high beam AUDI A4 1999 B5 / 1.G Three Way Halogen Headlights Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A4, Model: AUDI A4 1999 B5 / 1.GPages: 16, PDF Size: 0.32 MB
Page 3 of 16

94-3
 
  
6 - 
High beam bulb 
12 V, 55 W (H7)
7 - 
Front fog light bulb 12 V, 55 W (H1)
8 - 
Low beam bulb 12 V, 55 W (H7)
9 - 
Wiring with harness connector 
10 - 
Trim strip Clipped onto headlight housing
11 - 
Fixed bearing for reflector Only on vehicles without headlight 
automatic vertical aim control 
12 - 
Cover Press lock down and remove toward rear
13 - 
Headlight housing 
14 - 
Bulb socket 
15 - 
Turn signal bulb 12 V, 21 W, orange
16 - 
Turn signal lens Removing and installing   Page 94
-21
Pa
ge 3 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 4 of 16

94-4
      
High intensity gas discharge (Xenon) 
headlights, overview
 
     
CAUTION! 
     
Disconnect the battery Ground (GND) strap 
before working on the electrical system. 
     
Notes:  
     
Before disconnecting the battery, determine the 
correct coding for the anti-theft radio. 
     After reconnecting the battery, check and 
activate the vehicle's electrical equipment 
(radio, clock, comfort and convenience 
features, etc.) as outlined in this Repair Manual 
or the Owner's Manual. 
     Some procedures could affect the headlight 
beam adjustment, requiring that it be reset   
Page 94
-8 . 
     
       Repair Manual, Maintenance
   
     
Adjusting spray for headlights washer nozzles 
 Page 92
-17
 . 
Pa
ge 4 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 5 of 16

94-5
 
  
1 - 
Housing cover 
2 - 
Xenon bulb 
12 V, 35 WReplacing  Page 94
-12
3 - 
Headlight housing 
4 - 
High beam bulb 
12 V, 55 W (H7)Replacing  Page 94
-14
5 - 
Headlight beam adjusting motor -V48-/-
V49- 
Removing and installing   Page 94
-11
6 - 
Igniter for gas discharge lamps -N195- 
(Xenon) 
Removing and installing   Page 94
-15
Pa
ge 5 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 11 of 16

94-11
      
Headlight beam adjusting motor (high 
intensity gas discharge -Xenon- 
headlights), removing and installing
 
     
Note:  
     Always adjust headlights after headlight beam 
adjusting motors are removed, installed or 
replaced  Page 94
-8 . 
     
Removing  
     
-  For right headlight, remove back portion of 
intake air duct. 
     
-  Remove cover from headlight housing.
    
Installing   -  Release headlight beam adjusting motor -1- on right headlight by 
rotating clockwise and on left headlight by rotating counterclockwise. 
-  Release ball joint from its socket by pushing laterally to left on right 
headlight and push to right on left headlight. 
-  Disconnect harness connector -2-.
-  Install in reverse order of removal.
Pa
ge 11 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 12 of 16

94-12
      
High intensity gas discharge (Xenon) 
headlight bulbs, replacing
 
     
Replacing Xenon bulb for low beam 
     
Removing  
     
-  Remove cover from headlight housing.
     
WARNING! 
     
HIGH VOLTAGE! 
     
Disconnect the battery Ground (GND) strap 
before working on parts of the Xenon 
headlight which are labeled with the yellow 
high voltage symbol. 
     
Notes:  
     
Before disconnecting the battery, determine the 
correct coding for the anti-theft radio. 
     After reconnecting the battery, check and 
activate the vehicle's electrical equipment 
(radio, clock, comfort and convenience 
features, etc.) as outlined in this Repair Manual 
or the Owner's Manual. 
Pa
ge 12 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1 
Page 14 of 16

94-14
      
Replacing high beam bulbs 
     
Removing  
     
-  Remove back portion of intake air duct on right 
headlight. 
     
-  Remove cover from headlight housing.
    
Installing   -  Disconnect harness connector -1-.
-  Release bulb retaining spring -2- and remove from housing.
-  Insert new bulb into housing without touching glass with bare hands.
-  Secure bulb with bulb retaining spring.
-  Reconnect harness connector and close housing cover.
-  Secure housing cover with bulb retaining spring.
Pa
ge 14 of 16 Headli
ghts, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.1