AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual A6 1997 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/1300/w960_1300-0.png AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual

Page 1 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual 39-33
 
     
Drive pinion and ring gear, 
adjusting 
     
Note:  
     
Careful adjustment of the drive pinion and ring 
gear is important for the service life and smooth 
running of the final drive

Page 2 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual tapered roller bearings and shims. 
     The frictional torque measurement is only used 
as a final check to make sure that the 
adjustment is correct. 
Pa
ge 2 of 8
11/19/2002 file://C:\DOCUME~1\Bear

Page 3 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual 39-34
 
  
Gear sets, adjusting and marking
 
1 - 
Identification "0937" signifies Oerlikon 
gear set with a ratio of 37:9. 
2 - 
Pairing number (312) of final drive set. 
3 - 
Deviation (tolerance) "

Page 4 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual 39-35
 
  
R - Actual distance between ring gear axis 
and face of drive pinion at point with 
quietest running for this gear set R = Ro 
+ r 
Vo - Hypoid offset
Pa
ge 4 of 8
11/19/2002 file://C:\DOCU

Page 5 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual 39-36
      
Final drive set readjusting, 
recommended sequence
 
      The following sequence of work is recommended 
to save time when the drive pinion and ring gear 
have to be adjusted:   
     
1

Page 6 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual 39-37
 Adjustment overview
 
Note:  
If repairs have been carried out to the transmission, it is only necessary to adjust the drive pinion, ring gear or final drive set if 
components have been replac

Page 7 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual 2) Drive pinion and ring gear; only replace together.  
Pa
ge 7 of 8
11/19/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triGJMLG.htm

Page 8 of 8

AUDI A6 1997 C5 / 2.G 01E Transmission Final Drive Pinion And Ring Gear Workshop Manual 39-38
 
  
Shims, position
 
Note:  
Adjustment overview when replacing individual 
components of transmission   Page 39
-37
 . 
S1 - Adjustment shim for ring gear in cover 
for differential 
S2 - Adj