light AUDI A6 1995 C5 / 2.G 01E Transmission Shift Control Mechanism Workshop Manual

34-5

Selector mechanism, removing and
installing


Removing

- Unscrew shift knob from shift lever.

Note:
Shift cover is removed together with the cover for
center console.

- Slightly lift off cover for center console upward (arrows -A-).
- Pull cover slightly toward back (arrow -B-), then lift complete cover
upward.
Pa
ge 5 of 17 Shift control mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.1

34-15


Note:
The illustration shows the gear shift from the right.
Note:
The gear shift must remain in the same position while the bolt is being
tightened.
Gear shift inclined slightly backwards (approx. 7 , angle b)
- Hold gear shift in this position.
- Tighten selector rod bolt to 25 Nm.
Pa
ge 15 of 17 Shift control mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.1