change wheel AUDI A6 2016 Owner's Manual

-The spare tire is intended on ly for tempora­
ry and short-term use. It shou ld be replaced
as soon as possible with the normal wheel
and t ire.
- After mounting the compact spare tire, the
tire pressure must be checked as soon as
poss ible. The t ire pressure of the compact
spare tire m ust be 4.2 bar; otherwise, you
risk having an accident.
- Do not drive faster than SO mph (80 km/h).
You risk hav ing an accident .
-Avoid full-throttle accelerat ion, heavy brak­
ing, and fast cornering . You risk having an
acc ident.
- Never drive us ing more than one spare
wheel and tire . You risk having an acc ident.
- Normal summer or winter tires must not be
mounted on the compact spare wheel rim .
- For technical reasons, the use of tire chains
on the spare tire is not perm itted. If it is
necessary to drive with t ire chains, the spare
wheel m ust be mounted on the front axle i n
the even t of a flat in a rea r tire. The new ly
avail able front wheel m ust then be insta lled
in place of the rear wheel with the flat tire .
Installing the tire chain before mounting
the wheel and tire is recommended .
- Loose items in the passenger compartment
can cause ser ious personal injury during
hard braking or in an acc ident. Never store
the inflatable spare t ire or jack and too ls in
the passenger compartment.
Replacing wheels
Before changing a wheel
Observe the following precautions for your own
and your passenger's safety when changing a
wheel.
• After you experience a tire failure , pull the car
well away from moving t raff ic and try to reach
level ground before you stop¢ A-
• All passengers sho uld leave the car and move
to a safe location (fo r instance, be hind the
guardrail) ¢
A.
• Engage the parking b rake to prevent yo ur vehi­
cle from roll ing unintentionally ¢
A-
Em ergenc y ass is tanc e
• Move selecto r lever t o po sit ion P ¢ A .
• If you are towing a trai ler, unhitch the trailer
from yo ur vehicle .
• Take the
jack and the spare tire out of the lug­
gage compartment
¢page 251, ¢page 252.
A WARNING
You or your passengers could be injured while
changing a whee l if you do no t follow these
safety precaut ions:
- If you have a flat tire, move a safe distance
off the road. Turn off the eng ine, turn the
emergency f lashers on a nd use other wa rn­
ing devices to alert other motorists.
- Make sure that passenge rs wait i n a safe
p la ce away from the vehicle and well away
fr om the road and t raff ic.
- To help preven t the veh icle from moving
suddenly and possib ly slipping off the ja ck,
always fu lly set the park ing brake and bloc k
the wheel diagonally opposite the wheel be­ ing changed. When one front whee l is lifted
off the ground, placing the Automatic
Transmission in P (Park) wi ll
not prevent the
veh icle from moving.
- Before you change a wheel, be sure the
ground is level and firm. If necessary, use a
sturdy board under the jack.
- Always store the vehicle tool kit, the jack
and the replaced tire in the luggage com­
partment
¢ page 131.
(!) Tips
Before changing the wheel, you must activate
the jacking mode, so that the automat ic con­
tro ls for the Adaptive Air Suspension* do not
make it more difficult to lift the vehicle with
the jack ¢
page 255.
Changing a wheel
When you change a wheel , follow the sequence
described below step -by -step and in exactly that
order .
l. Activate the vehicle jack mode*¢ page 255. .,.
253

Emergency assistance
2. Remove the decorative wheel cover*. For
mo re deta ils see also
c::> page 254, Decora­
tiv e wheel cov ers
or c::> page 2 54, Wheels
with wheel bolt caps.
3. Loosen the wheel bolts c::> page 255 .
4. Locate the proper mounting point for the
jack and align the jack below tha t poi nt
~ pag e 255 .
5. Raise the car w ith the ja ck¢ page 255 .
6. Remove t he wheel with the flat tire an d t hen
install
the spare ¢ page 257.
7. Tighten all wheel bo lts light ly .
8. Lower the veh icle with the jack .
9. Use the whee l bolt wrench and firmly tighten
a ll whee l bolts ¢
page 255 .
10. Replace the decorative wheel cover* .
11. Deactivate the vehicle jack mode * in the
M MI: !CARI function button> ( Car )* systems
control b utton > Servicing & checks > Air
susp.: jack mode > Off .
The vehicle jack mode * switches off automatical­
ly a t sp eed s above
6 mph (10 km/h) .
_&. WARNING
Always read and fo llow all WARNIN GS and in ­
f o rm atio n ¢
A in Raisi ng the vehicle on
p age 256
an d ¢page 258.
