display AUDI A4 2000 B5 / 1.G Brakes Code Control Module Workshop Manual

01-57

- Connect the VAG1551 Scan Tool (ST) and
select "Brake Electronics" via address word 03
page 01
-4 .

- Check the control module version page 01
-52

and press the button.

Notes:

During control module identification, a 3 or 5-
digit code must always be indicated.
If control module does not indicate coding
corresponding to vehicle, or if control module
has been replaced, code it as follows.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press buttons -0- and -7- to select "Code control module" function 03.
Rapid data transfer
Q
07 - Code control module

Indicated on display:
- Press -Q- button to confirm input.
Code control module
Q
Enter code number
XXXXX

Indicated on display:
- Enter the appropriate code number and press -Q- button to confirm
input.
Pa
ge 3 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7

01-60

4D0 907 379 X S
yst. ident.
Software ver.
Coding 00000
WSCXXXXX

Display will indicate the control module identification and the coding
entered (e.g. 00000).
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press buttons -0- and -6- to select "End Output" function 06. Press -Q-
button to confirm input.
Pa
ge 6 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7