height AUDI A4 2000 B5 / 1.G General Trim Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.GPages: 16, PDF Size: 0.32 MB
Page 4 of 16
70-75
B-pillar trim, removing and installing
Note:
Do not press button when installing. 1 -
Upper B-pillar trim
Removing:
- Unclip upper B-pillar trim -1- Fig 2
.
- Pull B-pillar trim -1- upward out of B-pillar
trim -4-.
- Disconnect three-point seat belt at door
sill page 69
-13
.
- Remove three-point seat belt from B-
pillar trim -1-.
Installing:
- Insert B-pillar trim -1- into B-pillar trim -4-
.
- Install upper B-pillar trim.
- Insert seat belt guide -5- into seat belt
height adjuster Fig 1
.
Pa
ge 4 of 16 Trim
(g
eneral
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.8
Page 5 of 16
70-76
Notes:
Function check after installing trim:
Height adjuster must audibly engage into all five
of the possible positions (even in the top
position).
Switch must return by itself to released position
after being actuated.
2 -
Anti-twist stop
3 -
Belt guide
4 -
Lower B-pillar trim
Removing:
- Remove upper B-pillar trim -1- (do not
detach three-point seat belt).
- Push back retaining tabs (2x) for B-pillar
trim at door sill.
- Remove trim -4- upward and detach from
belt guide -3-.
Installing:
Installation is the reverse of removal
5 -
Seat belt height adjuster trim
Pa
ge 5 of 16 Trim
(g
eneral
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.8
Page 6 of 16
70-77
Fig. 1 Installing upper B-pillar trim in belt height adjuster
- Guide slide with button -4- (without pressing) beginning at top and
working downward into release lever -1- of height adjuster, while
simultaneously installing pin -2- into mounting -3-.
Fig. 2 Removing B-pillar trim
- To make removal easier, use two assembly hooks -2-.
- Install assembly hooks near retaining clips.
Pa
ge 6 of 16 Trim
(g
eneral
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.8