ECU AUDI A5 COUPE 2011 User Guide
[x] Cancel search | Manufacturer: AUDI, Model Year: 2011, Model line: A5 COUPE, Model: AUDI A5 COUPE 2011Pages: 362, PDF Size: 84.88 MB
Page 89 of 362

-Turn th e m echanical key=> fig . 85 to the right to lock th e
seatback .
- Tur n the mechanical key to the left to
unlock t h e seatback.
Parcel shelf
The par cel shelf behind the rear seatback can be used to
carry li ght items of clo thing .
& WARNING
No hea vy o r hard objects should be placed on the parcel shelf. They
are a haza rd to the vehicl e occupant s during sudden braking . The
is a risk of injur y.
0 Note
Please make sure that the heating wires for the rear window defogger
are not damage by abrasive objects .
[I] Tips
To ensure problem-free ventilation, the ventilation s lots between the
re ar win dow and the parcel shelf must not be cove red .•
Con tro ls a nd e quip
m en t Vehicle
OP-eration
Seats and storage
Applies to veh icles : w ith ski sack
Ski sack
The ski sack can be carried in th e interior with the help of
the pass-through.
Fig. 86 I n the rea r
s ea t bench : Open ing
t h e pa ss-t hr ough
Opening the trunk pass-through
- Fold the cente r armrest in the rear forward and out.
- Pull the rele ase han dle => fig . 86 -Arrow- an d fold down
th e c ove r of the pass -through i n the vehic le int erior.
- Open the rea r lid.
- Push the ski sack through the opening from the luggage
compartment.
- Secure the s ki sack =>
page 88 .
Closing the trunk pass-through
-Open the rea r lid.
- Remove the ski sack from the trunk pass -through .
- Push t he pass-through cover up inside the vehicle until it
latches .
- Raise t he cen ter armrest in the vehicle again .
Vehicle care Do-it-yourselt service Technical data
Page 90 of 362

Seats and storage
-Close the rear lid .
_6 WARNING
Objects must only be tran sported in th e ski sack s ince the ski sack
can be secured. Indi vidual objects ca nnot be secured . There is a
ri sk of injur y.
[I] Tips
• You can open the pass-thro ugh from the luggage compartment.
Push the release button down and push the cover forward .
• T he pass- through can be locked and unlocked with the vehicle
mechanical key=>
page 87, fig. 86 . •
App lies to vehicles : w ith ski s ac k
Securing the ski sack
The ski sack must be secured in the luggage compart
ment .
Fig. 87 L uggage
co mpa rt m ent :
Secu ring th e b ag Fig. 8
8 Securing the
o bjects in the s ki sack
Securing the ski sack in the luggage
compartment
- The ski sack has two be lts with hooks on the unders ide .
Hang the hooks to the rear fastening eyelets in the
luggag e compar tm ent => fig . 87.
Securing the objects in the ski sack
- Pull the safety belt taut::::> fig. 88 at the free e nd of the
belt.
[I] Tips
Make sure that the sk i sack is not stored wet .•
Roof rack
Description
Additional cargo can be carried with a roof luggage rack .
If luggage or cargo is to be carried on the roof, you must observe the
following:
• Your vehicle has aerodynam ic rai n gutters molded into the roof.
T his is why co nvent ional roof luggage racks cannot be used . We .._
Page 91 of 362