After changing a wheel
A wheel change is not complete without th e do­
ing the following.
• Always store the veh icle tool kit, the jack* and
the replaced t ire in the luggage compartment
¢ page 131.
• Che ck the tire pressure on the sp are whee l im­
med iate ly after mo unt ing it.
• As soon as possible, have t he
tightening tor­
ques
on all whee l bo lts checked with a torque
wrench . The correct tightening torque is
90 ft
lb
(120 N m).
• Have the flat tire
replaced as soon as possible.
(D Tips
- If you notice t hat the w hee l bolts are cor ­
r oded and diffic ult to t urn w hile cha nging a
254
tir e, they s hou ld be re pla ce d b efo re yo u
check the t ightening torque .
- Drive at red uce d spee d unt il yo u ha ve the
t ightenin g torques checked .
- Aft er ch angin g a whee l, the tire pres sure i n
all fou r tires must be che cke d/cor rec ted and
t h e tire pressure mo nito ring ind icator must
be stored in the
MM I ¢ page 25 0.
, Decorative wheel covers
Applies to vehicles: with decorative w heel covers
The decorative wheel co vers must be removed
first to access the wheel bolts .
Fig. 202 Cha ng ing a w heel : Re mov ing t he w heel cover
Removing
• Insert the hook (p rovided w ith the vehicle tool
kit) i n the hole in the wheel hub cover.
• Pull off th e
decorative wheel cover ¢ fig. 202 .
Wheels with wheel bolt caps
Applies to vehicles: wit h wheel bolts with caps
The caps must be removed first from the wheel
bolts before the bolts can b e unscrewed .
Fig. 203 Cha ngi ng a w hee l: re m ovin g the w heel bo lt ca ps ..,

Emerg ency assis ta nce
button > Se rvicing & c heck s > Air sus p.: jac k
m od e> On .
.. Engage the pa rking b rake to prevent your vehi­
cle from rolling unintentionally.
.. Move the
se lect or l eve r to pos it ion P .
.. Find the mark ing (impr int) on the sill that is
nearest the whee l that will be changed
¢ fig . 205 . Behind the marking, there is a lift­
ing p oint on the sill for the vehicle jack.
.,. Vehicles with a sill: remove the cover from the
si ll before lifting the vehicle with a vehicle jack
¢ page 256.
.. Turn the vehi cle j ack located under the lift ing
point on the sill to ra ise the jack until its arm@
c> fig. 206 is located under the designated plas­
tic mount
c> .&, c>(D.
.. Al ign the jack so that its arm@ c> fig. 206 en­
gages in the des ignated lift ing po int i n the door
si ll and the movable base @ lies flat on the
ground. The base @ must be
vertical under the
l ift ing point @.
.. Wind the jack up further unt il the flat tire
comes off the ground
¢ .&, .
Position the veh icle jack on ly under the designat­
ed lifting points on the sill
c> fig. 205 . There is ex­
actly
one locat ion for each wheel. The jack must
not be positioned at any other location
c> .&. c>0 .
An un sta ble s urface under the jack can cause the
ve hicle to slip off the jack . Always provide a firm
base for the jack on the ground. If necessa ry
p lace a sturdy board or similar support under th e
jack . On
h ar d, s lippe ry surface s (such as tiles)
use a rubber mat or similar to prevent the jack
from slipping¢ &.
A WARNING
-
- You or your passengers could be injured
wh ile changing a wheel if you do not follow
these safety precaut ions:
- Position the vehicle jack only at the desig­
nated lifting points and align the jack.
Otherw ise, the vehicle jack cou ld slip and
cause an injury if it does not have suffi­
cient hold on the vehicle.
- A soft or unstable surface under the jack
may cause the vehicle to slip off the jack.
Always provide a firm base for the jack on
256
the ground. If necessary, use a sturdy board under the jack .
- On hard, slippery surface (such as tiles)
use a rubber mat or similar to prevent the
jack from slipping .
- To help prevent injury to yourself and your
passengers:
- Do not raise the veh icle until you are sure
the jack is securely engaged .
- Passengers must not remain in the vehicle
when it is jacked up.
- Make su re that passengers wait in a safe
place away from the vehicle and well away
from the road and traffic.
- Make sure jack position is correct, adjust
as necessary and then continue to ra ise
the jack .
- Changes in temperatu re or load can affect
the height of the vehicle.
(D Note
Do not lift the ve hicle by the si ll. Pos ition the
vehicle jack only at the des ignated l ift ing
po ints on the sill. Othe rwise, your veh icle will
be damaged.
