AUDI A4 2014 B8 / 4.G Getting To Know

Downloaded from www.Manualslib.com manuals search engine A name tag is required to operate the voice recognition system.
1. Press the

button.

2. After the beep, say
“Store Name”
.
TEXT A4VOICE3 to 38981Do not text and drive. Message and data rates may apply.
To create a name tag:
Voice Recognition:concert radioName Tag Creation

15
4. The system will ask for the phone number. Speak the , (e.g.,
8-0-0,
5-5-5-, 1-2-3-4.)
5. If incorrect, say
“Back”
to

remove the last set of numbers.
6. If correct, say
“Store
Number”
, and the system
will confirm that is saved.
3. When prompted say the

. A second

prompt will ask you to

repeat the , (e.g. John Smith).Call by name
2. Say
“Select Name”
.
3. When prompted,

say the .
4. After name confirmation, say
“Dial”
, and the
number will be dialed.
1. Press the

button.

Important Safety Instructions and Warnings which you must read, are listed on the last panel under Voice Recognition.
16
NOTE: To confirm or play back the saved voice tags, press the

button. After the beep, say
“Play Phone Book”.
BLUETOOTH®
Pairing

Downloaded from www.Manualslib.com manuals search engine 17
Audi connect® can provide you with Google Earth™, Google Voice™ Local Search, Wi-Fi Hotspot, Online Services (fuel prices, weather

information, travel information, news feeds) and myAudi

Destinations.
1. Ensure SIM card (provided by dealer)

is present in the SIM slot.

2. Press the

function button.

3. Press the Settings control button.Audi connect
®
Configuration:
Optional Audi connect
®
Initial Setup

NOTE: Audi connect® is optional for models equipped with MMI® Navigation (Premium Plus and Prestige). Vehicle should be stationary with the parking brake engaged while performing this operation.
TEXT A4CONNECT to 38981Do not text and drive. Message and data rates may apply.
TEL
18
Audi connect
®

Downloaded from www.Manualslib.com manuals search engine Wi-Fi Configuration
6. Select a password that is at least eight characters long. The default password can be used. Or a new password can

be entered.
Optional Audi connect
®
cont.4. Select Wi-Fi settings.
5. Then select Wi-Fi active and choose Visible.
19
NOTE: Most devices use Encryption type WPA2 as the default.
9. Press the Back button, scroll to Data connection and select.
7. Select Apply settings to save your password.
8. On your device, search for Wi-Fi networks, select SSID and enter your password to establish a connection. NOTE: You may connect up to eight wireless devices at one time.
Always pay careful attention to the road, and do not drive while distracted. The features and technologies discussed are optional, may require an additional subscription with separate terms and conditions, and should be used only when it is safe and appropriate. The Wi-Fi hotspot feature is intended for passenger use only. Audi connect® services are only available where there is mobile network coverage. You can obtain more information from your current service provider.
10. Select Without request. Press the back button to exit.
Data Configuration
20
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Audi connect®.
Audi connect
®

Downloaded from www.Manualslib.com manuals search engine Your MMI® Navigation system has extraordinary capabilities to enhance your drive with user-definable views, routing selections and more. Get started with setting destinations and discover more as you become familiar with the interface. 1. Press the

function button.
2. Select the Destination control button.To set a destination:Audi NavigationSetting a Destination

21
N AV
Please drive safely. Enter destinations while vehicle is stationary away from traffic. Always pay careful attention to the road, and do not drive while distracted.3. Select Address from the

Navigation Menu.
4. Select City/Zip code field and enter information.
5. Continue by entering the

Street and House number.
6. When complete, select

Start route guidance.
TEXT A4NAV7 to 38981Do not text and drive. Message and data rates may apply.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Navigation & Infotainment.
22
Navigation

Downloaded from www.Manualslib.com manuals search engine 1. Press the

button.
2. Say
“Enter Address.”
(Other commands are available on screen.)

See Owner’s Manual for complete list of commands.
3. After the beep, speak the address; for example
“2024 Main St, Los Angeles, California.”
(Speak street number as single digits.)
The system will respond with repeating the
address for confirmation.4. System will respond, “The list is being loaded,” it will repeat the address, and then ask if you would like to start route guidance; after the beep say,
“Yes”
and guidance will begin.
To set a Destination with voice commands:Audi Navigationcont.Setting a Destination (Voice Recognition)
21
NOTE: The MMI® will display the most frequently used voice commands while waiting for your response. When pressing the button, the last navigation announcement will be repeated.

N AV
23
Google Voice
™ Local Search (Online Destinations)
*:
TEXT A4NAV8 to 38981Do not text and drive. Message and data rates may apply.
1. Press the
button.

