5 Nm.
4 -
Bracket for rear bumper The bracket has two parts. The front half
can be shifted to adjust the length.
Pa
ge 3 of 5 Rear bum
per
(Sedan
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.3