clock AUDI A4 1999 B5 / 1.G Three Way Halogen Headlights Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A4, Model: AUDI A4 1999 B5 / 1.GPages: 16, PDF Size: 0.32 MB
Page 1 of 16

94-1
 
     
Headlights, servicing 
     
Three-way halogen headlights, overview
 
     
CAUTION! 
     
Disconnect the battery Ground (GND) strap 
before working on the electrical system. 
     
Notes:  
     
Before disconnecting the battery, determine the 
correct coding for the anti-theft radio. 
     After reconnecting the battery, check and 
activate the vehicle's electrical equipment 
(radio, clock, comfort and convenience 
features, etc.) as outlined in this Repair Manual 
or the Owner's Manual. 
Pa
ge 1 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 4 of 16

94-4
      
High intensity gas discharge (Xenon) 
headlights, overview
 
     
CAUTION! 
     
Disconnect the battery Ground (GND) strap 
before working on the electrical system. 
     
Notes:  
     
Before disconnecting the battery, determine the 
correct coding for the anti-theft radio. 
     After reconnecting the battery, check and 
activate the vehicle's electrical equipment 
(radio, clock, comfort and convenience 
features, etc.) as outlined in this Repair Manual 
or the Owner's Manual. 
     Some procedures could affect the headlight 
beam adjustment, requiring that it be reset   
Page 94
-8 . 
     
       Repair Manual, Maintenance
   
     
Adjusting spray for headlights washer nozzles 
 Page 92
-17
 . 
Pa
ge 4 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 11 of 16

94-11
      
Headlight beam adjusting motor (high 
intensity gas discharge -Xenon- 
headlights), removing and installing
 
     
Note:  
     Always adjust headlights after headlight beam 
adjusting motors are removed, installed or 
replaced  Page 94
-8 . 
     
Removing  
     
-  For right headlight, remove back portion of 
intake air duct. 
     
-  Remove cover from headlight housing.
    
Installing   -  Release headlight beam adjusting motor -1- on right headlight by 
rotating clockwise and on left headlight by rotating counterclockwise. 
-  Release ball joint from its socket by pushing laterally to left on right 
headlight and push to right on left headlight. 
-  Disconnect harness connector -2-.
-  Install in reverse order of removal.
Pa
ge 11 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 12 of 16

94-12
      
High intensity gas discharge (Xenon) 
headlight bulbs, replacing
 
     
Replacing Xenon bulb for low beam 
     
Removing  
     
-  Remove cover from headlight housing.
     
WARNING! 
     
HIGH VOLTAGE! 
     
Disconnect the battery Ground (GND) strap 
before working on parts of the Xenon 
headlight which are labeled with the yellow 
high voltage symbol. 
     
Notes:  
     
Before disconnecting the battery, determine the 
correct coding for the anti-theft radio. 
     After reconnecting the battery, check and 
activate the vehicle's electrical equipment 
(radio, clock, comfort and convenience 
features, etc.) as outlined in this Repair Manual 
or the Owner's Manual. 
Pa
ge 12 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 13 of 16

94-13
 
    
Installing   -  Remove harness connector -1- on Xenon headlight and retaining ring -
2- by rotating counterclockwise. 
-  Insert new bulb into housing without touching glass with bare hands.
    
-  Place retaining ring -1- on catches -3- of Xenon lamp -2- with two 
recesses (arrows) and secure by turning clockwise. 
-  Reconnect harness connector and close housing cover.
Pa
ge 13 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 15 of 16

94-15
      
Ignitor for gas discharge lamps -N195- 
(Xenon), removing and installing
 
     
WARNING! 
     
HIGH VOLTAGE! 
     
Disconnect the battery Ground (GND) strap 
before working on parts of the Xenon 
headlight which are labeled with the yellow 
high voltage symbol. 
     
Notes:  
     
Before disconnecting the battery, determine the 
correct coding for the anti-theft radio. 
     After reconnecting the battery, check and 
activate the vehicle's electrical equipment 
(radio, clock, comfort and convenience 
features, etc.) as outlined in this Repair Manual 
or the Owner's Manual. 
     
Removing  
     
-  Remove cover from headlight housing.
    
-  Remove harness connector -1- on Xenon bulb by rotating 
counterclockwise. 
Pa
ge 15 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1