recommend using roof racks from the Audi original accessories
program.
• These approved roof racks are the basis for a complete roof rack
system . Additional attachments for the basic roof rack are necessary
to safe ly transport luggage, bicycles, surf boards, skis or small boats.
All necessary hardware for these systems is available at your autho
rized Audi dealer.
• We recommend that you keep the installation instructions for
your roof rack system together with your Owner's literature in the
vehicle .
When should the roof rack be removed?
• Before going thro ugh an automat ic car wash (it is best to ask the
car wash operator for advice).
• When not in use, to reduce fuel consumpt io n, w ind noise and to
guard against theft.
& WARNING
• Use of an unapproved roof rack or incorrect mounting of an
approved roof rack can cause the roof rack or the items attached
to it to fall off the roof onto the road.
• Objects falling from the roof of a vehicle can cause a crash and
personal injury .
• Only mount the system between the markings shown in
~ fig. 89.
• The roof rack system must be installed exactly according to the
instructions provided.
0 Note
• Your vehicle warranty does not cover any damages to the vehicle
caused by using roof racks or mounting structures not approved by
Audi for your veh icle. The same applies to damage resulting from
incorrect roof rack installat ion .
Con tro ls a nd e quip
m en t Vehicle
OP-eration
Seats and storage
• Always check the roof rack mount ings and hardware before each
trip and during a trip to make sure everyth ing is securely tightened. If
necessary, retighten the mountings and check the entire system from
time to time .
• After mounting a roof rack system, or when you transport objects
on the roof of your veh icle, the height of the vehicle is natura lly
increased . Be careful when driving under low bridges or in parking
garages for example. This could cause damage to the load and even
the vehicle itself . •
Mounting points
The roof rack must be attached only at the locations
marked.
Installation
Fig. 89 Mounting
locations for roof rack
When installing the front feet, make sure that they are positioned
exactly on the positioning bolts provided @between the side pane l
and the upper roof frame~ fig. 89. The bo lt is visible as soon as you
push back the seal from the upper roof frame using the insta llation
tool supplied with the roof rack. The rear markings ® are identified
at the uppe r edge of the side glass by two small arrowheads. .,,.
Vehicle care Do-it-yourselt service iTechnical data
Page 92 of 362
![AUDI A5 COUPE 2011 User Guide Seats and storage
& WARNING
After traveling several miles, ensure that the roof rack is secure.
[ i ] Tips
The roof rack ind icates whether it is to be mounted in the front or
AUDI A5 COUPE 2011 User Guide Seats and storage
& WARNING
After traveling several miles, ensure that the roof rack is secure.
[ i ] Tips
The roof rack ind icates whether it is to be mounted in the front or](/img/6/57583/w960_57583-91.png)
Seats and storage
& WARNING
After traveling several miles, ensure that the roof rack is secure.
[ i ] Tips
The roof rack ind icates whether it is to be mounted in the front or
back .a
Roof load
T h e cargo on the roof must be securely attached.
H andling characteristics change when cargo is trans
p orted.
The pe rmissible roof load for yo ur vehicle is 165 lb s. (75 kg ). The
roof load is a combination of the weight of the carrier system and the
c argo .
When using roof rack systems with a lower load capacity , you cannot
use the maximum permissib le roof load. In t his case, the roof rac k
can o nly be loaded to the weight limit g iven in the insta llation g uide .
& WARNING
• The cargo must be securely attached on the roof rack , other
wise you ri sk an accident .
• You must under no ci rcumstances exceed the permissible roof
load, the permissible axle loads and the permissible overall
weight of your vehicle· risk of an accident .
• Consider that when transporting heavy objects
or one with a
large surface, the handling characteristics change due to shift in
the center of gravity or the greater surface exposed to the wind. So
adapt your driving and your speed to prevailing conditions .
W For the sake of the environment
As a result of the increase wind resistance created by a roof rac k, yo ur
vehicle is using fue l unnecessari ly. So remove the roof rack after
using i t.•
Beverage holders
Front beverage holders
Fig. 90 Cent er
console : Front
bev erag e holder s
Fig. 91 Be verage
storage in th e rear
a rmrest
- You can accommodate two beverages in t his sto rage
=> fig . 9 0.
Page 114 of 362

