AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/934/w960_934-0.png AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide

Page 11 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-11
 
  
14 - 
Generator 
Removing:
  - Disconnect battery Ground strap
 - Remove air duct hose to charge air 
cooler. 
 - Loosen ribbed belt and take belt off 
Generator  Page 13
-18
 . 
 - Remove

Page 12 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-12
 
  
 Repair Manual, Suspension, Wheels, Steering, 
Repair Group 48
    15 - 
45 Nm 
16 - 
Support 
For intake manifold
17 - 
20 Nm 
18 - 
52 Nm Apply D 000 600 when installingBolts have differe

Page 13 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-13
 
  
22 - 
Pulley 
For power steering pumpInstallation position: Open side faces to 
front of vehicle 
23 - 
23 Nm 
24 - 
Ribbed bolt - 28 Nm 
25 - 
Viscous coupling Removing and installing   Pa

Page 14 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-14
 
  
Ribbed belt drive for air conditioner - 
assembly overview
 
CAUTION! 
The air conditioner refrigerant circuit must not 
be opened. 
Note:  
Mark the direction of rotation with chalk or fel

Page 15 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-15
 
  
2 - 
Air conditioner compressor 
Do not loosen or disconnect refrigerant 
hoses or lines. After removing compressor from 
mountings, secure to chassis side member 
with wire or similar. Do

Page 16 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-16
 
  
7 - 
Washer 
8 - 
23 Nm 
9 - 
Ribbed V-belt 
Removing and installing   Page 13
-18
 .
Check for wearDo not kinkRouting of ribbed belt Fig.   2
 ,   Page 
13
-17
 
10 - 
Washer 
11 - 
25 Nm

Page 17 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-17
 
    
 Parts List   
The vibration damper can only be installed in one position. The hole -
arrow- in the vibration damper must fit over the projection on the toothed 
belt sprocket.  Fig. 1  I

Page 18 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-18
      
Ribbed belt, removing and installing
 
     
Note:  
     Mark the direction of rotation with chalk or felt 
pen before removing the ribbed belt. If the belt 
rotates in the wrong directi

Page 19 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-19
 
    
Note:   -  Turn tensioner in direction of arrow to loosen ribbed belt.
-  Remove ribbed belt from Generator and release tensioner.
    
When the lock carrier is in the service position, t

Page 20 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly User Guide 13-20
      
Installing  
     
-  Attach ribbed belt to pulleys from crankshaft and 
vane pump and, if necessary, pull up with 
auxiliary tool. 
    
-  Swivel tensioner for ribbed belt in direction
Page:   < prev 1-10 11-20 21-30 31-40 41-50 50 next >