AUDI A4 1999 B5 / 1.G Brakes Basic Setting 04 Repair Manual

01-297

Output Diagnostic Test Mode (DTM)
-
Release brake

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Operate brake

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: 0V
Orr: 0V
rr wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: B+
Orr: 0V
rr wheel locked

Indicated on display:
ABS hydraulic pump -V64- must start running.
The brake pedal must not give. -
Press button.
Pa
ge 61 of 64 Basic settin
g (scan tool function 04
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.15

01-298

Output Diagnostic Test Mode (DTM)
-
Irr: B+
Orr: B+
rr wheel free

Indicated on display:
ABS hydraulic pump -V64- will stop running. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: B+
Orr: 0V
rr wheel free

Indicated on display:
Brake pedal must give noticeably. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: 0V
Orr: 0V
rr wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Release brake

Indicated on display:
-
Press button.
Pa
ge 62 of 64 Basic settin
g (scan tool function 04
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.15

01-299

Output Diagnostic Test Mode (DTM)
-
Irr: B+
Orr: B+
rr wheel free

Indicated on display:

The EDL change-over valve (left) and the EDL inlet valve are activated.
ABS return flow pump -V39- runs for one second. It draws brake fluid from
the brake fluid expansion tank via the EDL inlet valve. The hydraulic pump
builds brake fluid pressure in the EDL regulated wheel cylinders. These
wheels will then be locked.
If not, this indicates a mechanical malfunction in one of the valves,
providing there is no electrical malfunction in the system. Replace
hydraulic control unit.
-
Press button.
Pa
ge 63 of 64 Basic settin
g (scan tool function 04
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.15

01-300

Output Diagnostic Test Mode (DTM)
-
End

Indicated on display:
Note:
The output diagnostic test mode is completed. The ABS/EDL warning light
and the red warning symbol for brake system go out.
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:
Note:
If the ABS/EDL warning light does not go out, this indicates a
malfunction in the system. Observe test sequence exactly page 01
-
17
.
- Press buttons -0- and -6- to select "End Output" function 06. Press -Q-
button to confirm input.
Pa
ge 64 of 64 Basic settin
g (scan tool function 04
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.15