suspension AUDI A6 1999 C5 / 2.G 01V Transmission Rear Final Remove And Install Workshop Manual

39-118


- Check whether there is a factory marking (color marking) on the
driveshaft. If not, mark location of driveshaft flange -A- to rear final
drive -B- with color.
- Remove mounting bolts of driveshaft flange.

Note:
If the driveshaft cannot be pressed upward past the flange, tie up
driveshaft after lowering final drive. When lowering, secure driveshaft
against falling down and note permissible bending angle of driveshaft
Notes page 39
-73
.
Repair Manual, Suspension, Wheels, Steering, Repair Group 42;
Component allocation of rear axle (All Wheel Drive (AWD) vehicles); Drive axle, removing and installing
- Tie up driveshaft at mount for parking brake cable using wire.
- Loosen left or right drive axle from rear final drive
Pa
ge 2 of 7 Rear final drive, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.10