-On the road .,.,..___ ______________ _
Ignition Lock and ignition switch
Starting engine with the key
The ignition is switched on and the engine started with
the ignition key.
Fig. 107 Ignition key
-Insert the key into the ignition lock.
-fvtanual transmission: Fully depress the clutch pedal and
move the shift lever to the neutral position.
-Automatic transmission*: Step on the brake pedal and
move the selector lever to the
P or N position.
- Press the key=> fig. 107 -the engine will start .
By pressing the key without stepping on the clutch or the brake, the
ign ition is switched on and off. With the ignition on, the steering
wheel is unlocked.
You can only remove the key with the ignition switched off . To do this,
you have to press on the key again. With an automatic transmiss ion,
the selector lever must be in the
P position.
When starting the engine, major electrical loads are switched off
temporarily . After
starting a cold engine, there may be a brief period of increased
noise because the oil pressure must first build up in the hydraulic
valve adjusters . This is normal and not a cause for concern .
If the engine should not start immediately, the starting process is
automatically stopped after a short time. Repeat starting procedure.
Driver message in the instrument cluster display
Press brake pedal to start engine
This message appears if you do not step on the brake pedal to start
the engine on a vehicle w ith an automatic transmission .
Press clutch pedal to start engine
This message appears if you do not step on the clutch pedal to start
th e engine on a vehicle with a manual transmission.
Engage N or P to start engine
This message appears when attempting to start the engine if the
selector lever for the automatic transmission is not in the
P or N posi
tion . The engine can only be started with the selector in these posi
tions.
Shift to P, otherwise vehicle can roll away. Doors do not lock if lever
is not in P.
Thi s message appears for safety reasons along with a warning signal.
It appears if the selector lever for the automatic transmission is not
in the
P position after the ignition is switched off . Move the selector
lever to the
P position, otherw ise the vehicle is not secured against
rolling away. You also cannot lock the vehicle using the locking
button on the door handle or using the remote key.
& WARNING
• Always take the key with you whenever you leave your vehicle.
Otherwise, the engine could be started or electrical equipment
such as the power windows could be operated. This can lead to
serious injury.
Page 154 of 362

-Transmission •m ___________________ _
& WARNING (continued)
- Do not accelerate while selecting a driving position . At this
time the engine must be at idle speed so that undue stre ss is
not placed on the clutches in the transmission.
- Remember : Even when stopped briefly with the automatic
transmission in D,S or R , engine power is being transmitted to
the wheels . Your vehicle could " creep" forward or backward.
When stopped, keep the brake pedal fully depressed and use
the parking brake if necessary to keep the vehicle from rolling .
• If the selector lever is unintentionally mo ved into N while you
are driving, take your foot off the accelerator p edal and wait for
the engine to return to idle speed before selecting a driv ing posi
tion .
• Never shift into R or P when the vehicle is in motion.
• Never get out of the dr iver's seat when the engine is running.
• If you must get out of the vehicle, move the selector lever
secure ly into the P position and app ly the parking brake firmly.
• If the engine must remain running, never have any driving
position engaged when checking under the hood. Make sure the
selector lever has securely engaged and is locked in P with the parking brake firmly set=>
page 267, "Engine compartment ".
Otherwi se, any increase in engine speed may set the vehicle in
motion, even with the parking brake applied. •
Applie s to v ehicl es: wi th auto matic tra nsm issi on
Selector Lever positions
This section descri bes the se lector lever positions and
driving r ang es .
Fig. 146 Dis play in
the in strument clu ster :
selecto r leve r
in posi
ti on P
Th e sele cto r lever posi tio n engaged appears nex t to the se lec tor lever
as well as in the i nstr ument clus ter disp lay .
P -Park
In this selector lever position th e transmission is mechan ically
lo ck ed. En gage
P only whe n the ve hicl e is completely stopped=> &
in "Driving the automatic t ransm ission" on page 151.
To shift in or o ut o f p osit ion P, yo u must first press and hold the bra ke
peda l
and then press t he release button in t he selecto r leve r handle
w hil e moving the selector lever to or from
P. You can shif t out of this
position on ly w it h t he i gni tion o n.
R -Reverse
Th e transm ission will automa tica lly select the lowest gear ratio when
you sh ift into reverse.
Sele ct
R o nl y when t he ve hicle is at a full stop a nd t he e ng ine is
ru nning at idle speed=>
& in "Driving th e automat ic transm issio n"
on
page 151 . ...
Page 171 of 362

