AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual

AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1161/w960_1161-0.png AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual

Page 1 of 6

AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual 40-97
 
     
Lower guide link, removing 
and installing  
     
Removing  
     
-  Remove wheel trim.
     
   On light alloy wheels use puller in vehicle tool kit 
to remove trim cap. 
     
- Remo

Page 2 of 6

AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual Subframe must be lowered at rear to remove bolt -1-.  
-  Loosen support plate bolts -3- and subframe bolts -2-.
-  Remove guide link.
Pa
ge 2 of 6 Lower 
guide link, removin
g and installin
g
11/20/2

Page 3 of 6

AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual 40-98
      
Installing  
     
CAUTION! 
     
The bonded rubber bushings can only be 
turned to a limited extent. The bolted 
connections on the suspension links should 
therefore only be tightened

Page 4 of 6

AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual -  Install new subframe bolts -2- and tighten to 110 Nm (81 ft lb) + 1/4-
turn (90 ) 
Pa
ge 4 of 6 Lower 
guide link, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?

Page 5 of 6

AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual 40-99
      
Lower guide link hydraulic bushings, 
replacing
 
     
Special tools, test equipment and auxiliary 
items  
     
3346/2   3301   3347  
3347/1   3346/2   3347/2  
3346/3        
    
Pu

Page 6 of 6

AUDI A4 1999 B5 / 1.G Suspension Lower Guide Link Remove And Install Workshop Manual 40-100
 
    
Pulling in hydraulic bushing 
-  Insert hydraulic bushing -A- into 3347/2 special tool.
-  Tighten 3347/1 sleeve, 3346/2 spindle and nut together.
-  Pull hydraulic bushing -A- in up to