(j) Tips
The vehicle jack mode* switches off automati ­
cally at speeds above 6 mph (10 km/h) .
Removing and installing the sill extension
cover
Appl ies to vehicles: with sill extension
F ig. 207 S ill: r em ovin g the cover
.,. Pull the cover down to remove it . c> fig. 207
.,. To install the cove r, insert it in the mount and
press it upwa rd until it clicks into place . The .,..

Emergency assistance
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the
right direction .
Using a spare tire with a tread pattern
intended for use in a specific direction
When using a spare ti re with a tread pa tte rn in­
tended fo r use in a spec ific d irection, p lease note
the following:
- The direct io n of rotat io n is marked by an arrow
o n the side of the tire.
- If the spare tire has to be installed in the incor­
rect d irection, use the spare tire only tempora ­
rily s ince the tire w ill not be ab le to achieve its
opt imum pe rformance cha racter istics with re­
gard to aq uaplaning, noise and we ar.
- We recommend that you pay particular atten­
t ion to this fac t during wet weathe r and t hat
yo u ad just yo ur speed to m atch road condi­
t ions.
- R eplace t he flat t ire wi th a new one a nd have it
i nsta lled on yo ur vehicle as soon as pos sible to
res to re t he handling advantages of a unidirec ­
tiona l tire .
Notes on wheel changing
Please read the information q page 238, New
tires or wheels
if you are going to use a spare tire
which is different from the tires on your vehicle.
After you change a tire:
- Check the tire pressure on the spare immedi­
ately after installation .
- Have the wheel bolt tightening torque
che cked with a torque wrench as s oon as pos­
sible by your authorized Audi dealer or a
qualified service station.
- With steel and alloy wheel rims , the wheel
bolts are correctly tightened at a torque of 90
ft lb
(120 Nm) .
- If you notice that the wheel bolt s are corroded
and difficult to turn while changing a tire ,
they should be replaced before you check the
tightening torque.
258
- Replace the flat tire with a new one and have
it installed on your vehicle as soon as possi­
ble. Remount the wheel cover.
Until then , drive with extra care and at reduced
speeds.
_& WARNING
- If you are going to equip yo ur vehicle with
tires or r ims which differ from those which
were facto ry installed, then be sure to read
the information
q page 238, New tires or
wheels.
- Always make sure the damaged wheel or
eve n a flat tire and the jack and tool kit are
properly secured in the l uggage compart­
men t and a re not loose in the passenger
compa rtme nt.
- In an accident or sudde n maneuver they
could fly forward, i njuring anyone i n the ve­
hicle .
- Always s to re damaged wheel, jack and tools
secure ly in the luggage comp artment . Oth­
e rwi se, in an a cci den t or sudden m aneuve r
t hey could
fly forwar d, causing injury to pas ­
sen gers in the veh icle.
-

.... N
0 CJ ' M I.Cl ......
pulled out when towing the vehicle and that
could cause an accident.
Rear towing loop
Only install the rear towing Loop when it is need­
ed.
0 0
Fig. 218 Rea
r bumpe r: cover
0 0 I
--
Fig. 219 Rear bumpe r: towing loop installed
There are threads located beh ind the right side of
the rear bumper where a tow ing loop can be in­
stalled . The threads are loca ted behind a cover.
.. Remove the towing loop from the vehicle tool
kit .
.. Press inward strongly to the button side of the
cap to remove it from the bumper
C? fig. 218.
.. Screw the towing loop tightly in the threaded
hole as far as it will go and tighten it with the
wheel wrench
¢ fig. 219.
Remove the towing loop when you a re done using
it and place it back in the vehicle tool kit. Always
keep the towing loop in the vehicle.
_& WARNING
If you do not screw the towing loop complete­
ly, it cou ld come out of the threaded hole
while the vehicle is being towed caus ing dam-
Emergency situations
age to the vehicle and possible serious per­
sonal injury.
Loading the vehicle onto a flat bed truck
Fig. 220 Veh icle on flat bed truck
Front hook up
.. Alig n the vehicle with the centerline of the car
carrier ramp.
.. Attach the winch hook to the front towline eye
previously installed.
Rear hook up
.. Align the vehicle with the centerl ine of the car
carrier ramp .
.. Attach the winch hook to the rear towline eye
previously installed.
(D Tips
Check carefully to make sure the hook-up is
secure before moving the car up the flatbed
truck ramp .
Vehicle transport
Whenever you have your vehicle transported, be
sure to note the following:
(D Note
Mount the tie-down chains/cables over the
running surface (c ircumference) of the tires.