___________________________________________________ H_o_ m_ e_L_ i_ n _ k_ ® __ _
Applies to vehicles : w ith Home link® un iversa l remote cont rol
Reprogramming a single button
A HomeLink ® button con be reprogrammed individually
without affecting the other button allocations .
Programming the overhead keypad
Press the appropriate Homelink® button until the indi
cator light begins flashing slowly.
At the radiator grille
1. Point the original remote control to the middle of the
radiator grille of your vehicle~
page 167, fig. 162.
2. Hold the original r emote control at a distance between O
S in . (0 -13 cm) (use the shortest distance poss ible) .
3 . Press and hold the activation button on the remote
control.
4. The emergency flashers will flash three times (after about
15-60 seconds) when the programming is successful.
Now release the button on the remote control.
- If the device utilizes a rolling code, please follow phase 3
of ~
page 167 , "Programming the Homelink® trans
mitter" for rolling code programming.
This procedure will cause the existing programming on the
Homelink ® button to be erased! •
Controls and equip
ment Safety first
App
lies to vehicles : w ith Home link® un iversa l remote cont rol
Erasing the programming of the
Homelink ® transmitter
When you erase the programming, the programming on
all three of the transmitter channels with be lost!
- Perform steps 1 to 4 as described on~ page 167, "Phase
1: programming the overhead keypad" .
When completed, the Homelink® system will b e in the programming
mode and is then ready to learn the codes for remote controlled
d evices.
[I] Tips
• Programm ed buttons canno t be e ras ed ind iv idually.
• For security reasons you are adv ised to erase the programming of
the Horne Link ® system befo re you sell your vehicle. •
Vehicle care Technical data
Page 173 of 362

Driving Safely ---------------------"~'---
Important things to do before driving
Safety is everybody's job! Vehicle and occupant safety
always depends on the informed and careful driver.
For your safety and the safety of your passengers, before
driving always:
- Make sure that all lights and signals are operating
correctly.
- Make sure that the tire pressure is correct.
- Make sure that all windows are clean and afford good visi-
bility to the outside.
- Secure all luggage and other items carefully::::>
page 93.
-Make sure that nothing can interfere with the pedals.
- Adjust front seat, head restraint and mirrors correctly for your height .
- Instruct passengers to adjust the head restraints according to their height.
- Make sure to use the right child restraint correctly to
protect children ::::,
page 215, "Child Safety".
- Sit properly in your seat and make sure that your passen gers do the same::::,
page 73, "General recommenda
tions".
- Fasten your safety belt and wear it properly. Also instruct
your passengers to fasten their safety belts properly
=:> page 181. •
Controls and equip
ment Safety first Vehicle operation
What impairs driving safety?
Safe driving is directly related to the condition of the
vehicle, the driver as well as the driver's ability to concen
trate on the road without being distracted .
The driver is responsible for the safety of the vehicle and all
of its occupants. If your ability to drive is impaired, safety
risks for everybody in the vehicle increase and you also
become a hazard to everyone else on the road::::,,& . There
fore:
Do not let yourself be distracted by passengers or by using
a cellular telephone.
NEVER drive when your driving ability is impaired (by
medications, alcohol, drugs, etc.).
- Observe all traffic laws, rules of the road and speed limits
and plain common sense .
- ALWAYS adjust your speed to road, traffic and weather
conditions.
- Take frequent breaks on long trips. Do not drive for more than two hours at a stretch.
- Do NOT drive when you are tired, under pressure or when
you are stressed .
& WARNING
Impaired driving safety increases the risk of serious personal
injury and death whenever a vehicle is being used.•
Vehicle care Do-it-yourself service Technical data
Page 176 of 362

