fuel AUDI A4 2000 B5 / 1.G Instrument Cluster OBD From Model Year 2000 Workshop Manual

01-95

VAG 1551 scan tool
display Possible causes
Corrective action
00771
Sender for fuel gauge -G-

Open circuit/short
circuit to B+
Short circuit to Ground
Open circuit or short circuit between sender for fuel
gauge -G- (Front Wheel Drive/All Wheel Drive) and
instrument cluster
Sender for fuel gauge -G- (Front Wheel Drive/All
Wheel Drive) is faulty - Locate malfunction using wiring
diagram
- Repair open circuit
- - Replace Sender for fuel gauge -
G- (Front Wheel Drive/All Wheel
Drive)
00779
Outside air temperature
sensor -G17-

Open circuit/short
circuit to B+
Short circuit to Ground
Open circuit or short circuit
Outside air temperature sensor -G17- faulty - Locate malfunction using wiring
diagram
- Repair open circuit
- Replace outside air temperature
sensor -G17-
01039
Engine Coolant
Temperature (ECT) sensor
-G2-

Open circuit/short
circuit to B+
Short circuit to Ground
Open circuit or short circuit between Engine Coolant
Temperature (ECT) sensor -G2- and instrument
cluster
Engine Coolant Temperature (ECT) sensor -G2-
faulty - Locate malfunction using wiring
diagram
- Repair open circuit
- Replace Engine Coolant
Temperature (ECT) sensor -G2-
Pa
ge 20 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-101

Output Diagnostic Test Mode (scan tool
function 03)


Notes:

Output Diagnostic Test Mode is only possible
when vehicle is stationary and engine is not
running!
If malfunctions are found during output
Diagnostic Test Mode, determine cause of
malfunction and replace instrument cluster if
necessary.

During the "output Diagnostic Test Mode"
function, all actuators that are installed in the
instrument cluster and coded are activated in
sequence.
There is also a simultaneous parallel sweep
through the indicator range of all analog display
instruments (Engine Coolant Temperature
(ECT) gauge, tachometer, speedometer, fuel
gauge)
Activation of warning lamps
Activation of seat belt warning light

Pa
ge 27 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-103
The following tests are performed
simultaneously:

Sweep of coolant temperature needle through
entire display range
Sweep of tachometer needle through entire
display range
Sweep of speedometer needle through entire
display range
Sweep of fuel gauge needle through entire
display range
After sweep of display ranges, the following fixed
values are displayed:

Engine Coolant Temperature (ECT)
gauge:
1/2
Tachometer: 3000 RPM

Speedometer: 62 MPH
Fuel gauge:
1/2

Note:
Switching ignition on and off will stop any needle
Pa
ge 30 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-115

Display group overview:

Display group
number Indicated on display
001 1 = Speed
2 = Engine RPM
3 = Oil pressure switch
4 = Time
002 1 = Trip odometer
2 = Fuel gauge
3 = Tank sensor
4 = Outside air
temperature
003 1 = Coolant temperature
010 1 = Channel 30
2 = Adaptation tank
sensor
3 = Channel 9
4 = Trip odometer
011 1 = Channel 4
Pa
ge 44 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-120
Measuring value block 2

Read Measuring Value Block 2

Indicated on display:

6256 mi 43 l 82 Ohm
23.0 C



Outside air temperature
-40 to +70 C




Tank sensor
approx. 280 Ohm (empty) ... approx. 40 Ohm (full)

Fuel gauge

0 - 100 1


Display value of trip odometer

Pa
ge 52 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-122
Measuring value block 10

Read Measuring Value Block 10

Indicated on display:

Channel 30 128 Channel 9 626 mi


Input value for adaptation of odometer



Adaptation channel for odometer

Factory adjusted adaptation value

Adaptation channel of fuel gauge sender resistance range

Note:
If the value "128" in display field 2 was changed due to a customer complaint, the changed value must be transferred when
replacing instrument cluster.
Pa
ge 54 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-123
Measuring value block 11

Read Measuring Value Block 11

Indicated on display:

Channel 4 2 Channel 3 100


Factory adjusted adaptation value



Adaptation channel of fuel gauge

Selected language

1 is German
2 is English


Adaptation channel for language version of driver information display

Note:
If the value "100" in display field 4 was changed due to a customer complaint, the changed value must be transferred when
replacing instrument cluster.
Pa
ge 55 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-134
Adaptation table: Adaptation channel
Adaptation function
02 Resetting SRI after service Page 01
-136

03 Adaptation of fuel gauge Page 01
-140

04 Language version of driver information display Page 01
-143

09 Odometer Page 01
-148

18 Adaptation of auxiliary heater Page 01
-152

30 Adaptation of fuel gauge sender resistance range Page 01
-155

35 Adaptation of engine speed threshold Page 01
-158

40 Adaptation for distance driven since service Page 01
-161

41 Adaptation for time since service Page 01
-164

42 Adaptation for minimum mileage performance Page 01
-167

43 Adaptation for maximum mileage performance Page 01
-170

44 Adaptation for maximum time interval Page 01
-173

45 Adaptation for oil quality Page 01
-176

46 Adaptation for total consumption quantity (only gasoline engines) Page 01
-179

60 Adaptation powertrain data-BUS Page 01
-181

61 Adaptation comfort system data-BUS Page 01
-185

62 Adaptation information data-BUS Page 01
-188

Pa
ge 70 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-140

Adaptation of fuel consumption display Rapid data transfer
HELP
Select function XX

Indicated on display
- Press -1- and -0- and confirm by pressing the -Q- button.
Rapid data transfer
Q
10 - Adaptation

Indicated on display
- Press -Q- button to confirm input.
Adaptation Input channel number XX

Indicated on display:
Notes: - Press buttons -0- and -3-.
- Press -Q- button to confirm input.
Adaptation only for vehicles with on board computer.Value entered must be between 85% and 115%.Value must be entered in steps of 5%.If the value "100" was changed due to a customer complaint, the
changed value must be transferred when replacing instrument cluster.
Channel 3 Adaptation 100 Consumption displa
y - 1 3-

Indicated on display:
-
Press button.
Pa
ge 76 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-141

Note:
Correction of fuel consumption display is only
possible via direct input. Channel 3 Adaptation 100 Input adaptation value XXXXX

Indicated on display:
Example:
Desired input value: 90%
Keypad input: 00090 - Input desired correction value using scan tool keypad, filling initial
positions with "0".
Channel 3 Adaptation 100
Q
Input adaptation value 00090

Indicated on display:
- Press -Q- button to confirm input.
Channel 3 Adaptation 90
Q
Consumption displa
y - 1 3-

Indicated on display:
- Press -Q- button to confirm input.
Channel 3 Adaptation 90
Q
Store chan
ged value?

Indicated on display:
- Press -Q- button to confirm input.
Channel 3 Adaptation 90 Chan
ged value is stored

Indicated on display:
-
Conclude adaptation of the fuel consumption display by pressing the
Pa
ge 77 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2