2. Say
“Online Destinations”
followed
by a keyword such as
“Coffee Shop”
,
(e.g., bookstore, museum, pizza, etc.) The system will respond with “retrieving requested information” and display a list.
Important Safety Instructions and Warnings which you must read,

are listed on the last panel under Voice Recognition.
Cellular connectivity is dependent on available cellular signal.
*Google Voice™ Local Search requires Audi connect®, and may require an additional subscription with separate terms and conditions.
The features and technologies discussed are optional, and should be used only when it is safe and appropriate.
3. Make your selection from the list

displayed by speaking the line number, (for example 1, 2, 3, or 4). The system will confirm your selection.
4. Say
“Start route guidance”
to start

the navigation to your destination.
24
Navigation

Downloaded from www.Manualslib.com manuals search engine Automatic Climate Control
25
AUTO Setting The setting of your Climate Control System maintains the cabin temperature to your selected

temperature by regulating the temperature, fan speed and airflow. Once activated, there is no need to alter the settings. When is selected, willcome on automatically to condition the air.NOTE: AC is used to dehumidify the air
.
TEXT A4CLIMATE to 38981Do not text and drive. Message and data rates may apply.
Dual Temperature SettingsTemperature and airflow can be operated independently for each

side of the cabin using the temperature control knobs. will maintain separate temperatures for the driver and front passenger.
Synchronize Zone
s
Pres
s and hold the driver’s side temperature

control knob to synchronize both sides to the

same temperature and airflow.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Automatic Climate Control.
AUTO
26
AC
AUTO
AUTO
AutomaticClimate Control

Downloaded from www.Manualslib.com manuals search engine Airflow The airflow selector directs air to the floor, panel or defrost vents, or a combination.RecirculationThe recirculation function prevents outside air and odors from entering the cabin. It may also be used in conjunction with AC to cool the cabin more quickly.Fan SpeedFan speed is the same for both zones. Fan speed can

be adjusted by first pressing the button and then adjusting the fan speed with either the driver or

passenger control knob.Automatic Climate Controlcont.
27
Temperature
Fan speed
Airflow directions
MMI
® Display
Your climate control adjustments such as Temperature, Fan speed and Airflow can be seen on your display for convenience.NOTE: Temperature display only shown with MMI® Navigation system. The ideal fan speed to heat or cool your interior will be displayed with a on the fan speed level.
28
AutomaticClimate Control

Downloaded from www.Manualslib.com manuals search engine Windshield WipersPull the stalk toward you to spray washer fluid.WashRain Sensing WipersTo activate rain-sensing wipers:1. From the
“OFF”
position, move the wiper stalk up one click.
2. The rain sensor will automatically turn the wipers on when it begins

to rain, adjusting wipe frequency with rainfall intensity.3. The lever on the top of the stalk controls the sensitivity. Move it left for less sensitivity and right for more sensitivity. NOTE: Turn off the wipers before going through a car wash.
29
TEXT A4WIPERS to 38981Do not text and drive. Message and data rates may apply.
• “LOW”
: From the
“OFF”
position, move the wiper stalk
up two clicks.• “HIGH”
: From the
“OFF”
position, move the wiper stalk

up three clicks.Continuous Wipe• Single/quick wipe: From the
“OFF”
position,

press the wiper stalk down once briefly.

NOTE: For faster wiping, press the wiper stalk down once and hold for two seconds.Single/Quick Wipes
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Windshield Wipers.
30
WindshieldWipers

Downloaded from www.Manualslib.com manuals search engine At your desired speed, press the

button
at the end of the stalk. The set speed and the illuminated icon are shown in the Driver Information Display.To activate, pull the control stalk toward you.Set Cruising Speed Cruise ControlActivate

31
SET
CRUISE
TEXT A4CRUISE to 38981Do not text and drive. Message and data rates may apply.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under cruise control.
Changing Speed
To cancel and resume cruise control:1. Press the brake pedal or push the stalk

slightly away from you.2. The light will go off.3. To resume, pull the stalk towards you;

you will return to your set speed.Your most recently set speed appears as a small icon in the Driver Information Display. It remains in memory until you turn your Audi off.Cancel/Resume
There are three ways to change your speed:1. Accelerate or decelerate, then press


again.
2. To increase/decrease speed in 1 mph

increments, tap the stalk up or down.3. Hold the stalk up or down to

increase/decrease speed in 5 mph

increments; release when desired

speed is reached.
32
SET
CRUISECruise Control

Downloaded from www.Manualslib.com manuals search engine 1. Press the

function button.
2. Press the Time control button.

3. Using the control knob, scroll to Time source. 4. Make sure the Time source is set to GPS.5. Ensure your time zone is accurate for your location.To set time with GPS:
1. Rotate the control knob to Manual and select.

2. Turn the knob until you reach Time; select to activate.3. Turn the knob to the desired hour and press set.4. The minute display is now highlighted; repeat the selection process.5. Save the time by pressing the control knob.To manually adjust the time:
NOTE: Turn on Daylight Savings time to allow the clock to change automatically
.
Clock Setting: MMI
®
MENU
33
TEXT A4CLOCK1 to 38981Do not text and drive. Message and data rates may apply.
1. Press the

function button.
2. Press the Time/Date control button to enter the Time Setup menu.3. Rotate the control knob to time, select to highlight the hour.4. Turn the knob to the desired hour and press to set.5. The minute display is now highlighted; repeat the selection process.6. Save the time by pressing the control knob.NOTE: Vehicle should be stationary with the parking brake engaged before performing these operations.
Clock Setting:Audi concert radioTo adjust the time:

SETUP
34
TEXT A4CLOCK2 to 38981Do not text and drive. Message and data rates may apply.
Clock Setting