AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owner's Guide

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owner's Guide A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/934/w960_934-0.png AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owner's Guide

Page 31 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-31
      
-  Remove tensioner for ribbed belt from 
bracket. 
     
-  Remove pulley from power steering pump.
     
-  Unbolt power steering pump, move clear to one 
side and tie in place. Do not

Page 32 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-32
 
    
-  Unbolt bracket for Generator, steering pump and viscous fan -bolts 1 to 
6-. 
Pa
ge 32 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis

Page 33 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-33
      
Installing  
      Installation is carried out in the reverse order of 
removal; note the following:  
    
 Radio operating instructions    -  Install bolts -1 to 6- with locking fluid "

Page 34 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-34
      
-  Actuate all window switches again for at least 
one second in the "close" direction to activate 
the automatic open/close function. 
     
-  Set clock to correct time.
     
Tightenin

Page 35 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide Viscous fan to bearing   45  
     
1) Install with locking fluid D 000 600 A2  
Pa
ge 35 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=G

Page 36 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-35
 
  
Toothed belt drive
 
Note:  
Mark the direction of rotation with chalk or felt pen 
before removing the toothed belt. If the belt rotates 
in the wrong direction when it is reinstalled, bel

Page 37 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-36
 
  
4 - 
Toothed belt guard - top 
When installing, engage carefully in center 
toothed belt guard 
5 - 
Toothed belt Mark direction of rotation with chalk or felt 
pen before removing. Check f

Page 38 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-37
 
  
9 - 
Camshaft sprocket 
For exhaust camshaftTake off toothed belt before removing and 
installing  Page 13
-40
 
Installation position Fig.  1
 ,   Page 
13
-39
 
10 - 
Tensioner 
11 - 
Was

Page 39 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-38
 
  
15 - 
15 Nm 
16 - 
Crankshaft sprocket 
Contact surface between sprocket and 
crankshaft must be free of oil. Can only be installed in one position.
17 - 
90 Nm + 
1/4 turn (90 ) further 
A

Page 40 of 47

AUDI A4 1999 B5 / 1.G AWM Engine Assembly Owners Guide 13-39
 
    
Fig. 1  Location of camshaft sprocket
The narrow web of the camshaft sprocket faces outward -arrows- and 
the marking for TDC of cylinder 1 is visible from front. 
    
Fig. 2  Removing a
Page:   < prev 1-10 11-20 21-30 31-40 41-50 next >