Never secure the vehicle by the axle, the sus­
pension struts or the front or rear towline
eye. For technica l reasons, the pressure in the
suspension struts may change during the
transport and this will adversely affect vehicle handling.
267

Index
Mirrors dimming ... .... ................ ..... 49
Exterior mirrors . . . . . . . . . . . . . . . . . . . . . . 48
Mon itor ing the Advanced Airbag System . . 153
Multifunction steering wheel . . . . . . . . . . . . . 24
N
Natural leather care/cleaning
NHTSA 206
Contacting . . . . . . . . . . . . . . . . . . . . . . . . . 132
Night vision assist . . . . . . . . . . . . . . . . . . . . 103
Cleaning the camera . . . . . . . . . . . . . . . . . 204
Nitrogen oxide (NOx) catalytic converter
refer to AdBlue .... .................. 212
Number of seats . . . . . . . . . . . . . . . . . . . . . . 134
0
Occupant seating positions . . . . . . . . . . . . . 126
Octane rating . . . . . . . . . . . . . . . . . . . . . . . . 208
Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
OFF (four-zone automat ic cl imate control) . . 70
OFF (three- zone climate control) . . . . . . . . . . 68
Oil
refer to Engine oil . . . . . . . . . . . . . . . . . . . 218
Oil change interval . . . . . . . . . . . . . . . . . . . . . 26
On-board computer . . . . . . . . . . . . . . . . . . . . 24
On-Board Diagnostic System (OBD)
Data Link Connector (DLC) . . . . . . . . . . . . . . 28
Electronic speed limiter . . . . . . . . . . . . . . . . 29
Malfunction Indicator Lamp (MIL) . . . . . . . 28
Open door/hood/rear lid warn ing . . . . . . . . . 23
Opening..... .. .. ..................... 30
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Luggage compartment lid . . . . . . . . . . . . . . 37
Sunroof .. .. .. .. ............. .. .. .. .. 41
W indows .. .. .... ............. ...... 40
Other consumers (efficiency program) . . . . . 25
Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Owner 's Literature
5
p
Paint damage 205
Paint No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
284
Parking
Automatic transmission . . . . . . . . . . . . . . 108
Valet parking . . . . . . . . . . . . . . . . . . . . . . . . 41
Parking aid Cleaning sensors/camera . . . . . . . . . . . . . 204
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . 77
Emergency braking function . . . . . . . . . . . . 78
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Start ing from a stop . . . . . . . . . . . . . . . . . . 78
Start ing to drive w ith a trailer . . . . . . . . . . . 78
also refer to Electromechanical
parking brake . . . . . . . . . . . . . . . . . . . . . . . . 77
Parking lights . . . . . . . . . . . . . . . . . . . . . . . . . 44
Parking system Adjusting the display/warning tone . . . . . 123 Cleaning the rearview camera . . . . . . . . . . 115
Malfunction . . . . . . . . . . . . . . . . . . . . . . . . 123
Parking system plus . . . . . . . . . . . . . . . . . . 114
Peripheral cameras . .. ............. .. 118
Peripheral display . . . . . . . . . . . . . . . . . . . 114
Trailer hitch . . . . . . . . . . . . . . . . . . . . . . . . 123
also refer to Parking systems . . . . . . 114, 115
Parking systems . . . . . . . . . . . . . . . . . . . . . . 113
Rearv iewcamera ..... ............... 115
Parts replacement . . . . . . . . . . . . . . . . . . . . 275
Pass-through with ski sack . . . . . . . . . . . . . . . 66
PASSENGER AIR BAG OFF light . . . . . . . . . . 154
Passenger protection . . . . . . . . . . . . . . . . . . 184
Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Pedestrian detection . . . . . . . . . . . . . . . . . . 103
Peripheral display. ... ................. 114
Physical principles of a frontal co llision . . . 135
Polishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Po llen filter
refer to Pollutant filter . . . . . . . . . . . . . . . . 67
Pollutant filter . . . . . . . . . . . . . . . . . . . . . . . . 67
Power Windows . .... .. .. .. ............. ... 40
Power locking system Locking/unlocking the vehicle from inside . 35
Rear lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Unlocking and locking vehicle . . . . . . . . . . . 33
Power seat adjustment . . . . . . . . . . . . . . . . . 54
Power windows Child safety lock . . . . . . . . . . . . . . . . . . . . . . 39
Convenience opening . . . . . . . . . . . . . . . . . . 40
Malfunction . . . . . . . . . . . . . . . . . . . . . . . . . 41