relay AUDI A6 2000 C5 / 2.G Changing Clutch 5Speed Manual Gearbox

‒ → Remove bolts (arrows) and pull
out the multi-function sender. ‒ → Remove relay shaft bolts (arrows). Page 5 of 115-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141337.xml?xsl=2

‒ → Unscrew detent segment (arrow)
and swivel it out. ‒ → The input shaft -A-, the drive
pinion -B-, the relay shaft -C-, the
selector rods -D- with the selector
shaft and the selector forks -E-
should be carefully pulled out
together. Installing Page 6 of 115-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141337.xml?xsl=2

Note: If the input shaft ball bearing, the input shaft or the gearbox housing are renewed, it is
necessary to re-determine the thickness of
the circlips for the input shaft =>Page 35-23, adjusting input shaft.
‒ → Swing the gearbox housing into
the position shown.
‒ The components listed below can
then be fitted more easily. ‒ → Put the input shaft -A-, the drive
pinion -B-, the relay shaft -C-, the
selector rods -D- with the selector
shaft and the selector forks -E-
together.
‒ Install these components together
into the gearbox housing.
Note:
Relay shaft -C- and the selector shaft can
also be retrofitted =>next page, Fig. N34-
0585 and Fig. V34-2120. ‒ → Turn gearbox housing and
engage 3rd gear (direction of arrow). Page 7 of 115-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141337.xml?xsl=2

‒ → Now install relay shaft -A-.
‒ Insert selector shaft -B- sideways
onto bore in gearbox housing and
assemble into mounting eye.
‒ Then turn the selector shaft carefully
in direction of arrow. ‒ → Then insert the detent segment
and bolt it tight (arrow). Page 8 of 115-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141337.xml?xsl=2

‒ → Screw in relay shaft bolts (arrows) ‒ Replace O-ring for multi-function
sender.
‒ → Carefully insert multi-function
sender and tighten (arrows). ‒ → Check that dowel sleeves for
gearbox cover -A- are fitted in
gearbox housing -B- (arrows).
‒ Apply thin coat of sealant AMV 188
001 02 to sealing surfaces.
‒ Fit gearbox cover onto gearbox
housing. ‒ → Check that dowel sleeves for Page 9 of 115-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141337.xml?xsl=2