1111....__D_ r_iv _i_ n_, g=-- S_ a _ f_e _,Ly _ ______________________________________________ _
& WARNING (continued)
• Never drive with the backrest reclined or tilted far back! The
farther the backrests are tilted back, the greater the risk of injury due to incorrect positioning of the safety belt and improper
seating position.
• Children must always ride in child safety seats~
page 215.
Special precautions apply when installing a child safety seat on
the front passenger seat~
page 190. •
Proper seating positions for passengers in
rear seats
Rear seat passengers must sit upright with both feet on
the floor consistent with their physical size and be prop
erly restrained whenever the vehicle is in use.
To reduce the risk of injury caused by an incorrect seating
position in the event of a sudden braking maneuver or an
accident , your passengers on the rear bench seat must
always observe the following :
- Make sure that the seatback is securely latched in the
upright position ~
page 84.
-Keep both feet flat in the footwell in front of the rear seat.
- Fasten and wear safety belts properly~
page 185.
-Make sure that children are always properly restrained in a
child restraint that is appropriate for their size and age
~page 215.
& WARNING
Passengers who are improperly seated on the rear seat can be seri
ously injured in a crash.
& WARNING (continued)
• Each passenger must always sit on a seat of their own and
properly fasten and wear the safety belt belonging to that seat.
• Safety belts only offer maximum protection when the seatback
is securely latched in the upright position and the safety belts are
properly positioned on the body. By not sitting upright, a rear seat
passenger increases the risk of personal injury from improperly
positioned safety belts!
• Always adjust the head restraint properly so that it can give
maximum protection. •
Proper adjustment of head restraints
Correctly adjusted head restraints are an important part
of your vehicle 's occupant restraint system and can help
to reduce the risk of injuries in accident situations .
Fig. 165 Head
restraint: viewed from
the front
The head restraints must be correctly adjusted to achieve the
best protection.
- Adjust the head restraints so the upper edge is as even as
possible with the top of your head. If that is not possible,
try to adjust the head restraint so that it is as close to this
position as possible~ fig . 165. .,
Page 178 of 362

........ _D_ r_iv _i_ n .... g=-- S_ a_f _e _Ly ,.__ ______________________________________________ _
& WARNING (continued)
• Always make sure that all vehicle occupants stay in a proper
seating position and are properly restrained whenever the vehicle
is being used. •
Driver and passenger side footwell
Applies to veh icles: w ith knee air b ags
Important safety instructions
& WARNING
Always make sure that the knee airbag can inflate without inter·
ference. Objects between yourself and the airbag can increase the
risk of injury in an accident by interfering with the way the airbag
deploys or by being pushed into you as the airbag deploys.
• No persons (children) or animals should ride in the footwell in
front of the passenger seat. If the airbag deploys, this can result in serious or fatal injuries.
• No objects of any kind should be carried in the footwell area in
front of the driver's or passenger's seat. Bulky objects (shopping bags, for example) can hamper or prevent proper deployment of
the airbag. Small objects can be thrown through the vehicle if the
airbag deploys and injure you or your passengers. •
Pedal area
Pedals
The pedals must always be free to move and must never
be interfered with by a floor mat or any other object.
Make sure that all pedals move freely without interference and that
nothing prevents them from returning to their original positions .
Only use floor mats that leave the pedal area free and can be secured
with floor mat fasteners.
If a brake circuit fails, increased brake pedal travel is required to bring
the vehicle to a full s top.
& WARNING
Pedals that cannot move freely can cause loss of vehicle control
and increase the risk of serious injury .
• Never place any objects in the driver's footwell. An object could
get into the pedal area and interfere with pedal function. In case
of sudden braking or an accident, you would not be able to brake
or accelerate!
• Always make sure that nothing can fall or move into the
driver's footwell. •
Floor mats on the driver side
Always use floor mats that can be securely attached to
the floor mat fasteners and do not interfere with the free
movement of the pedals.
- Make sure that the floor mats are properly secured and
cannot move and interfere with the pedals~& .